Mode d’emploi Candy CDI 4015 Lave-vaisselle

Mode d’emploi

15

Option buttons

IMPORTANT

All options MUST be turned on or off,

BEFORE pressing "START" button.

"ECO" button

The "ECO" button provides over 20% time

and energy savings by reducing the final

water heating and drying times during the

last rinse cycle.

This option is recommended for light soil

washes, and for when the dishes are not

required perfectly dry straight away.

If you want to get better drying, we advise

to leave the dishwasher door slightly ajar at

the end of the cycle, to allow for a natural

circulation of air inside the dishwasher.

"PLUS" button

The "PLUS" option always guarantees the

best results by more effectively dealing

with heavier soiling. By using this option,

the strength of the selected cycle will be

increased, adding one rinse and increasing

the temperature of the water in the washing

phase where foreseen.

This option is recommended for very dirty

dishes or when dirty dishes may not have

been pre-treated allowing the soiling to dry

up.

“1/2 FLEXI” button

To ensure that your dishwasher meets all

your requirements, this button allows you

to select:

1) Half Load Top Basket

By selecting this option dishes

are washed in the top basket

and cutlery in lower basket.

2) Half Load Lower Basket

By selecting this option dishes

are washed in the lower basket

only.

14

PROGRAM SELECTION

AND SPECIAL FUNCTIONS

(Use in conjunction with programme guide)

Program settings

■ Open the door and place dirty dishes

inside the appliance.

■ Press the "ON/OFF" button .

■ After pressing the "ON/OFF" button, the

symbol of the program for the factory set

is "recommended” (which is ideal for

full load daily use) or the symbol for the

"Auto’ Memory" program (see below) will

appear on the display.

IMPORTANT

The dishwasher has two very practical

functions:

- the "recommended" program

( ) for quick and sure selection;

- the "Auto’ Memory", function which

saves a program used at least 3

times consecutively so that if you

regularly use the same washing cycle

each time you do not have to

continually set the program thereby

saving time and effort.

■ To select an option, press the

corresponding button (the LED will turn on).

Option buttons must be pressed

BEFORE starting the program for

them to be accepted.

■ To set another programme, press the

"PROGRAMME SELECTION" button

("PR.").

■ When the required programme is shown

in the display, press the "START" button.

The length of the program will be shown on

the display alternating hours with minutes

[I.e.: 1 h (1 hour) / 25 (25 minutes)].

■ Close the door (after an audible signal

has sounded, if it has not been deactivated,

the programme will start automatically).

“AUTOMATIC” programs

The dishwasher is equipped with a dirt

sensor, able to analyse water murkiness

during all "AUTOMATIC" program phases

(see program list); thanks to this sensor the

washing cycle parameters are automatically

adapted to the real quantity of dirt on

dishes. Thus excellent washing results are

guaranteed while optimising water and

energy consumption.

Program interruption

Opening the door when a program is

running is not recommended especially

during the main washing and final hot rinse

phases. However, if the door is opened

while a program is running (for example,

to add dishes) the machine stops

automatically and the display will flash the

remaining time before the end of the cycle.

Close the door, without pressing any

buttons. The cycle will start from where it

left off (if it is necessary, the appliance

will make a short thermal anti-shock

programme before).

WARNING!

If you open the door during the

drying cycle, an audible audio signal

advises you that the drying cycle has

not yet completed.

Changing a running program

Proceed as follows to change or cancel a

running program:

■ Open the door.

■ Hold the "START" button down for at

least 5 seconds (the running program

will be cancelled).

■ At this point a new program can be set.

IMPORTANT

If, when the "START" button is held

down, "00" blinks on the display, it

means that there is water in the

appliance.

Close the door to allow the water to

be discharged and wait for the

audible signal, after which the new

programme can be set.

WARNING!

Before starting a new programme,

you should check that there is still

detergent in the dispenser.

If necessary, top up the dispenser.

If there is any break in the power supply

while the dishwasher is operating, a

special memory stores the selected

programme and, when the power is

restored, it continues where it left off (if

it is necessary, the appliance will make

a short thermal anti-shock programme

before).

Program end

A5 second buzzer will sound (if not muted)

3 times at 30 second intervals to signal that

the program has ended. Dishes can now

be removed and the dishwasher turned off

by pressing the "ON/OFF" button or dishes

can be loaded for a new cycle.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Candy CDI 4015 Lave-vaisselle. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Candy. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Candy CDI 4015 Lave-vaisselle dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Candy Lave-vaisselle
Plus de modes d’emploi de Lave-vaisselle

Foire aux questions sur Candy CDI 4015 Lave-vaisselle

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Candy CDPN 4S603PX Lave-vaisselle

Mode d’emploi

Candy CELDIN 2L360PB Lave-vaisselle

Mode d’emploi

Candy CDPN 4S603PW Lave-vaisselle

Mode d’emploi

Candy CF 3C7F0X Lave-vaisselle

Mode d’emploi

Candy CF 6C4F1X Lave-vaisselle

Mode d’emploi

Candy CDPH 2D1047S Lave-vaisselle

Mode d’emploi

Candy CS 3E6L0W Lave-vaisselle

Mode d’emploi

Candy CDPN 4S603PX/E Lave-vaisselle

Catégories associées