Mode d’emploi FERM BGM1010 Meuleuse d'établi

Mode d’emploi

Ferm 31

Product: Ferm Belt sander/grinder

Type FBSM-150/50, art.nr. 350350

Ferm, Genemuiden, The Netherlands

Sound pressure level 76 dB(A)

In order to prevent overheating and possi-

ble damages to the engine, use the machine

intermittently, for periods of 30 minutes.

CAREFULLY READ THE INSTRUCTIONS

BEFORE YOU USE THE BELT SANDER/-

GRINDER!

1. GENERAL SAFETY RULES

Keep the work area clean.

- A cluttered work area may cause accidents.

- Make sure the work area is well lit.

Work environment.

Never leave tools in the rain. Do not use tools

in damp or wet places. Never use tools near in-

flammable liquids or gasses.

Prevent electrical shock.

Keep the power cord away from heat, oil and

sharp edges. Avoid skin contact with exposed

parts of the power cord or plug. Damaged parts

must be replaced immediately.

Keep children away.

Never allow children or spectators to touch the

tools, keep them at a safe distance from the

work area.

Store tools in a safe place.

Tools that are not used must be stored in a dry

and locked placed, out of the reach of children.

Do not force the tool.

The machine will do the job better and safer at

the rate for which it was intended. Damage cau-

sed by forcing the tool is not covered by the

warranty.

Use the right type of tool.

Do not use low-powered tools for heavy-duty

operations. Never use the machine other than

for its intended purpose.

Wear suitable clothing.

- Do not wear loose clothing or jewellery that

might get caught in moving parts;

- Never wear rings with protruding parts;

- Cover long hair;

Wear safety glasses, mouth and ear protection.

Wear personal protection while working.

Cable.

Never carry the tool by its cable and do not tug

at the cable to pull the plug from the socket.

Keep the cable away from heat, oil and sharp

edges.

Always clamp the work.

Always clamp the work against the bench.

Never

work on objects that are too small to hold.

Posture.

- Do not over each. Be sure of your footing and

balance at all times;

- Do not over reach on ladders or scaffold.

Maintain the tool with care.

- The tool works best and safest if it is kept clean.

- Observe the instructions for maintenance and

changing accessories. Keep the tool dry and free

from oil and grease.

Disconnect the machine.

Disconnect the machine when you do not use it,

before cleaning and when changing accessories

and tools.

Remove wrenches from the machine.

Before starting the machine, make sure to

remove wrenches and other tools.

Avoid unintentional starting.

Never carry the plugged-in machine with your

finger on the switch. Make sure the switch is off

when the machine is plugged in.

Extension cable for outdoor use.

When working outdoors use only extension cables

suitable for this purpose and marked as such.

When using machines with earth connection, use

an extension cable with earth connection.

Stay alert.

Watch what you are doing, use your common

sense, do not operate the tool when you cannot

concentrate on the job.

Check the machine for damage.

- Before starting the machine, check that all safety

devices operate properly;

- Make sure all moving parts are in good working

order. Check the machine for any broken or

!

GB

English

230V~ 240 W N

0

= 686 x 50 Ø 150 x Ø 12,7 mm

50Hz 2950/min mm 20 mm

2 Ferm

1'

AVAILABLE SPARE PARTS FOR FBSM-150/50

REF.NR. DESCRIPTION FERM NR.

1 PROTECTION GLASS 206401

4 SUPPORT LEFT 206152

5 RUBBER FOOT 206411

6 SWITCH 206451

9 FIXING KNOB 206157

11 SPRING 206158

15 ROTATION WHEEL 206156

16 DRIVING WHEEL 206155

18 PROTECTION GLASS HOLDER 206154

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos FERM BGM1010 Meuleuse d'établi. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter FERM. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre FERM BGM1010 Meuleuse d'établi dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour FERM Meuleuses d'établi
Plus de modes d’emploi de Meuleuses d'établi

Foire aux questions sur FERM BGM1010 Meuleuse d'établi

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.