Mode d’emploi Basetech 1490514 Commutateur HDMI

Mode d’emploi

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represents the technical status at the time of printing.

Copyright 2016 by Conrad Electronic SE. *1490514_V1_0916_02_IPL_m_en

Operation

When choosing a cable, please note that there are different types of HDMI

cables. In case of doubt, consult a professional for further information.

Use a high-speed HDMI cable to play back a 3D signal with a bandwidth of

more than 225 MHz or a resolution of 4K x 2K.

The product supports HDCP encryption and 3D playback.

If you connect two televisions, which each have a different max. resolution,

then the lower resolution is automatically displayed on both televisions.

For example: A television with 4K-resolution is connected to one output.

A television with 720p-resolution is connected to the other output. The

picture is displayed with a resolution of 720p on both televisions.

• Make sure all devices to be connected are switched off.

• Connect a playback device (e.g. BluRay player, DVD player, game console) with

the xed installed HDMI cable.

• Connect up to two output devices (i.e. television, projector, monitor) to HDMI

OUTPUT 1 and HDMI OUTPUT 2 using suitable HDMI cables.

• Turn on all connected devices.

Normally the product is supplied with power from the HDMI input source,

so that it is not necessary to use the enclosed USB power cable.

If the HDMI input source does not supply sufcient power, connect the

low-voltage round plug of the USB power cable with the power connection.

Then connect the USB plug of the USB power cable with an unused USB

port of a computer or a suitable USB power adapter (output 5 V/DC,

500 mA).

LED signals

LED Signal

OUTPUT 2 Lights up blue when

• the product is supplied with power,

• an output device is connected and

• the HDMI signal is displayed on the output device.

OUTPUT 1

INPUT Lights up blue when

• the product is supplied with power,

• a playback device is connected and

• the playback device is turned on.

Cleaning and care

• Each time before cleaning, disconnect the product from all connected devices.

• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other

chemical solutions since these can penetrate the housing or impair functionality.

• There are no components located inside the product you need to maintain. Never

open/dismantle the product.

• Clean the product with a dry, bre-free cloth.

• You can easily remove dust using a long-haired, soft and clean brush.

Disposal

Electronic devices are recyclable waste and must not be disposed of in the

household waste. At the end of its service life, dispose of the product in

accordance with applicable regulatory guidelines.

You thus fulll your statutory obligations and contribute to the protection of

the environment.

Technical data

Operating voltage ................... 5 V/DC

Power consumption ............... max. 500 mA

Input........................................ 1 x HDMI

Output ..................................... 2 x HDMI

Frequency range .................... 25 - 300 MHz

Supported resolutions ............. 480i~1080p@50/60 Hz

1080p@24/50/60 Hz

VGA~UXGA, 4K 2K@30 Hz

3D support .............................. up to 1080p, 60 Hz

Supported standards .............. HDCP 1.3

Standard Audio

DSD Audio

HD (HBR) Audio

Video bandwidth ..................... 340 MHz / 10.2 Gbps

Operating conditions ............... 0 to +40 ºC, 20 – 90 % RH (non condensing)

Storage conditions .................. -20 to +60 ºC, 20 – 90 % RH (non condensing)

Dimensions (W x H x D) ......... 80 x 13 x 57 mm

Weight .................................... 84 g

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Basetech 1490514 Commutateur HDMI. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Basetech. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Basetech 1490514 Commutateur HDMI dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Basetech Commutateurs HDMI
Plus de modes d’emploi de Commutateurs HDMI

Foire aux questions sur Basetech 1490514 Commutateur HDMI

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Basetech 1490513 Commutateur HDMI

Mode d’emploi

Marmitek Connect 410 Commutateur HDMI

Mode d’emploi

Nedis VSWI3455BK Commutateur HDMI

Mode d’emploi

Lindy 38241 Commutateur HDMI

Mode d’emploi

Velleman VASH2 Commutateur HDMI

Mode d’emploi

Manhattan 207874 Commutateur HDMI

Mode d’emploi

Inakustik Premium Commutateur HDMI

Mode d’emploi

Philips SWV6813 Commutateur HDMI

Catégories associées