Mode d’emploi Metabo NV 83A5 Cloueur

Mode d’emploi

5

English

SAFETY — Continued

WARNING

When using tools, basic precautions should always be followed, Including the following:

1. Work area

(1) Keep the work area clean and well lighted.

Cluttered benches and dark areas increase the risks

of electric shock, fi re, and injury to persons.

(2) Do not operate the Nailer in explosive

atmospheres, such as in the presence of

fl ammable liquids, gases, or combustible dust.

The Nailer is able to create sparks resulting in the

ignition of the dust or fumes.

(3) Keep bystanders, children, and visitors away

while operating the Nailer. Distractions are able to

result in the loss of control of the Nailer.

2. Personal safety

(1) Stay alert. Focus on your work and use common

sense when working with the Nailer. Do not use

the Nailer while tired, after having consumed

drugs or alcohol, or while under the infl uence of

medication.

A moment of inattention while operating the Nailer

increases the risk of injury to persons.

(2) Dress properly. Do not wear loose clothing or

jewelry. Contain long hair. Keep hair, clothing,

and gloves away from moving parts.

Loose clothes, jewelry, or long hair increases the

risk of injury to persons as a result of being caught in

moving parts.

(3) Avoid unintentional starting. Be sure the switch

is off before connecting to the air supply. Do

not carry the Nailer with your fi nger on the switch or

connect the Nailer to the air supply with the switch on.

(4)

WARNING

– Disconnect the Nailer from

the air source before making adjustments, doing

Nailer maintenance, clearing jams, touching

the Push Lever, when not in use, leaving work

area, leaving the Nailer outside of the operator's

supervision or control, loading, or unloading the

Nailer, handing it to another person, elevating,

lowering or otherwise moving the Nailer to a new

location. Never attempt to clear a jam or repair the

Nailer unless you have disconnected air hose from

the Nailer and removed all remaining fasteners from

the Nailer. The Nailer should never be left unattended

since people who are not familiar with the Nailer

might handle it and injure the themselves.

Such precautionary measures reduce the risk of

injury to persons.

(5) Do not overreach. Keep proper footing and

balance at all times. Proper footing and balance

enables better control of the Nailer in unexpected

situations.

(6) Use safety equipment. A dust mask, non-skid

safety shoes and a hard hat must be used for the

applicable conditions.

(7)

WARNING

– Risk of hearing loss. Wear

hearing protection. Hearing protection shall

have a Noise Reduction Rating (NRR) determined

in accordance with US Environmental Protection

Agency rules that is appropriate for noise exposure.

(8) Always wear head protection.

Always wear head protection to protect your

head from fl ying objects.

(9) Do not attach the hose or Nailer to your body.

Attach the hose to the structure to reduce the risk of

loss of balance if the hose shifts.

(10)

WARNING

– Drive Nails into proper work

surface only. Do not drive nail into other nails. This

is able to cause the fastener to be defl ected and hit

someone, or cause the Nailer to react and result in a

risk of injury to persons.

3. Nailer use and care

(1) Use clamps or another practical way to secure

and support the workpiece to a stable platform.

Holding the work by hand or against the body is

unstable and is able to lead to loss of control.

(2) Do not force the Nailer. Use the correct Nailer for

the application. The correct Nailer will do the job

better and safer at the rate for which the Nailer is

designed.

(3) Do not use the Nailer if the switch does not

turn the Nailer on or off . Any Nailer that cannot be

controlled with the switch is dangerous and must be

repaired.

Never use Nailer which is defective or operating

abnormally. If the Nailer appears to be operating

unusually, making strange noises, or otherwise

appears defective, stop using it immediately and

arrange for repairs by a metabo HPT authorized

service center.

000BookNV83A5USmetabo.indb5000BookNV83A5USmetabo.indb5 2018/05/2214:47:442018/05/2214:47:44

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Metabo NV 83A5 Cloueur. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Metabo. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Metabo NV 83A5 Cloueur dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Metabo Cloueurs
Plus de modes d’emploi de Cloueurs

Foire aux questions sur Metabo NV 83A5 Cloueur

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Metabo NR 90AC5 Cloueur

Mode d’emploi

Metabo NV 75A5 Cloueur

Mode d’emploi

Metabo NR 38AK Cloueur

Mode d’emploi

Metabo NV 83A2 Cloueur

Mode d’emploi

Metabo NV 65AH2 Cloueur

Mode d’emploi

Metabo NR 90AD(S1) Cloueur

Mode d’emploi

Metabo NV 90AG(S) Cloueur

Mode d’emploi

Metabo NR 90AF(S1) Cloueur

Catégories associées