Mode d’emploi Hamilton Beach HBF600 Blender

Mode d’emploi

2

1. Read the Operation Manual before using blender.

Keep Operation Manual handy.

2. Before first use, wash container assembly in hot,

soapy water. Do NOT place in dishwasher.

3. Plug into a grounded outlet.

4. Do not remove ground.

5. Do not use an adapter.

6. Do not use an extension cord.

7. Disconnect power before cleaning or servicing.

8. To reduce risk of personal injury, unplug cord from

outlet when not in use and before putting on or taking

off parts.

9. Unplug the blender and inspect the power cord

insulation for cracks on a weekly basis. Refer to

“Technical Services” for repair or replacement.

10. To protect against electrical shock, do not immerse

cord, plug, or blender base in water or any other

liquid.

11. Do not spray the base with a high-pressure spray gun.

12. Extreme caution must be used when moving an

appliance containing hot oil or other hot liquids.

13. Do not use appliance for other than intended use.

14. Not intended for use by or near children.

15. This appliance is not intended for use by persons

with reduced physical, sensory, or mental capabilities,

or lack of experience and knowledge, unless they have

been given supervision or instruction concerning use

of the appliance by a person responsible for their

safety.

16. The use of accessory attachments not recommended

by the appliance manufacturer may cause injuries.

17. To reduce risk of personal injury and to prevent

damage to blender or container and cutter assembly,

DO NOT insert utensils into blender container while

operating blender.

18. Do not store any kitchen utensils in the container

because the blender would be damaged if

inadvertently turned on.

19. To prevent possibility of serious personal injury, keep

hands out of blender container while operating

blender.

20. Avoid contacting moving parts. Switch off the

appliance and disconnect from power supply before

changing accessories or approaching parts that move

in use.

21. Blades are sharp. Handle carefully.

22. If cutter assembly blades are loose, discontinue use

immediately and replace cutter assembly. Do not

attempt to repair or tighten cutter assembly.

23. Inspect container and cutter assembly daily. Do not

use broken, chipped, or cracked container. Check

cutter for wear, nicks, or broken blades. Do not use

broken, loose, or cracked cutting blades.

24. Do not use outdoors.

25. This appliance is intended for short periods of

operation, with a rated operating time of 3 minutes.

26. Do not leave blender unattended while it is operating.

27. To prevent damage to blender, container, or cutter

assembly, DO NOT move or shake blender while in

operation. If blending action stops during operation,

turn blender OFF (O), remove container from base,

remove container cover, and use a thin rubber spatula

to push mixture towards cutters.

28. When blending hot liquids, remove center piece of

two-piece lid. Hot liquids may push lid off jar during

blending. To prevent possible burns: Do not fill blender

jar beyond the 1 quart (1 liter) level. With the

protection of an oven mitt or thick towel, place one

hand on top of lid. Keep exposed skin away from lid.

Start blending at lowest speed.

29. Always operate blender with container cover in place.

30. This blender is designed with motor overload

protection. If the motor stops during operation due to

overheating, unplug the unit and allow it to cool down

for 15 minutes. Plug unit back after 15 minutes to

resume normal operation.

31. The normal function of this product may be disturbed

by strong electromagnetic interference. If this occurs,

simply reset the product and resume normal operation

by following the operation manual. If normal operation

cannot be resumed, place the product in a different

location.

32. Do not operate any appliance with a damaged cord or

plug or after the appliance malfunctions. If the supply

cord is damaged, it must be replaced by the

manufacturer, its service agent, or similarly qualified

persons in order to avoid a hazard. Refer to “Technical

Services” for contact information on examination,

repair, electrical or mechanical adjustment.

– SAVE THESE IN STRUC TIONS –

IMPORTANT SAFEGUARDS

WARNING – When using electrical appliances, basic safety precautions should be followed,

including the following:

Blender Safety

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Hamilton Beach HBF600 Blender. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Hamilton Beach. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Hamilton Beach HBF600 Blender dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Hamilton Beach Blenders
Plus de modes d’emploi de Blenders

Foire aux questions sur Hamilton Beach HBF600 Blender

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Hamilton Beach 51101 Single-Serve Blender

Mode d’emploi

Hamilton Beach 56222 Smoothie Smart Blender

Mode d’emploi

Hamilton Beach 58185 Blender

Mode d’emploi

Hamilton Beach 53620 Blender

Mode d’emploi

Hamilton Beach 58870 Blender

Mode d’emploi

Hamilton Beach 58175 Blender

Mode d’emploi

Hamilton Beach 51102 Single-Serve Blender

Mode d’emploi

Hamilton Beach 51126 Single-Serve Blender

Catégories associées