Mode d’emploi Arcam BDP300 Lecteur de blu-ray

Mode d’emploi

E-4

installation

Arcam’s BDP300 provides class-leading sound quality from Blu-ray

Discs, DVD-Video discs and compact discs.

e BDP300 has a state-of-the-art Delta-Sigma DAC (Digital-to-

Analogue Converter) which provides audiophile sound quality for video

and audio discs.

e BDP300 is supplied with the CR104 ‘universal’ remote control, which

is simple to use and can control up to eight audio devices – such as an

amplifer, television or Personal Video Recorder.

e high performance BDP300 Blu-ray Disc player is designed to truly

bring your movies and music to life.

Placing the unit

< Place the BD player on a level, rm surface,

avoiding direct sunlight and sources of heat or

damp.

< Do not place the BD player on top of an amplier

or other source of heat.

< Do not place the BD player in an enclosed space

such as a bookcase or closed cabinet unless there

is good provision for ventilation. e BD player

is designed to run warm during normal operation.

< Do not place any other component or item on

top of the BD player as this may obstruct airow

around the unit, causing the BD player to run hot.

< Make sure the remote-control receiver (next to

the display on the front panel) is unobstructed, or

remote control will be impaired.

< Do not place your record deck on top of this

unit. Record decks are very sensitive to the noise

generated by mains power supplies which will be

heard as a background ‘hum’ if the record deck is

too close.

Power

e BD player is supplied with a moulded mains plug

already tted to the lead. Check that the plug supplied

ts your supply – should you require a new mains lead,

please contact your Arcam dealer.

If your mains supply voltage or mains plug is dierent,

please contact your Arcam dealer immediately

Push the IEC plug end of the power cable into the

socket on the back of the BD player, making sure that it

is pushed in rmly. Plug the other end of the cable into

your mains socket and, if necessary, switch the socket

on.

The remote control and trigger

inputs

e REMOTE IN input can be used to pass RC5 codes to

the BDP300 if it is installed in a position, or a system,

where infrared cannot be used. If this is required, please

contact your dealer for further information.

e TRIGGER IN input can be used to switch the BDP300

in and out of standby. Connecting the trigger output of

your Arcam amplier (or other compatible device), will

cause the BDP300 to come out of standby automatically

when the amplier is switched on, returning to standby

when the amplier is switched o. Please see your

amplier handbook for further information.

In normal use there is no need to make any connections

to these inputs.

e RS232 input is for optional connection to a home

automation system or a computer. Various third-party

systems are available providing sophisticated control

over all your entertainment devices using touch screens

etc. Contact your dealer or installer for further details.

e technical details of the remote control protocol

are available from Arcam on request (email support@

arcam.co.uk).

Interconnect cables

We recommend the use of high-quality screened cables

that are designed for the particular application. Other

cables will have dierent impedance characteristics

that will degrade the performance of your system (for

example, do not use cabling intended for video use to

carry audio signals). All cables should be kept as short as

is practically possible.

It is good practice when connecting your equipment to

make sure that the mains power-supply cabling is kept

as far away as possible from your audio cables. Failure to

do so may result in unwanted noise in the audio signals.

NOTE

e remote control input requires a mono 3.5mm

jack, with the tip active and the sleeve grounded.

e remote control signals must be in modulated

RC5 format (at 36kHz), with a voltage level of

between 5V and 12V.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Arcam BDP300 Lecteur de blu-ray. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Arcam. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Arcam BDP300 Lecteur de blu-ray dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Arcam Lecteurs de blu-ray
Plus de modes d’emploi de Lecteurs de blu-ray

Foire aux questions sur Arcam BDP300 Lecteur de blu-ray

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Arcam UDP411 Lecteur de blu-ray

Mode d’emploi

Arcam BDP100 Lecteur de blu-ray

Mode d’emploi

Philips BDP7500S2 Lecteur de blu-ray

Mode d’emploi

Philips PB9001 Lecteur de blu-ray

Mode d’emploi

Philips BDP3290B Lecteur de blu-ray

Mode d’emploi

LG HR550C Lecteur de blu-ray

Mode d’emploi

Philips BDP3250 Lecteur de blu-ray

Mode d’emploi

Philips BDP2900 Lecteur de blu-ray

Catégories associées