Mode d’emploi Makita 6821 Visseuse

Mode d’emploi

ENGLISH

Explanation of general view

1 Locator

2 Locking sleeve

3 Bit

4 Magnetic bit holder

5 Switch trigger

6 Lock button

7 Reversing switch lever

8 Clockwise rotation

9 Counterclockwise rotation

SPECIFICATIONS

Model 6821

Capacities

Self drilling screw .......................................... 6 mm

Drywall screw ................................................ 5 mm

Bit shank size ............................................. 1/4’’ Hex

No load speed (RPM) ................................ 0 – 4,000

Overall length ............................................... 273 mm

Net weight ....................................................... 1.3 kg

•

Due to the continuing program of research and

development, the specifications herein are subject

to change without prior notice.

•

Note: Specifications may differ from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

1. Always be sure you have a firm footing.

Be sure no one is below when using the

machine in high locations.

2. Hold the machine firmly.

3. Keep hands away from rotating parts.

4. When driving into walls, floors or wherever

‘‘live’’electrical wires may be encountered. DO

NOT TOUCH ANY METAL PARTS OF THE

MACHINE!

Hold the machine by the insulated grasping

surfaces to prevent electric shock if you drive

into a ‘‘live’’ wire.

5. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely

hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Removing or installing the bit (Fig.1&2)

Important:

Always be sure that the machine is switched off and

unplugged before removing or installing the bit.

Pull the locator out of the locking sleeve while turning

the locator slightly. Then grasp the bit with a pair of

pliers and pull the bit out of the magnetic bit holder.

Sometimes, it helps to wiggle the bit with the plires as

you pull.

To install the bit, push the bit firmly into the magnetic

bit holder. Then install the locator by pushing it firmly

onto the locking sleeve while turning the locator

slightly.

Depth adjustment (Fig. 3,4&5)

Adjust the locator by turning the locking sleeve. One

full turn of the locking sleeve moves the locator 2 mm.

Initially, adjust the locator so that the tip of the locator

is flush with the base of the screw head. Drive a trial

screw into your material or a piece of duplicate

material. If the depth is not suitable for the screw,

continue adjusting until the proper depth setting is

obtained.

Switch action (Fig. 6)

CAUTION:

Before plugging in the machine, always check to see

that the switch trigger actuates properly and returns to

the ‘‘OFF’’ position when released.

To start the machine, simply pull the trigger. Machine

speed is increased by increasing pressure on the

trigger. Release the trigger to stop.

For continuous operation, pull the trigger and then

push in the lock button. To stop the machine from the

locked position, pull the trigger fully, then release it.

Reversing switch action (Fig. 7)

This machine has a reversing switch to change the

direction of rotation. Move the reversing switch lever

to the ‘‘

’’ position for clockwise rotation or the

‘‘

’’ position for counterclockwise rotation.

CAUTION:

•

Always check the direction of rotation before opra-

tion.

•

Use the reversing switch only after the machine

comes to a complete stop. Charging the direction of

rotation before the machine stops may damage the

machine.

6821(Eng) (’96. 10. 7)

3

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Makita 6821 Visseuse. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Makita. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Makita 6821 Visseuse dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Makita Visseuses
Plus de modes d’emploi de Visseuses

Foire aux questions sur Makita 6821 Visseuse

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Makita DFT087F Visseuse

Mode d’emploi

Makita DFL302F Visseuse

Mode d’emploi

Makita FS4300X Visseuse

Mode d’emploi

Makita DFL125F Visseuse

Mode d’emploi

Makita DFL651F Visseuse

Mode d’emploi

Makita BFL402F Visseuse

Mode d’emploi

Makita DFT060T Visseuse

Mode d’emploi

Makita BFT020F Visseuse

Catégories associées