Mode d’emploi Makita UH6330 Taille-haies

Mode d’emploi

2

Thank you for purchasing a MAKITA product!

Congratulations on choosing a MAKITA hedge trimmer!

We are confident that you will be satisfied with this modern

machine.

Models UH 4030, UH 4830, UH 5530 and UH 6330 are very

light and handy hedge trimmers, with high performance and

a good power-to-weight ratio.

The ergonomic design of the grips and controls make for

comfortable and untiring operation during extensive jobs. A

strain reliever is provided for the power cord at both ends.

The safety features of the UH 4030, UH 4830, UH 5530 and

UH 6330 hedge trimmers are state of the art and meet all

international standards. These features include hand guards

on both handles, 2-hand grip safeties and a quick-stop function.

In order to ensure the proper functioning and performance

of your new hedge trimmer, and to safeguard your own

personal safety, it is imperative that you read this instruc-

tion manual thoroughly before operation. Be especially

careful to observe all safety precautions! Failure to ob-

serve these precautions can lead to severe injury or

death!

Table of contents

EU Conformity Declaration................................................2

Packaging ............................................................................2

Symbols ...............................................................................2

Delivery inventory ..............................................................3

SAFETY PRECAUTIONS ....................................................3

General precautions........................................................3

Protective equipment ......................................................3

Putting into operation.................................................. 3-4

Extension power cord .....................................................4

Transport and storage ....................................................4

Maintenance....................................................................4

First aid ...........................................................................4

Working technique ..........................................................5

Tips on hedge-trimming.....................................................5

Environmental protection information.............................5

Technical data.....................................................................6

Designation of components ..............................................6

PUTTING INTO OPERATION..............................................7

Checking the blade brake ..............................................7

MAINTENANCE ...................................................................7

Cleaning and maintaining the cutter ...............................7

Instructions for periodic maintenance.............................7

Trouble shooting ................................................................7

Service, spare parts and guarantee .................................8

Service centres (see enclosure)

EU Conformity Declaration

The undersigned, Junzo Asada and Rainer Bergfeld, as

authorized by DOLMAR GmbH, declare that the MAKITA

machines,

Type: UH 4030, UH 4830, UH 5530, UH 6330

manufactured by DOLMAR GmbH, Jenfelder Str. 38, 22045

Hamburg, Germany, conforms to the basic safety and health

requirements of the applicable EU guidelines:

EU Machine guideline 98/37/ EG

EU EMC guideline 89/336/ EWG (modified by 91/263/ EWG,

92/31/ EWG and 93/68/ EWG)

EU Low-voltage guideline 73/23/ EWG (modified by 93/68/

EWG)

The most important standards applied to properly meet the

requirements of the above EU guidelines were: EN 50144-1,

EN 50144-2-15, EN 55104, EN 55014, EN 61000-3-T2/-T3.

Hamburg, 6.12.1999

For DOLMAR GmbH

Junzo Asada Rainer Bergfeld

Managing Director Managing Director

Symbols

You will notice the following symbols on the hedge trimmer

and in the Instruction Manual:

Packaging

Your MAKITA hedge trimmer is delivered in a cardboard box

to protect it during shipping.

Cardboard is a basic raw material and is consequently

reuseable or suitable for recycling (waste paper recycling).

RE Y

STOP

RE Y

Read Instruction Manual and follow

all warnings and safety instructions!

Particular care and attention!

Forbidden!

Protect from rain and moisture!

Pull mains plug if power cord is damaged!

Pull mains plug!

Double protective insulation

Switch off motor!

Wear protective gloves!

Wear eye and hearing protection!

First aid

Recycling

CE-marking

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Makita UH6330 Taille-haies. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Makita. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Makita UH6330 Taille-haies dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Makita Taille-haies
Plus de modes d’emploi de Taille-haies

Foire aux questions sur Makita UH6330 Taille-haies

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Makita UH6350 Taille-haies

Mode d’emploi

Makita UH5570 Taille-haies

Mode d’emploi

Makita DUH751 Taille-haies

Mode d’emploi

Makita DUN461WZ Taille-haies

Mode d’emploi

Makita UH007GD201 Taille-haies

Mode d’emploi

Makita UH007GM201 Taille-haies

Mode d’emploi

Makita HTR5600 Taille-haies

Mode d’emploi

Makita UH4260 Taille-haies

Catégories associées