Mode d’emploi FERM GRM1022 Nettoyeur haute pression

Mode d’emploi

5

EN

•

The machine shall be disconnected from its

power source by removing the plug from the

socket-outlet during cleaning or maintenance

and when replacing the machine to another

function.

• Observe a distance of at least 30cm when

using the jet to clean painted surfaces to avoid

damaging paintwork.

• Do not use the machine if a supply cord or

important parts of the machine are damaged,

e.g. safety devices, high pressure hoses,

trigger gun.

• If an extension cord is used, the plug and

socket must be of watertight construction.

• Inadequate extension cords can be dangerous.

If an extension cord is used, it shall be suitable

for outdoor use, and the connection has to be

kept dry and off the ground. It is recommended

that this is accomplished by means of a cord

reel which keeps the socket at least 60mm

above the ground.

• In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this

appliance must not be supplied through an

external switching device, such as a timer,

or connected to a circuit that is regularly

switched on and off by the utility.

• To ensure the machine safety, please only

use original spare parts (including nozzle)

from the manufacturer or approved by the

manufacturer. Do not use the machine before

you changed them if they are damaged.

• Be care of the danger of the kickback force on

the spray assembly when opening the trigger

gun and grasp the gun with hands firmly.

• To reduce the risk of injury, close supervision

is necessary when a machine is used near

children. High-pressure cleaner shall not be

used by children or untrained person.

• Know how to stop the machine and bleed

pressures quickly. Be thoroughly familiar with

the controls.

• Stay alert and watch what you are doing.

• Do not operate the machine when fatigued or

under the influence of alcohol or drugs.

• Keep operating area clear of all persons.

•

Do not overreach or stand on unstable support.

Keep good footing and balance at all times.

• Follow the maintenance instructions specified

in the manual.

• This machine must be grounded. If it has

malfunction or breakdown, grounding provides

a path of least resistance for electric current to

reduce the risk of electric shock. The plug must

be plugged into an appropriate outlet that is

properly installed and grounded in accordance

with all local codes and ordinances. The rating

voltage (V/Hz) of the machine has to be in

compliance with the local power supplying

voltage.

• Check with a qualified electrician or service

personnel if you are in doubt as to whether the

outlet is properly grounded. Do not modify the

plug provided with the machine. If it will not

fit the outlet, have a proper outlet installed by

a qualified electrician. Do not use any type of

adapter with this machine.

•

Use only 3-wire extension cords that have

3-prong grounding-type plugs and 3-pole

cord connectors that accept the plug from the

machine. Use only extension cords that are

intended for outdoor use and the socket must

be of watertight construction. These extension

cords are identified by a marking “Acceptable for

use with outdoor machines; store indoors while

not in use.” Use only extension cords having

an electrical rating not less than the rating of

the machine. Do not use damaged extension

cords. Examine extension cord before using and

replace if damaged. Inadequate extension cords

can be dangerous. Do not abuse extension cord

and do not yank on any cord to disconnect.

Keep cord away from heat and sharp edges.

Always disconnect the extension cord from the

receptacle before disconnecting the machine

from the extension cord.

• To reduce the risk of electrocution, don’t start

and run the machine in the rain or storm. Keep

all connections dry and off the ground. Do

not touch plug with wet hands. It is strictly

prohibited to let water leak into the machine.

•

When the machine is running, please maintain a

constant water supply. Without water circulation

will damage the sealing rings of the machine.

• It is necessary to turn on the spray lance within

one or two minutes after the machine has been

started. Otherwise, the temperature of the

circulating water within the machine will soon

rise to a critical point, which will cause damage

to the sealing rings inside the machine.

• Don’t start and run the machine in a place

excessively cold so as to prevent the machine

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos FERM GRM1022 Nettoyeur haute pression. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter FERM. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre FERM GRM1022 Nettoyeur haute pression dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour FERM Nettoyeurs haute pression
Plus de modes d’emploi de Nettoyeurs haute pression

Foire aux questions sur FERM GRM1022 Nettoyeur haute pression

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

FERM GRM1026 Nettoyeur haute pression

Mode d’emploi

FERM GRM1003 Nettoyeur haute pression

Mode d’emploi

FERM GRM1023 Nettoyeur haute pression

Mode d’emploi

FERM GRM1008 Nettoyeur haute pression

Mode d’emploi

FERM GRM1007 Nettoyeur haute pression

Mode d’emploi

FERM GRM1005 Nettoyeur haute pression

Mode d’emploi

FERM GRM1006 Nettoyeur haute pression

Mode d’emploi

FERM GRM1002 Nettoyeur haute pression

Catégories associées