Mode d’emploi Krups XP444C10 Virtuoso Machine à expresso

Mode d’emploi

32

ENGLISH

MAKING ESPRESSO

IMPORTANT!

If the espresso function is used for the rst time, the appliance must be cleaned as

described in the “FIRST USE” paragraph.

IMPORTANT! To prevent splashes of hot water, check that the lter holder has been

tightened until it stops before preparing the coffee. Do not remove the lter holder

while the water is owing, as the appliance is still under pressure.

With ground coffee

To prepare your coffee, please refer to the rst 4 steps in the FIRST USE section and then follow the

instructions below:

The machine is in coffee brewing mode.

5. Add the ground coffee to the 1 cup or 2 cups lter (F1, F2) using the measuring spoon (L, 1 spoon

= 1 measure = +/- 7g of ground coffee = 1 espresso) (15, 16), then pack it down (rmly but not

too solid) using the tamper (17). Do not overll the lter. Clean off any excess coffee from around

the lter holder (18).

6. Slot the lter holder into place then turn it to the right until it stops (20).

7. Place a cup or two cups under the lter holder.

8. Press button

or button (21) or (9), according to the number of cups you want to make (15).

The selected button will ash and the appliance will start (22). When the machine has nished, the

buttons

will stay lit.

9. Unlock the lter holder by turning it to the left (23) and remove it from the appliance.

10. Use the lter holding hook to empty the lter. (24) Remove the lter from the lter holder.

11. Wash the lter and lter holder under running water to remove the rest of the coffee (25).

With Pods (E.S.E.)

You can use E.S.E. pods to make your espresso. They can be recognised by the logo

opposite.

1 E.S.E. pod = 1 cup of espresso (19)

1. Insert the lter for coffee pods (F3) into the lter holder.

2. Place the pod as centrally as possible in the lter holder. Follow the instructions on the packaging

of the coffee pods for correct placement of the pod in the lter holder. Pods (E.S.E.) are designed

to make one cup of coffee. Using two pods on top of each other is not recommended.

3. Repeat the steps in the “With ground coffee” section, ignoring step 5.

4. Press button (C) (5) on control panel (D). button light switches on, and buttons

lights ash white (6). The machine is pre-heating.

5. Place a lter (F2) (7) without coffee into the lter holder. Slot the lter holder into place and turn it

to the right until it stops (8).

6. Place two cups under the lter holder.

7. When the temperature reaches pre-set value,

buttons white light will stay on. The machine

is in coffee brewing mode. Press

button (9), button ashes white. The machine starts to pour

the water (10). When it is nished, buttons

white light stay on.

8. Press button

(11). Buttons white light off, button orange light stay on, the machine

is pre-heating.

9. Place the steam nozzle (H) into a container lled with water (12).

10. Turn the knob (M) from preheat (M1) to steam position (M2) (13), button white light ashes,

the machine starts to make steam. Let the water heat for 20 seconds, then turn the knob back to

preheat position (M1) (14).

Note: If you want to brew a coffee now, please refer to the GOOD TO KNOW – PRACTICE AFTER

USING STEAM section to know how to proceed.

You can personalize the coffee volume as you wish from 15 to 65 ml for 1 cup, and from 30 to 130 ml

for 2 cups.

Note : Default volume is 30 ml - 1 cup / 60 ml - 2 cups

1. The machine is in coffee brewing mode.

2. Press

or for 3 seconds. Selected espresso button orange light ashes.

3. Release the button and start set coffee volume.

4. Press the button as soon as the desired volume is reached.

5. Both

buttons orange lights ash 3 times to conrm the new setting.

6. The machine goes back to coffee brewing mode.

1. The machine is in steam pre-heat status:

button orange light stay on

2. Press

for 3 seconds. The buttons orange light ashes once.

3. Water pump works once.

4. Default coffee volumes are now recovered.

5. The machine goes back to steam pre-heat status.

You can change the automatic shutdown time of the machine to 5, 15 or 30 minutes. The default setting

is 30 minutes. To change it, please follow these instructions:

1. The machine is in coffee brewing mode

2. Press and hold the

and buttons simultaneously for 3 seconds

3. The

and button lights will ash orange:

• 1 time for a time set at 5 min

• 2 times for a time set at 15 min

• 3 times for a time set at 30 min

4. To change the current setting, press the

button when the and buttons are not ashing.

Repeat the operation until the number of orange ashes corresponds to the desired duration.

5. Wait until the

and buttons turn white again. Your new setting is saved.

PERSONALIZATION OF THE COFFEE VOLUME

RECOVER DEFAULT COFFEE VOLUME

PERSONALIZATION OF AUTOMATIC SHUT DOWN TIME

Making Cappuccino

1. Make espresso as described above using big enough cups. You can remove the drip tray and

place the tall cup on the stand if required.

2. Press button

(26). Buttons white light off, button orange light stay on, the machine

is in steam pre-heating mode.

3. Fill a container with approximately 60 to 100 ml of cold milk.

Note :

• When choosing the size of the milk container, keep in mind that the milk volume will increase by

two to three times.

• In order to obtain good quality milk foam, we recommend that you use fresh, cold milk. Pasteurised

or UHT milk usually gives the best results.

Note: For a better result, turn on the steam nozzle a few seconds in a container before using it in the

milk. It will remove the water it may contain.

STEAM FUNCTION

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Krups XP444C10 Virtuoso Machine à expresso. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Krups. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Krups XP444C10 Virtuoso Machine à expresso dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Krups Machines à expresso
Plus de modes d’emploi de Machines à expresso

Foire aux questions sur Krups XP444C10 Virtuoso Machine à expresso

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Krups XP441810 Virtuoso Essential Machine à expresso

Mode d’emploi

Krups EA875U10 Intuition Preference+ Machine à expresso

Mode d’emploi

Krups XN910C.20 Nespresso Vertuo Next Machine à expresso

Mode d’emploi

Krups XN741540 Nespresso Citiz Machine à expresso

Mode d’emploi

Krups KP160T31 Nescafe Dolce Gusto Genio 2 Machine à expresso

Mode d’emploi

Krups YY2910FD Nespresso Essenza Mini Machine à expresso

Mode d’emploi

Krups XN306T10S Nespresso Pixie Machine à expresso

Mode d’emploi

Krups XN741B10 Nespresso Citiz Machine à expresso

Catégories associées