Mode d’emploi Meradiso IAN 302128 Store à enrouleur

Mode d’emploi

IAN 302128

Cleaning

Not washable.

Dust this product with a duster or a vacuum cleaner set on low.

Service

If you have any questions or complaints, please e-mail us at the

following address:

[email protected]

IAN 302128

Please quote your IAN number.

Disposal

Do not dispose of the product with household rubbish. Contact your

local or municipal administration for information on how to dispose

of the product in an environmentally friendly and appropriate m

anner.

The packaging material can be disposed of through local recycling.

Information

Distributor

Goldner GmbH

Ringstrasse 24

AT-6830 Rankweil

AUSTRIA

Intended use

The product creates a pleasant room temperature and is intended

as a window decoration. The included wall mounting material is

only suitable for concrete, brick or wood walls. Any use other than

previously mentioned or any product modification is prohibited and

can lead to injuries and / or product damage. The manufacturer is

not liable for any damages caused by improper use. This product

is not intended for commercial use.

Technical Data

Material: 100 % polyester

Dimensions:

Width 60, 80 or 100 x height 150 cm or 80 x 210 cm

Parts description

1

Side pulley / pull chain

(pre-installed)

2

Pull chain safety clip

3

Weight rod

4

End caps

5

Blind bracket (pre-installed)

6

Hook

7

Top fix bracket

8

Mounting bracket

(pre-installed)

9

Wall bracket

Delivery contents

1 Side pulley / pull chain

(pre-installed)

1 Mounting bracket

(pre-installed)

2 Blind brackets

(left and right - pre-installed)

2 Top fix brackets

2 Hooks

1 Weight rod

2 End caps

1 Pull chain safety clip

2 Wall brackets

3 Wall plugs

3 Screws

1 Set of assembly instructions

Assembling the top fix brackets:

Attention, important! So that the window can be fully opened

(90 °) the distance between the casement and the embrasure must be

min. 5 cm (see Fig. 1). Therefore, you should check this distance first.

Step 1: Push the top fix brackets

7

approx. 4 cm left and

right into the side of the mounting bracket

8

(see Fig. A).

Slide the hooks

6

into the top fix brackets

7

and allow only

max. 1 x to snap into place (see Fig. B). Remove the protective

film on the glue pads on the top fix brackets

7

(never attach

the blind only using the adhesive strips). Hook the blind into the

casement in the desired position and press on firmly. Secure

the hooks

6

by also pressing them on firmly or snapping them

into place (see Fig. C). The hook

6

can be removed once

more by lifting the unlocking tab.

Step 2: Slide the weight rod

3

into the slightly unrolled blind.

Push the end caps

4

into the sides of the weight rod

3

(see

Fig. D).

Step 3: Screw the pull chain safety clip

2

into the wall. Se-

cure the chain in the pull chain safety clip

2

. The cord must be

secured to the wall using the pull chain safety clip so that it is

taut

2

(see Fig. E).

Screw assembly (assembly on a wall, ceiling or recess):

Step 1: Measure the position of the blind. Drill the fastening

bores, insert wall plugs into the bores and secure the wall

brackets

9

(see Fig. F). Clip the blind into the top of the wall

bracket

8

on the mounting bracket

9

and press on firmly or

snap into the bottom (see Fig. F). Then carry out Step 2 and 3

in the same way as you would assemble the top fix brackets.

This product is not a toy!

CAUTION! RISK OF

INJURY! Please ensure

that no parts are damaged

and that all parts are in-

stalled correctly. Incorrect

installation could result in

injury. Damaged parts could

impact safety and function.

Assembly

Note: The side pulley / pull chain

1

(pre-installed) may be

assembled on the right or the left.

To do so firmly pull both of the blind brackets

5

out of the

mounting bracket

8

and blind and reinsert or assemble on

the opposite side.

Decide whether you want to assemble the blind with the top

fix brackets or using screws to the wall / ceiling/ recess.

strangulation and entangle-

ment. A child‘s neck may be

tangled in ropes.

Position beds, cots and

furniture away from ropes

for window coverings.

Do not knot ropes. Ensure

the ropes do not tangle,

forming a loop.

WARNING!

DANGER TO LIFE!

Always keep children away

from the product (strangu-

lation hazard, small parts

which could be swallowed).

Important safety instructions

Damages due to failure to observe these instructions for installation

and use will void the warranty!

We assume no liability for consequential damage! We assume no

liability for property damage or personal injury due to improper

handling or failure to observe the safety instructions!

Note: For personal safety it‘s important to observe these safety

instructions.

ATTENTION

RISK OF STRAN-

GULATION!

Small children could be

strangled by loops in pull

cords, chains, straps and

inner cords for operating

the product.

Keep ropes out of the reach

of children to prevent

List of pictograms used

Observe the warnings and safety notices!

Risk of strangulation!

Do not wash

Do not use bleach

Do not tumble dry

Do not iron

Do not dry clean

Dispose of the packaging and product in an

environmentally-friendly manner!

Double roller blind

Introduction

Congratulations! You have purchased a high-quality product. Familia

r-

ise yourself with the product before using it for the first time. Please

carefully read the following instructions for installation and use and

important safety instructions. Only use the product as described

and for the indicated purpose. Keep these instructions in a safe

place. If passing this product on to a third party also include all

documents.

STORE ENROULEUR DUO

Notice de montage et d‘utilisation,

Consignes de sécurité importantes

DUO-ROLLO

Montage- und Bedienungsanleitung,

Wichtige Sicherheitshinweise

DUO ROLGORDIJN

Montage- en gebruiksaanwijzing,

Belangrijke veiligheidsinstructies

DOUBLE ROLLER BLIND

Installation and operating instructions,

Important safety instructions

DOUBLE ROLLER BLIND

A B

6

C D

34

E F

2

9

6 7 9

2

4

8

1

3

5

7

1

302128_mer_Duo-Rollo_450x296mm_GB_IE_NI_BE.indd 1 01.02.18 12:32

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Meradiso IAN 302128 Store à enrouleur. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Meradiso. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Meradiso IAN 302128 Store à enrouleur dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Meradiso Stores à enrouleur
Plus de modes d’emploi de Stores à enrouleur

Foire aux questions sur Meradiso IAN 302128 Store à enrouleur

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Meradiso IAN 309642 Store à enrouleur

Mode d’emploi

Meradiso IAN 291968 Store à enrouleur

Mode d’emploi

Meradiso IAN 302024 Store à enrouleur

Mode d’emploi

Meradiso IAN 298032 Store à enrouleur

Mode d’emploi

Meradiso IAN 293719 Store à enrouleur

Mode d’emploi

Luxaflex XL-40 Store à enrouleur

Mode d’emploi

IKEA FONSTERBLAD Store à enrouleur

Mode d’emploi

IKEA TRETUR Store à enrouleur

Catégories associées