Mode d’emploi Makita 6824 Visseuse

Mode d’emploi

4

ENGLISH (Original instructions)

Explanation of general view

1 Locking sleeve

2 Locator

3 Switch trigger

4 Lock button

5 Reversing switch lever

6Hook

7Bit

8 Magnetic bit holder

SPECIFICATIONS

Model 6823 6824 6825 / 6825R

Capacities

Self drilling screw .....................................................................6 mm 6 mm —

Drywall screw ...........................................................................6 mm 5 mm 4 mm

No load speed (min

–1

) .................................................................0 – 2,500 0 – 4,500 0 – 6,000

Overall length ..............................................................................301 mm 290 mm 290 mm

Net weight ...................................................................................1.6kg 1.5 kg 1.5 kg

Safety class.................................................................................. /II /II /II

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

Intended use

The tool is intended for screw driving in wood, metal and

plastic.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

SPECIFIC SAFETY RULES

GEB017-2

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict

adherence to screwdriver safety rules. If you use

this power tool unsafely or incorrectly, you can

suffer serious personal injury.

1. Hold power tool by insulated gripping surfaces,

when performing an operation where the fas-

tener may contact hidden wiring or its own cord.

Fasteners contacting a “live” wire may make

exposed metal parts of the power tool “live” and

could give the operator an electric shock.

2. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

3. Hold the tool firmly.

4. Keep hands away from rotating parts.

5. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely hot

and could burn your skin.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated

in this instruction manual may cause serious per-

sonal injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Depth adjustment

The depth can be adjusted by turning the locking sleeve.

Turn it in “A” direction for less depth and in “B” direction

for more depth. One full turn of the locking sleeve equals

1.5 mm change in depth. (Fig. 1)

Adjust the locking sleeve so that the distance between

the tip of the locator and the screw head is approximately

1 mm as shown in Fig. 2 or 3. Drive a trial screw into your

material or a piece of duplicate material. If the depth is

still not suitable for the screw, continue adjusting until you

obtain the proper depth setting. (Fig. 2 & 3)

Switch action (Fig. 4)

CAUTION:

• Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

To start the tool, simply pull the switch trigger. Tool speed

is increased by increasing pressure on the switch trigger.

Release the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

NOTE:

• Even with the switch on and motor running, the bit will

not rotate until you fit the point of the bit in the screw

head and apply forward pressure to engage the clutch.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Makita 6824 Visseuse. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Makita. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Makita 6824 Visseuse dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Makita Visseuses
Plus de modes d’emploi de Visseuses

Foire aux questions sur Makita 6824 Visseuse

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Makita BFT124F Visseuse

Mode d’emploi

Makita DFS450 Visseuse

Mode d’emploi

Makita FS2200 Visseuse

Mode d’emploi

Makita DFT124R Visseuse

Mode d’emploi

Makita BFL061F Visseuse

Mode d’emploi

Makita BFL121F Visseuse

Mode d’emploi

Makita FS2700 Visseuse

Mode d’emploi

Makita DF001D Visseuse

Catégories associées