Mode d’emploi Desq 2022 Système d’alarme

Mode d’emploi

DESQ International:

Gildeweg 18 - 3771 NB – Barneveld

The Netherlands

Phone +31 (0)342-425350 - Fax +31 (0)342-425351

E-mail [email protected] - Internet www.desq.eu

Service Department:

NL: Phone +31 (0)342-425352.

SPAIN: Ofiactiva S.L. - Phone +34 935441884

ENG

INTRODUCTION

The DESQ entry alarm and glass vibration alarm 2022 provides protection of unwanted intruders in your

(home) office. It can provide valuable protection if used properly. However, this unit cannot guarantee

complete protection against burglary or robbery. Therefore, DESQ International will not be held responsible

for any loss or damage which could occur. In order to use this product correctly, read these instructions

carefully. Please keep instructions for future reference.

IMPORTANT SAFETY TIPS

1) Read all installation and operating instructions.

2) Avoid dropping or rough handling.

3) The alarm siren is very loud, never put the unit close to your ear. To test the alarm, direct the unit away

from you at arms length and activate.

SELECTING THE MOUNTING LOCATION

Important: before mounting and testing this unit, be sure to read the “important safety tips” section at the

beginning of this manual.

ENTRY ALARM

1) To apply the alarm system on the door frame, remove the film covering the warning sign in front of the

sensor. The film is covering and adhesive, which when pressed to a surface will adhere.

2) Attach the magnetic sensor to the door frame so that it will be no more than 6 mm from the magnet. Both

the alarm system and the magnet must have the magnetic sensor mounted on the left side of the alarm

unit. Be sure the arrow of the magnet lines up with the arrow on the alarm system.

GLASS VIBRATION ALARM

1) To apply the alarm system on any glass surface, remove the film covering the warning sign in front of

the sensor. The film is covering and adhesive, which when pressed to a glass surface will adhere to the

glass.

2) To remove the alarm system (if needed) use a blow dryer and warm the sticky backing attached to the

glass working the heat around the unit. While still warming the adhesive twist the unit until it disengages

from the glass. The unit should be reusable unless the unit has been removed multiple times and adhesive

has lost its cohesion.

OPERATION

The DESQ entry alarm and glass vibration alarm 2022

provides a powerful sirene (65 or 90 db). A slide

switch is located on the side of the unit to select the right position.

ALARM MODE

1) To arm the unit, slide the switch to the “65” or “90” db position. The unit will automatically arm itself.

2) When the opening of a protected door or excess force is applied to a window is detected, the siren will

sound for 60 seconds.

3) To disarm the unit, slide the switch to OFF position.

LOW BATTERY INDICATOR

The LED indicator light located on the front of the unit will light up when the battery becomes low. It will

stay on until the battery is replaced.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Desq 2022 Système d’alarme. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Desq. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Desq 2022 Système d’alarme dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Desq Systèmes d’alarme
Plus de modes d’emploi de Systèmes d’alarme