Mode d’emploi Makita UH7020 Taille-haies

Mode d’emploi

4

- NEVER affix the grip safeties in the down position!

- Operate the hedge trimmer only in the manner prescribed

by the instruction manual.

- Switch off the hedge trimmer immediately if you notice any

change in its behaviour.

- Immediately unplug the mains plug if the power cord should

become damaged or severed.

- Immediately switch off the motor and unplug the mains plug

if the cutter should come into contact with a fence or other

hard object. Check the cutter for damage.

- Before checking the cutter, taking care of faults, or

removing material caught in the cutter, always switch

off the trimmer and unplug the mains plug.

- Before taking breaks and before leaving the hedge trimmer

unattended, always switch it off and unplug the mains plug.

Place the trimmer in such a way that it cannot endanger

anyone.

Extension power cord

- Use only splash-proof extension cords that are approved

for outdoor use and marked as such.

- When selecting an extension cord, give preference to cords

in fluorescent or eye-catching colours.

- The hedge trimmer is protectively insulated in accordance

with VDE (German Electricians´ Association) Standard

0740 Class II, and can therefore be connected to plug

sockets without ground contact.

- Always work in such a way that the extension power cord

is behind you!

- Always start near the power source and work away from it.

This ensures that the extension cord stays behind the work

area.

- The trimmer power cord must likewise always be behind

the operator. Make sure that it does not get caught, or

comes into contact with sharp objects. Route the cord in

such a way that no persons can be endangered.

Important: Work especially carefully when the extension cord

has to be routed over the hedge!

- Do not use any extension cord with a line cross-section of

less than 3 x 1.5 mm

2

. When using a reel, make sure that

the cord is completely unrolled. The cord length must not

exceed 30 m / 100 ft!

Transportation and storage

- When moving the hedge trimmer to another

location, including during work, always un-

plug the mains plug.

- Never carry or transport the trimmer with the cutter

running!

- Never grasp the cutter with your hands!

- When transporting the hedge trimmer for more

than short distances, always put on the sheath

supplied with the unit.

- Carry the trimmer

only by the front handle. The

cutter should be pointing backwards.

- When carrying the hedge trimmer in a vehicle, make sure

it is in a secure position. It should be transported only in the

trunk or in a transport area separate from the driver.

- Store the hedge trimmer with the sheath on, in a dry room.

Keep it out of reach of children. Never store the trimmer

outdoors.

- Clean the hedge trimmer and especially the cutter after

use, and before putting the trimmer into storage for extend-

ed periods. Lightly oil the cutter and put on the sheath. The

sheath supplied with the unit can be hung on the wall,

providing a safe and practical way to store the hedge

trimmer.

Maintenance

- Switch off the trimmer and disconnect and

secure the mains plug before doing any

maintenance work.

- Make especially sure the cutter is undamaged and in good

condition.

- Regularly inspect the power cord for damage to the insula-

tion. If the power cord is damaged, disconnect the mains

plug.

- Regularly clean the trimmer.

- If the plastic housing is damaged, have the unit repaired by

a qualified service technician immediately. Shock hazard!

Danger of injury!

Follow the accident-prevention instructions and recom-

mendations of your trade association or insurer.

Do not make any modifications to the hedge trimmer.

Doing so will only endanger your safety.

Perform only the maintenance and repair works described

in the instruction manual. All other work must be carried out

by MAKITA Service.

Use only original MAKITA spare parts and accessories.

Using other than original MAKITA parts or accessories

brings a high risk of accidents. We cannot accept any

responsibility for accidents and damage resulting from non-

MAKITA parts and accesories which have not been ap-

proved.

First aid

For the event of a possible accident, please make sure that a

first aid kit is always immediately available close by. Immedi-

ately replace any items used from the first aid box.

When calling for help, give the following information:

- Place of the accident

- What happened

- Number of injured

- Kind of injuries

- Your name!

NOTE

Individuals with poor circulation who are exposed to excessive

vibration may experience injury to blood vessels or the nervous

system.

Vibration may cause the following symptoms to occur in the

fingers, hands or wrists: ”Falling asleep” (numbness), tingling,

pain, stabbing sensation, alteration of skin colour or of the skin.

If any of these symptoms occur, see a physician!

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Makita UH7020 Taille-haies. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Makita. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Makita UH7020 Taille-haies dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Makita Taille-haies
Plus de modes d’emploi de Taille-haies

Foire aux questions sur Makita UH7020 Taille-haies

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Makita UN490D Taille-haies

Mode d’emploi

Makita UH009GM201 Taille-haies

Mode d’emploi

Makita UH5570 Taille-haies

Mode d’emploi

Makita DUH752Z Taille-haies

Mode d’emploi

Makita UH7580 Taille-haies

Mode d’emploi

Makita UH004GZ Taille-haies

Mode d’emploi

Makita HTR5600 Taille-haies

Mode d’emploi

Makita UH550D Taille-haies

Catégories associées