Mode d’emploi Eureka Bon Echo Tour 600 Tente

Mode d’emploi

Always assemble your tent at home before use to ensure all parts are

in good order and you understand how to erect your tent!

1. Select a site that is level with proper drainage in the event

of a heavy rain. Remove all sharp or protruding objects that

could cause damage to the tent floor.

2. Spread out the tent body in desired location. Note the

‘front’ of the tent body will be the end that has double pins

at corner ring and pin locations. (We recommend use of a

protective ‘footprint’ or groundsheet as shown in image 1

which provides added floor protection)

3. Build two main frame poles making sure to fully insert

ferrule connections. Slide poles, always

pushing poles and never pulling, through

pole sleeves located on the top of the tent

body until they are both fully inserted and

forming an X pattern on the tent body.

(image 1)

4. Starting at one corner insert the corner

pin into the base of the pole. (image 2)

5. Move to the opposite end of the same

pole. Push the pole towards the opposite

corner to flex the pole and create a hoop.

When able, insert this corner pin into the

pole end. To help fully flex the pole you

can grab onto the end of the pole sleeve

and pull the sleeve towards you while

pushing the pole into the sleeve (image

3). When completed the tent body will

have one completed hoop but still in flat

position (image 4).

6. Repeat this step with the second pole,

inserting one pin into the pole end and

then moving to the other end, flexing the pole and making

the pin insertion. It is during this last stage when the inner

tent will take stand up shape as you flex the second pole.

When the inner tent is erected attach

tent clips to poles. Your inner tent will

now be fully assembled (image 5).

7. You can now stake the erected inner tent

by inserting stakes at each corner using the

web loops as provided (image 6). As you

stake the tent down stretch the floor to full

size.

8. Using the vestibule pole, longest of remain-

ing two poles, assemble as described and

slide through the pole sleeve located on

the roof part of the mesh vestibule. Flex

and insert corner pins into the ends of the

pole. (See image 7) Attach tent clips to

pole. Stretch out the front corners of the

vestibule and stake out as shown in

image 8

9. Spread out the fly sheet on the ground with

the underside facing up. Assemble the fly

pole. Locate the two pole pockets, see

image 9, on the underside of the fly sheet

and insert the pole ends into these pockets.

You will need to flex the pole slightly to

make this happen. Attach the three Velcro

fly to pole fasteners located along the seam

that is in line with the fly pole. See image

10.

10. Now lift and invert the fly sheet and position the fly on to

the tent. Orient the vestibule end, has window, over the

large mesh vestibule. When all steps are completed it will

be draped loosely over the entire tent. There are now im-

portant fly to tent attachments required. These attach-

ments are important in the event of stormy

weather.

11. At each prebent shoulder you will find Vel-

cro as part of the pole sleeve. Line up the

corresponding Velcro on the underside of the fly sheet and

1.

2.

33.

4.

5.

6.

7.

8.

9.

10.

11.

ASSEMBLY INSTRUCTIONS for Bon Echo Tour 500/600

Component List:

• Tent body (inner tent) - Fly sheet with guy

lines attached

• Frame consists of 2 pre-bent main poles,

1 vestibule pole, 1 fly pole

• Steel stakes

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Eureka Bon Echo Tour 600 Tente. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Eureka. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Eureka Bon Echo Tour 600 Tente dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Eureka Tentes
Plus de modes d’emploi de Tentes

Foire aux questions sur Eureka Bon Echo Tour 600 Tente

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.