Mode d’emploi Makita 2012NB Rabot

Mode d’emploi

3

function - check for alignment of moving parts,

binding of moving parts, breakage of parts,

mounting, and any other conditions that may

affect its operation. A guard or other part that is

damaged should be properly repaired or

replaced.

20. DIRECTION OF FEED. Feed work into a blade or

cutter against the direction of rotation of the

blade or cutter only.

21. NEVER LEAVE TOOL RUNNING UNATTENDED.

TURN POWER OFF. Don’t leave tool until it

comes to a complete stop.

22. REPLACEMENT PARTS. When servicing use

only identical replacement parts.

23. POLARIZED PLUGS. To reduce the risk of elec-

tric shock, this equipment has a polarized plug

(one blade is wider than the other). This plug will

fit in a polarized outlet only one way. If the plug

does not fit fully in the outlet, reverse the plug. If

it still does not fit, contact a qualified electrician

to install the proper outlet. Do not change the

plug in any way.

VOLTAGE WARNING: Before connecting the tool to a

power source (receptacle, outlet, etc.) be sure the volt-

age supplied is the same as that specified on the name-

plate of the tool. A power source with voltage greater

than that specified for the tool can result in SERIOUS

INJURY to the user – as well as damage to the tool. If in

doubt, DO NOT PLUG IN THE TOOL. Using a power

source with voltage less than the nameplate rating is

harmful to the motor.

USE PROPER EXTENSION CORD: Make sure your

extension cord is in good condition. When using an

extension cord, be sure to use one heavy enough to

carry the current your product will draw. An undersized

cord will cause a drop in line voltage resulting in loss of

power and overheating. Table 1 shows the correct size to

use depending on cord length and nameplate ampere

rating. If in doubt, use the next heavier gage. The smaller

the gage number, the heavier the cord.

ADDITIONAL SAFETY RULES

USB077-1

DO NOT let comfort or familiarity with

product (gained from repeated use)

replace strict adherence to planer safety

rules. If you use this tool unsafely or

incorrectly, you can suffer serious per-

sonal injury.

1. Wear eye protection.

2. Make sure that all covers are installed in place

before operation.

3. Handle the blades very carefully.

4. Check the blades carefully for cracks or damage

before operation. Replace cracked or damaged

blades immediately.

5. Tighten the planer blade installation bolts

securely.

6. Remove nails and clean the workpiece before

cutting. Nail, sand or foreign matter can cause

blade damage.

7. Do not wear gloves during operation.

8. Do not remove chips from the chip chute when

the motor is running. Clean out chips after the

blades come to a complete stop. Always use a

stick etc. when cleaning them out.

9. Do not leave the tool running.

10. Do not abuse cord. Never yank cord to discon-

nect it from receptacle. Keep cord away from

heat, oil water and sharp edges.

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety

rules stated in this instruction manual

may cause serious personal injury.

Table 1: Minimum gage for cord

Ampere Rating

Volts Total length of cord in feet

120 V 25 ft. 50 ft. 100 ft. 150 ft.

More Than Not More Than AWG

0 6 18 16 16 14

18 16 14 12610

10 12 16 16 14 12

12 16 14 12

Not Recommended

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Makita 2012NB Rabot. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Makita. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Makita 2012NB Rabot dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Makita Rabots
Plus de modes d’emploi de Rabots

Foire aux questions sur Makita 2012NB Rabot

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Makita KP0810C Rabot

Mode d’emploi

Makita BKP180 Rabot

Mode d’emploi

Makita KP0800 Rabot

Mode d’emploi

Makita BKP140 Rabot

Mode d’emploi

Makita 1901 Rabot

Mode d’emploi

Makita 1902 Rabot

Mode d’emploi

Makita 1806B Rabot

Mode d’emploi

Makita KP312S Rabot

Catégories associées