Mode d’emploi Yamaha A-670 Amplificateur

Mode d’emploi

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

i En

1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future

reference.

2 Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight, heat

sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum

clearances.

Top: 10 cm (4 in.)*, Rear: 10 cm (4 in.), Sides: 10 cm (4 in.)

*Except CD-NT670/CD-NT670D

3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an

environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit,

which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to

liquid dripping or splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation.

If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections are complete.

8 Do not operate this unit upside-down. It may overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is

dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held

responsible for any damage resulting from use of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from a wall

outlet or this unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service

is needed. The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power

plug from the wall outlet.

16 Be sure to refer to the “Troubleshooting” section for common operating errors before concluding that

this unit is faulty.

17 Before moving this unit, press A to set it to standby mode and disconnect the AC power plug from the

wall outlet.

18 Condensation will form when the surrounding temperature changes suddenly. Disconnect the power

cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may become warm. Turn the power off, then leave this

unit alone for cooling.

20 Install this unit near the AC outlet and where the AC power plug can be reached easily.

21 Excessive sound pressure from earphones and headphones can cause hearing loss.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT

TO RAIN OR MOISTURE.

This unit is not disconnected from the AC power source as long as it is connected to the wall

outlet, even if this unit itself is turned off by A. This state is called the standby mode. In this

state, this unit is designed to consume a very small quantity of power.

The user shall not reverse engineer, decompile, alter, translate or disassemble the software used in

this unit, whether in part or in whole. For corporate users, employees of the corporation itself as

well as its business partners shall observe the contractual bans stipulated within this clause. If the

stipulations of this clause and this contract cannot be observed, the user shall immediately

discontinue using the software.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Yamaha A-670 Amplificateur. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Yamaha. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Yamaha A-670 Amplificateur dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Yamaha Amplificateurs
Plus de modes d’emploi de Amplificateurs

Foire aux questions sur Yamaha A-670 Amplificateur

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Yamaha AX-496 Amplificateur

Mode d’emploi

Yamaha A-S700 Amplificateur

Mode d’emploi

Yamaha A-S1000 Amplificateur

Mode d’emploi

Yamaha A-S3000 Amplificateur

Mode d’emploi

Yamaha A-S500 Amplificateur

Mode d’emploi

Yamaha AX-397 Amplificateur

Mode d’emploi

Yamaha A-S201 Amplificateur

Mode d’emploi

Yamaha AX-497 Amplificateur

Catégories associées