Mode d’emploi Black and Decker GTC610L Taille-haies

Mode d’emploi

5

ENGLISH

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

5. Battery tool use and care

a. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when used with

another battery pack.

b. Use power tools only with specifically designated

battery packs. Use of any other battery packs may create

a risk of injury and fire.

c. When battery pack is not in use, keep it away from other

metal objects, like paper clips, coins, keys, nails,

screws, or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

d. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the

battery may cause irritation or burns.

6. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

Additional power tool safety warnings

@

Warning! Additional safety warnings for hedge

trimmers

 Keep all parts of the body away from the cutter blade.

Do not remove cut material or hold material to be cut

when blades are moving. Make sure the switch is off

when clearing jammed material. A moment of inattention

while operating the tool can result in serious personal injury.

 Carry the hedge trimmer by the handle with the cutter

blade stopped. When transporting or storing the

hedge trimmer always fit the cutting device cover.

Proper handling of the hedge trimmer will reduce possible

personal injury from the cutter blades.

 Keep cable away from cutting area. During operation

the cable can be hidden in shrubs and can be accidentally

cut the handle.

 This tool is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the tool

by a person responsible for their safety. Children should

be supervised to ensure that they do not play with the tool.

 The intended use is described in this instruction manual.

The use of any accessory or attachment or performance

of any operation with this tool other than those

recommended in this instruction manual can present a risk

of personal injury and/or damage to property.

 Do not carry the tool with your hands on the front handle,

switch or the trigger switch unless the battery has been

removed.

 If you have not used a hedge trimmer before, preferably

seek practical instruction by an experienced user in

addition to studying this manual.

 Never touch the blades while the tool is running.

 Never attempt to force the blades to come to a standstill.

 Do not put the tool down until the blades have come to a

complete standstill.

 Regularly check the blades for damage and wear.

Do not use the tool when the blades are damaged.

 Take care to avoid hard objects (e.g. metal wire, railings)

when trimming. Should you accidentally hit any such

object, immediately switch the tool off and check for any

damage.

 Should the tool start to vibrate abnormally, immediately

switch it off and check for any damage.

 If the tool stalls, immediately switch it off. Remove the

battery before attempting to remove any obstructions.

 After use, place the blade sheath supplied over the blades.

Store the tool, making sure that the blade is not exposed.

 Always ensure that all guards are fitted when using the

tool. Never attempt to use an incomplete tool or a tool with

unauthorised modifications.

 Never allow children to use the tool.

 Be aware of falling debris when cutting the higher slides of

a hedge.

 Always hold the tool with both hands and by the handles

provided.

Vibration

The declared vibration emission values stated in the technical

data and the declaration of conformity have been measured in

accordance with a standard test method provided by EN 786

and may be used for comparing one tool with another.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Black and Decker GTC610L Taille-haies. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Black and Decker. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Black and Decker GTC610L Taille-haies dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Black and Decker Taille-haies
Plus de modes d’emploi de Taille-haies

Foire aux questions sur Black and Decker GTC610L Taille-haies

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Black and Decker GTC610QW Taille-haies

Mode d’emploi

Black and Decker BCHTS36 Taille-haies

Mode d’emploi

Black and Decker GTC1445L Taille-haies

Mode d’emploi

Black and Decker GTC5455PC Taille-haies

Mode d’emploi

Black and Decker GTC800 Taille-haies

Mode d’emploi

Black and Decker GT535 Taille-haies

Mode d’emploi

Black and Decker GTC1845L20-QW Taille-haies

Mode d’emploi

Black and Decker GT7030 Taille-haies

Catégories associées