Mode d’emploi Glem GTH64TCN Table de cuisson

Besoin d'un mode d’emploi pour votre Glem GTH64TCN Table de cuisson ? Ci-dessous, vous pouvez consulter et télécharger gratuitement le mode d’emploi PDF en français. Ce produit a actuellement 3 questions fréquemment posées, 0 commentaires et 0 votes. Si ce n'est pas le mode d’emploi que vous souhaitez, veuillez nous contacter.

Votre produit est défectueux et le mode d’emploi n’offre aucune solution ? Rendez-vous à un Repair Café pour obtenir des services de réparation gratuits.

Mode d’emploi

Loading…

8
This operation is necessary to avoid any
liquids penetrating the work top, as it is not
possible to guarantee that the top, the glass
and their connection are completely flat.
Lock the domestic appliance into place with
4 supporters, keeping in mind the width of
the surface (Fig.2).
If the lower part of the appliance after
installation, is accessible via the lower part
of the furniture, it is necessary to mount
a separating panel keeping in mind the
distances indicated (Fig.3) if the appliance
is being installed underneath an oven, this
is not necessary.
ELECTRICAL CONNECTIONS (Fig.5)
Before making the electrical connections,
check that:
- the ground wire is 2 cm longer than the
other cables;
- the system ratings meet the ratings
indicated on the identification plate fixed
on the lower part of the work top;
- the system is fitted with efficient ground
wires in accordance with the laws and
current standards.
Grounding is mandatory by law.
If the domestic appliance is not supplied
with a cable and/or suitable plug, use
material suitable for the absorption value
indicated on the identification plate and the
operating temperature. If wishing to make a
direct connection to the mains, an omnipolar
switch must be installed with a minimum
3 mm opening between the contacts and
appropriate for the load indicated on the plate
and in accordance with current standards
(the yellow/green ground conductor must
not be disconnected by a switch). When the
appliance has been installed, the omnipolar
switch must be easily reachable.
MAINTENANCE
Remove any residues of food and drops of
grease from the cooking surface by using
the special scraper supplied on request
(Fig.7) Clean the heated area as thoroughly
as possible using suitable products, and a
cloth/paper, then rinse with water and dry
with a clean cloth.
Using the special scraper (optional)
immediately remove any fragments of
aluminium and plastic material that have
unintentionally melted on the heated
cooking area, or residues of sugar or food
with a high sugar content (Fig.7). In this way,
any damage to the cook top surface can be
prevented. Under no circumstances should
abrasive sponges, or corrosive chemical
detergents, such as oven sprays or stain
removers, be used.
WARNING: STEAM CLEANERS MUST
NOT BE USED.
USE
Use the touch control system in the
corresponding position according to
individual cooking needs. Keep in mind that
the higher the number, the more heat is
produced.
TOUCH CONTROL (Fig.8)
A - ON/OFF key > switch the appliance on
and off
B- Plus key > increase power level of the
cooking zone
C- Minus key > reduce power level of the
cooking zone
D- Zone Selection key > select and
activate the desired cooking zone
SWITCHING ON THE HOB
Press the On-Off key to switch the
appliance on. The displays will turn on in the
«0 » position.
SWITCHING ON THE COOKING ZONES
Press the relative Zone Selection key
to select the desired cooking zone (see
fig.8D) and press the
«-» or «+»
key within
10 seconds to set the power level.
If within this time no cooking zone is selected,
the electronic device returns automatically
Télécharger mode d’emploi en Français (PDF, 2.67 MB)
(Tenez compte de l’environnement et imprimez ce manuel uniquement si c’est vraiment nécessaire)

Loading…

Évaluation

Dites-nous ce que vous pensez du Glem GTH64TCN Table de cuisson en laissant une note de produit. Vous voulez partager vos expériences avec ce produit ou poser une question ? Veuillez laisser un commentaire au bas de la page.
Etes-vous satisfait du Glem GTH64TCN Table de cuisson ?
Oui Non
Soyez le premier à évaluer ce produit
0 évaluations

Joignez-vous à la conversation sur ce produit

Ici, vous pouvez partager ce que vous pensez du Glem GTH64TCN Table de cuisson. Si vous avez une question, lisez d’abord attentivement le mode d’emploi. La demande d’un mode d’emploi peut être effectuée en utilisant notre formulaire de contact.

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Glem GTH64TCN Table de cuisson. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Glem. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Glem GTH64TCN Table de cuisson dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Marque Glem
Modèle GTH64TCN
Catégorie Tables de cuisson
Type de fichier PDF
Taille du fichier 2.67 MB

Tous les modes d’emploi pour Glem Tables de cuisson
Plus de modes d’emploi de Tables de cuisson

Foire aux questions sur Glem GTH64TCN Table de cuisson

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Quelles sont les casseroles qui peuvent être utilisées sur une table de cuisson à induction ? Vérifié

En général toutes les casseroles qui sont magnétiques peuvent être utilisées sur une table de cuisson à induction. Presque toutes les nouvelles casseroles sont adaptées à l'induction.

Cela a été utile (1380) En savoir plus

Ma plaque de cuisson est équipée d’une fiche secteur qui ne s’adapte pas à une prise de courant ordinaire, que dois-je faire ? Vérifié

De nombreuses tables de cuisson électriques (en céramique et à induction) ont une fiche différente. C’est parce que ces appareils nécessitent beaucoup d’énergie. Faites faire l’installation de l’appareil par un professionnel.

Cela a été utile (1308) En savoir plus

Pourquoi l’allumage de ma cuisinière émet-il un cliquetis ? Vérifié

Si la cuisinière a été nettoyée abondamment avec de l’eau, les boutons peuvent avoir été mouillés, déclenchant l’allumage. Laissez les boutons sécher. Si le problème persiste, vous devez contacter le fabricant.

Cela a été utile (1120) En savoir plus
Mode d’emploi Glem GTH64TCN Table de cuisson

Produits connexes

Catégories associées