Mode d’emploi Black and Decker GT517 Taille-haies

Mode d’emploi

4

ENGLISH

 Never allow children to use the tool.

 Be aware of falling debris when cutting the higher sides of

a hedge.

Features

This tool includes some or all of the following features.

1. Trigger switch

2. Front handle switch

3. Front handle

4. Guard

5. Blade

6. Blade sheath

7. Cable restraint

This hedgetrimmer has the following features for your benefit:

 Ergonomically formed handles for comfortable cutting.

 Machined blades for improved cutting.

 Dual action blades for reduced vibration.

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged and that the blade sheath is fitted

over the blades.

Fitting the guard (fig. A)

 Locate the guard (4) into the grooves (8).

 Secure the guard using the two screws (9) supplied.

Warning! Never use the tool without the guard.

Connecting the tool to the mains (fig. B)

Unless the tool is fitted with a mains cable, you will need to

connect an extension cable to the power inlet.

 Connect the female socket of a suitable extension cable to

the power inlet of the tool.

 Loop the cable through the cable restraint (7) as shown to

prevent the extension cable from becoming detached

during use.

 Insert the mains plug into a mains outlet.

Warning! The extension cable must be suitable for outdoor

use. When using a cable reel, always unwind the cable

completely.

Use

Warning! Let the tool work at its own pace. Do not overload.

 Carefully guide the cable in order to avoid accidentally

cutting it. A good way to control the cable is by putting it

over your shoulder.

 For your safety, this tool is equipped with a double

switching system. This system prevents starting the tool

inadvertently and will only allow operation while holding

the tool with both hands.

Electrical safety

#

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

 This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

 If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Additional safety instructions for hedgetrimmers

Wear safety glasses or goggles when operating this

tool.

Wear gloves when operating this tool.

Wear ear protection when operating this tool.

Immediately disconnect the cable from the mains if it

is damaged or cut.

Do not expose the tool to rain or high humidity.

 Keep the cable away from the blades while using this tool.

 If you have not used a hedgetrimmer before, preferably

seek practical instruction by an experienced user in addition

to studying this manual.

 Never touch the blades while the tool is running.

 Never attempt to force the blades to come to a standstill.

 Do not put the tool down until the blades have come to a

complete standstill.

 Regularly check the blades for damage and wear. Do not

use the tool when the blades are worn or damaged.

 Take care to avoid hard objects (e.g. metal wire, railings)

when trimming. Should you accidentally hit any such object,

immediately switch the tool off and check for any damage.

 Should the tool start to vibrate abnormally, immediately

switch it off and check for any damage.

 If the tool stalls, immediately switch it off. Unplug the tool

before attempting to remove any obstructions.

 After use, place the blade sheath supplied over the blades.

Store the tool, making sure that the blade is not expose

d.

 Always ensure that all guards are fitted when using the tool.

Never attempt to use an incomplete tool or a tool with

unauthorised modifications.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Black and Decker GT517 Taille-haies. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Black and Decker. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Black and Decker GT517 Taille-haies dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Black and Decker Taille-haies
Plus de modes d’emploi de Taille-haies

Foire aux questions sur Black and Decker GT517 Taille-haies

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Black and Decker BEHTS401-QS Taille-haies

Mode d’emploi

Black and Decker GTC5455PCB Taille-haies

Mode d’emploi

Black and Decker GT41 Taille-haies

Mode d’emploi

Black and Decker GTC18504PC-QW Taille-haies

Mode d’emploi

Black and Decker GT7026 Taille-haies

Mode d’emploi

Black and Decker PH5551 Taille-haies

Mode d’emploi

Black and Decker GT650 Taille-haies

Mode d’emploi

Black and Decker GT251 Taille-haies

Catégories associées