Mode d’emploi Husqvarna 520iHT4 Taille-haies

Mode d’emploi

• the product has an accessory that is not from the

manufacturer or not approved by the manufacturer.

• the product is not repaired at an approved service

center or by an approved authority.

Safety

Safety definitions

Warnings, cautions and notes are used to point out

specially important parts of the manual.

WARNING: Used if there is a risk of

injury or death for the operator or bystanders

if the instructions in the manual are not

obeyed.

CAUTION: Used if there is a risk of

damage to the product, other materials or

the adjacent area if the instructions in the

manual are not obeyed.

Note: Used to give more information that is necessary

in a given situation.

General machine safety warnings

WARNING: Read all safety warnings

and all instructions. Failure to follow the

warnings and instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "machine" in the warnings refers to your

mains-operated (corded) machine or battery-operated

(cordless) machine.

Work area safety

• Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

• Do not operate machine in explosive atmospheres,

such as in the presence of flammable liquids, gases

or dust. Machines create sparks which may ignite

the dust or fumes.

• Keep children and bystanders away while operating

a machine. Distractions can cause you to lose

control.

Electrical safety

• Machine plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs

with earthed (grounded) machines. Unmodified plugs

and matching outlets will reduce risk of electric

shock.

• Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

•

Do not expose machines to rain or wet conditions.

Water entering a machine will increase the risk of

electric shock.

• Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the machine. Keep

cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk

of electric shock.

• When operating a machine outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of

electric shock.

• If operating a machine in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of a RCD reduces the risk of

electric shock.

Personal safety

• Stay alert, watch what you are doing and use

common sense when operating a machine. Do not

use a machine while you are tired or under the

influence of drugs, alcohol or medication. A moment

of inattention while operating machines may result in

serious personal injury.

• Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat or hearing

protection used for appropriate conditions will reduce

personal injuries.

• Prevent unintentional starting. Ensure the switch is

in the OFF-position before connecting to a power

source and/or battery pack, picking up or carrying

the tool. Carrying machines with your finger on the

switch or energising machines that have the switch

on invites accidents.

• Remove any adjusting key or wrench before turning

the machine on. A wrench or a key left attached to

a rotating part of the machine may result in personal

injury.

• Do not overreach. Keep proper footing and balance

at all times. This enables better control of the

machine in unexpected situations.

• Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away from

moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

• If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

• Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

1266 - 005 - 31.05.2024

5

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Husqvarna 520iHT4 Taille-haies. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Husqvarna. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Husqvarna 520iHT4 Taille-haies dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Husqvarna Taille-haies
Plus de modes d’emploi de Taille-haies

Foire aux questions sur Husqvarna 520iHT4 Taille-haies

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Husqvarna 522HSR75X Taille-haies

Mode d’emploi

Husqvarna 123HD60 Taille-haies

Mode d’emploi

Husqvarna 580HD56EL Taille-haies

Mode d’emploi

Husqvarna 522HDR60X Taille-haies

Mode d’emploi

Husqvarna 325HD75X-series Taille-haies

Mode d’emploi

Husqvarna 327HDA65X-series Taille-haies

Mode d’emploi

Husqvarna 325HD60X-series Taille-haies

Mode d’emploi

Husqvarna 327HE3X-series Taille-haies

Catégories associées