Mode d’emploi Haier HAHG6BR4S2PX Table de cuisson

Mode d’emploi

For some models a conic link is furnished to

outfit for the installation in the countries where

this type of link is obligatory; in picture 8 it is

pointed out how to recognize the different

types of links (CY = cylindrical, CO = conic). In

every case the cylindrical part of the link has to

be connected to the hob.

When connecting the hob to the gas supply via

use offlexible hoses please ensure that the

maximum distance covered by the hose does

not exceed 2 metres.

The flexible tube shall be fitted in such a way that

it cannot come into contact with a moveable

part of the housing unit (e.g. a drawer) and does

not pass through any space where it may

become crushed/ kinked or damaged in any

way.

To prevent any potential damage to the hob

please carry out the installation following this

sequence (Figure 6*):

1. As illustrated, assemble parts in sequence:

A: 1/2 Male Adaptor Cylindirical

B: 1/2 Seal

C: 1/2 Female Gas Adaptor Conical-Cylindirical

or Cylindirical-Cylindirical

2. Tighten the joints with the spanner, remembering

to twist the pipes into position.

3. Attach fitting C to mains gas supply using rigid

copper pipe or flexible steel pipe.

IMPORTANT: carry out a final check for leaks on

the pipe connections using a soapy solution.

NEVER USE A FLAME. Also, make sure that the

flexible pipe cannot come into contact with a

moving part of the cabinet (eg.adrawer) and that

it is not situated where it could be damaged.

Warning: If gas can be smelt in the vicinity of this

appliance turn off the gas supply to the

appliance and call the engineer directly. Do not

search for a leak with a naked flame.

ADAPTING THE HOB TO DIFFERENT TYPE

OF GAS

To adapt the Hob for use with different types of

gas, carry out the following instructions:

• Remove the grids and burners

• Insert on hexagonal spanner (7 mm) into the

burner support (Figure 7*)

• Unscrew the injector and replace it with one

suitable for the gas to be used (see gas type

table)

REGULATING THE MINIMUM FLAME

After lighting the burners, turn the control knob

to the minimum setting and then remove the

knob (this can easily be removed by applying

gentle pressure).

Using a small «Terminal» type screwdriver the

regulating screw can be adjusted as in Figure 9*.

Turning the screw clockwise reduces the gas

flow, whilst turning it anticlockwise increases

the flow – Use this adjustment to obtain a flame

of approximately 3 to 4 mm in length and then

replace the control knob.

When the gas supply available is LPG - the

screw to set the idle flame must be turned

(clockwise) to the end stop.

When you have carried out the new gas

regulation, replace the old gas rating plate on your

appliance with one (supplied with hob) suitable for

the type of gas for which it has been regulated.

*See “Technical information” section at the end of this manual.

EN 9

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Haier HAHG6BR4S2PX Table de cuisson. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Haier. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Haier HAHG6BR4S2PX Table de cuisson dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Haier Tables de cuisson
Plus de modes d’emploi de Tables de cuisson

Foire aux questions sur Haier HAHG6BR4S2PX Table de cuisson

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Haier HAIPSJ64MC Table de cuisson

Mode d’emploi

Haier HAI64SCM Table de cuisson

Mode d’emploi

Haier HAHG6BR4XH Table de cuisson

Mode d’emploi

Haier HAHG6BF4XH Table de cuisson

Mode d’emploi

Haier HAMTCBP86IRCS Table de cuisson

Mode d’emploi

Haier HAMTP64MC Table de cuisson

Mode d’emploi

Haier HAIDSJ53MB1 Table de cuisson

Mode d’emploi

Haier HAIFB53IRCS Table de cuisson

Catégories associées