Mode d’emploi Dolmar PS-6400 H Tronçonneuse

Mode d’emploi

5

Additional safety precautions

The following additional safety precautions must be

observed by all users of chain saws:

1. Do not operate a chain saw when you are fati

-

gued.

2. Use safety footwear; snug-tting clothing; protec

-

tive gloves; and eye, hearing, and head protection

devices.

3. Use caution when handling fuel. Move the chain

saw at least 10 feet (3 m) from the fueling point

before starting the engine.

4. Do not allow other persons to be near the chain saw

when starting or cutting with the chain saw. Keep

bystanders and animals out of the work area.

5. Do not start cutting until you have a clear work

area, secure footing, and a planned retreat path

from the falling tree.

6. Keep all parts of your body away from the saw

chain when the engine is running.

7. Before you start the engine, make sure that the

saw chain is not contacting anything.

8. Carry the chain saw with the engine stopped, the

guide bar and saw chain to the rear, and the mufer

away from your body.

9. Do not operate a chain saw that is damaged,

is improperly adjusted, or is not completely and

securely assembled. Be sure that the saw chain

stops moving when the throttle control trigger is

released.

10. Shut off the engine before setting it down.

11. Use extreme caution when cutting small size brush

and saplings because slender material may catch

the saw chain and be whipped toward you or pull

you off balance.

12. When cutting a limb that is under tension be alert

for springback so that you will not be struck when

the tension on the wood bers is released.

13. Keep the handles dry, clean, and free of oil or fuel

mixture.

14. Operate the chain saw only in well-ventilated

areas.

15. Do not operate a chain saw in a tree unless you

have been specically trained to do so.

16. All chain saw service, other than the items listed

in the owner’s manual maintenance instructions,

should be performed by DOLMAR . (For example,

if improper tools are used to remove the ywheel

or if an improper tool is used to hold the ywheel

in order to remove the clutch structural damage to

the ywheel could occur and could subsequently

cause the ywheel to burst.)

17. When transporting your chain saw, use the chain

protection cover.

18. Low kickback bars and low kickback chains are

designed to reduce the risk of kickback injury. Ask

your DOLMAR dealer about these devices.

Safety precautions for chain saw operators

While operating the chain saw please observe the

following rules:

a) Contact of the guide bar nose with any object

should be avoided.

b) Tip contact may cause the guide bar to move

suddenly upward and backward, which may

cause serious or fatal injury.

c) Always operate the chain saw with both hands.

WARNING!

Read and follow all safety precautions in the owner’s

manual. Failure to follow instructions could result in

serious injury. It is recommended to lend the chain

saw only to people who are experienced in working

with chain saws. Always hand over the Owner’s

and Safety Manual.

WARNING!

This chain saw is capable of severe kickback that

could result in serious injury to the operator. Do

not operate this chain saw unless you have ex-

traordinary cutting needs and experience in and

special training for dealing with kickback. Chain

saws with signicantly reduced kickback potential

are available.

WARNING!

Kickback may occur when the nose or tip of the

guide bar touches an object, or when the wood

closes in and pinches the saw chain in the cut.

This contact may abruptly stop the saw chain and

in some cases may cause a lightning fast reverse

reaction, kicking the guide bar up and back towards

the user, or push the guide bar back towards the

operator. Kickback may cause you to lose control

of the saw.

As a chain saw user, you can take several steps to

reduce the risk of a kickback and potential injury.

A. With a basic understanding of kickback, you

can reduce or eliminate the element of sur-

prise. It is a sudden surprise that contributes

to accidents.

B. Keep a good rm grip on the saw with both

hands, your right hand on the rear grip and

your left hand on the tubular handle, when the

engine is running. Use a rm grip with thumbs

and ngers encircling the chain saw handles. A

rm grip can neutralize kickback and help you

maintain control of the saw. Don’t let go!

C. Make sure that the area in which you are cut

-

ting is free from obstructions. Do not let the

nose of the guide bar contact the log, branch,

or any other obstructions which could be hit

while you are operating the saw.

D. Do not overreach or cut above shoulder

height.

E. Follow manufacturer’s sharpening and main-

tenance instructions for the saw chain.

F. Only use replacement bars and chains speci-

ed by the manufacturer or the equivalent.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Dolmar PS-6400 H Tronçonneuse. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Dolmar. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Dolmar PS-6400 H Tronçonneuse dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Dolmar Tronçonneuses
Plus de modes d’emploi de Tronçonneuses

Foire aux questions sur Dolmar PS-6400 H Tronçonneuse

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Dolmar PS-6000i Tronçonneuse

Mode d’emploi

Dolmar 219 Tronçonneuse

Mode d’emploi

Dolmar PS-6000i H Tronçonneuse

Mode d’emploi

Dolmar PS-9010 Tronçonneuse

Mode d’emploi

Dolmar 260 Tronçonneuse

Mode d’emploi

Dolmar PS-35 TLC Tronçonneuse

Mode d’emploi

Dolmar ES-174 Tronçonneuse

Mode d’emploi

Dolmar AS-3731 Tronçonneuse

Catégories associées