Mode d’emploi Honeywell HFD-010-2 QuietClean Purificateur d'air

Mode d’emploi

4 5

SET-UP (ALL MODELS)

• Select a firm, level and flat location. For best airflow, locate the unit at least 6 inches (15.2 cm) from

any wall or furniture.

• When operating, large volumes of air are drawn toward the air cleaner. Surrounding areas should be

cleaned and/or vacuumed frequently to prevent build-up of dust and other contaminants. This may also

help prolong the life of the filter. If the unit is placed on a light colored carpet, a small mat or rug should

be used underneath to prevent staining. This is especially important in homes with contamination from

smoking or fireplaces.

ENHANCED ODOR REDUCTION (HFD-014, HD010WHS, HD010LHS, HD010RHS ONLY)

The washable pre-filter came installed in your air purifier and removes larger particles from the air that

passes through the filter. You may use this washable pre-filter, or you have the choice to use the optional

Odor-Lock™ Pre-filter (in HFD-014, HD10WHS, HD010LHS, HD010RHS ONLY). In addition to capturing

larger particles, the Odor-Lock™ Pre-filter will also trap common household odors and gases. If you

choose to use the Odor-Lock™ Pre-filter, you must remove the installed washable pre-filter then insert the

Odor-Lock™ Pre-filter. (See “Installing The Odor-Lock

™

Pre-filters” on page 7).

NOTE: Please only use one pre-filter in your air cleaner at a time. You will need to choose whether you

want to use the permanent washable pre-filter or the replaceable Odor-Lock™ Pre-filter.

Both are included with your air cleaner at the time of purchase (in HFD-014, HD10WHS, HD010LHS,

HD010RHS ONLY).

OPERATION (HFD-015, HFD-110 and HD110)

• Press the Power ( ) button once. The unit will start at the

Medium Power level and remain on this setting until another

cleaning level is chosen (Fig. 6).

• Select a power level by pressing one of the three power level

buttons: High (

), Medium (

) or Low ( ) (Fig. 7). The indicator

light above the selected button will illuminate.

• Press the Power button again to turn off the air purifier.

Timer Operation

• Press the Timer (

) button if you would like your air cleaner to

run and then automatically shut-off after a certain amount of time

(choose from between 4, 8 or 12 hours). This is convenient if

you would like your air cleaner to run during the night but then

shut-off automatically in the morning (choose the 8 hour setting).

• The timer can be turned off by repeatedly pressing the Timer

(

) button until all of the timer indicator lights go out.

NOTE: Removing the ifD

®

Micro-filter assembly or turning the

unit off will cancel the Timer function.

OPERATION (HFD-010, HD010, HFD-013 and HFD-014 SERIES)

• Ensure the unit is in the OFF (O) position and is plugged into

a working electrical outlet.

• Rotate the control knob to the desired speed level: High (

) or

Low (

) (Fig. 5).

• The indicator light will illuminate when the power is on.

• Turn the control knob to the Off (O) position to turn off the

air purifier.

Fig. 5

Fig. 7

Fig. 6

Fig. 8

Check Filter Indicator - When it is time to check and clean the filters, an indicator light will illuminate

Fig. 9 (HFD-015, HFD-110 and HD110 Only). When this light comes on, you will need to clean the

primary ifD

®

filter and clean or replace the pre-filter. (See Filter Cleaning instructions on page 6). It is

recommended that you periodically check the filters.

To Reset Electronic Filter Check - After the ifD

®

filter and washable pre-filter have

been cleaned/replaced and re-installed in the unit, plug the unit into the power outlet

with the unit still in POWER OFF mode, press and hold the CHECK FILTERS RESET

button until the LED will no longer be illuminated.

The cleaning intervals are intended as guidelines only. Performance of any filter

media is dependent upon the concentration of contaminants going through the

system. High concentrations of contaminants such as dust, pet dander and smoke

particles will reduce the useful performance of the filter and they may need to be

cleaned more frequently.

FILTER CLEAN INDICATORS AND FILTER RESET (HFD-110, HFD-015 and HF110)

Fig. 9

Filter

Reset

Button

Indicator

Light

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Honeywell HFD-010-2 QuietClean Purificateur d'air. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Honeywell. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Honeywell HFD-010-2 QuietClean Purificateur d'air dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Honeywell Purificateurs d'air
Plus de modes d’emploi de Purificateurs d'air

Foire aux questions sur Honeywell HFD-010-2 QuietClean Purificateur d'air

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Honeywell HPA200COM Purificateur d'air

Mode d’emploi

Honeywell 50150-N Purificateur d'air

Mode d’emploi

Honeywell HPA080B Purificateur d'air

Mode d’emploi

Honeywell 50150 Purificateur d'air

Mode d’emploi

Honeywell 50200-N Purificateur d'air

Mode d’emploi

Honeywell HPA3300B PowerPlus Purificateur d'air

Mode d’emploi

Honeywell 50100 Purificateur d'air

Mode d’emploi

Honeywell HFD-120-Q Purificateur d'air

Catégories associées