Mode d’emploi Husqvarna 522HS75X Taille-haies

Mode d’emploi

loaded stop switch and can be started by low speed

and force on the starter handle, even small children

under some circumstances can produce the force

necessary to start the product. This can mean a risk

of serious personal injury. Therefore remove the

spark plug cap when the product is not under close

supervision.

• Store the product out of reach of children.

• Never use the product if you are tired, if you have

drunk alcohol, or if you are taking medication that

could affect your vision, your judgement or your

coordination.

• Never use a product that is faulty. Carry out the

checks, maintenance and service instructions

described in this manual. Some maintenance and

service measures must be carried out by trained and

qualified specialists. Refer to instructions under the

heading Maintenance.

• Never use a product that has been modified in any

way from its original specification.

Safety instructions for operation

WARNING: Read the warning instructions

that follow before you use the product.

• Never use the product in extreme weather conditions

such as severe cold, very hot and/or humid climates.

• Faulty blades can increase the risk of accidents.

• Ensure that no people or animals comes closer than

15 m / 50 ft while you work.

• Observe your surroundings and make sure that there

is no risk of people or animals coming into contact

with the cutting equipment.

• Inspect the working area. Remove any objects that

could be thrown out.

• Always ensure you have a safe and stable working

position.

• Never leave the product unsupervised with the motor

running.

• Make sure that your hands and feet do not come

near the cutting unit when the engine is running.

• If anything jams in the blades while you are working,

switch off the engine and wait until it has stopped

completely before cleaning the blades. Disconnect

the spark plug cap from the spark plug.

• When the engine is switched off, keep your hands

and feet away from the cutting unit until it has

stopped completely.

• Watch out for stumps of branches that can be thrown

out during cutting.

• Listen out for warning signals or shouts when you

are wearing hearing protection. Always remove your

hearing protection as soon as the engine stops.

• Never work from a ladder, stool or any other raised

position that is not fully secured.

• Always use both hands to hold the product. Hold the

product in front of your body.

• If any foreign object is hit or if vibrations occur stop

the product immediately. Disconnect the spark plug

cap from the spark plug. Check that the product is

not damaged. Repair any damage.

• Ensure that the spark plug cap and ignition lead are

undamaged to avoid the risk of electric shock.

• Check that all nuts and screws are tight.

• Make sure the gearbox is lubricated correctly. Refer

to

To lubricate the gear housing on page 12

.

• The gearbox gets hot when the product has been in

use. To avoid burning yourself do not touch the

gearbox.

• All covers and guards must be fitted before starting.

• If the blades get stuck, they can be loosened by

sticking the combination wrench into the gearbox.

Stick the combination wrench into the gearing and

turn it back and forth. Refer to

To examine the

blades on page 12

.

• The transport guard should always be fitted to the

cutting unit when the product is not in use.

Personal protective equipment

WARNING: Read the warning instructions

that follow before you use the product.

• Always use approved personal protective equipment

when you use the product. Personal protective

equipment cannot fully prevent injury but it

decreases the degree of injury if an accident does

occur. Let your dealer help you select the right

equipment.

• Use approved hearing protection that provides

adequate noise reduction. Long-term exposure to

noise can result in permanent hearing impairment.

• Use approved eye protection. If you use a visor, you

must also use approved protective goggles.

Approved protective goggles must comply with the

ANSI Z87.1 standard in the USAs or EN 166 in EU

countries.

• Use gloves when necessary, for example when you

attach, examine or clean the cutting equipment.

4

905 - 001 - 05.02.2020

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Husqvarna 522HS75X Taille-haies. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Husqvarna. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Husqvarna 522HS75X Taille-haies dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Husqvarna Taille-haies
Plus de modes d’emploi de Taille-haies

Foire aux questions sur Husqvarna 522HS75X Taille-haies

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Husqvarna 327HE4X-series Taille-haies

Mode d’emploi

Husqvarna 115iHD45 Taille-haies

Mode d’emploi

Husqvarna 522HSR75X Taille-haies

Mode d’emploi

Husqvarna 122HD60 Taille-haies

Mode d’emploi

Husqvarna 600HD60EL Taille-haies

Mode d’emploi

Husqvarna 115iHD55 Taille-haies

Mode d’emploi

Husqvarna 522HDR75X Taille-haies

Mode d’emploi

Husqvarna 580HD56EL Taille-haies

Catégories associées