Mode d’emploi Microlife IR 210 Thermomètre

Mode d’emploi

3



Do not use this device close to strong electromagnetic fields such

as mobile telephones or radio installations. Keep a minimum

distance of 3.3 m from such devices when using this device.

 Protect it from:

- extreme temperatures

- impact and dropping

- contamination and dust

- direct sunlight

- heat and cold

 If the device is not going to be used for a prolonged period the

battery should be removed.



WARNING: The measurement results given by this device

is not a diagnosis. It is not replacing the need for the consul-

tation of a physician, especially if not matching the patient’s

symptoms. Do not rely on the measurement result only,

always consider other potentially occurring symptoms and

the patient’s feedback. Calling a doctor or an ambulance is

advised if needed.

3. How this Thermometer measures Temperature

This thermometer measures infrared energy radiated from the

eardrum and the surrounding tissue. This energy is collected

through the lens and converted to a temperature value. The

measured reading obtained directly from the eardrum (Tympanic

Membrane) ensures the most accurate ear temperature.

Measurements taken from the surrounding tissue of the ear canal

generate lower readings and may result in misdiagnosis of fever.

To avoid an inaccurate measurement

1. Fit a new Microlife branded and undamaged probe cover CK on

the measuring sensor 1.

2. Switch on the thermometer by pressing the START/IO button

6

.

3. After one beep is heard (and the temperature scale icon is

flashing), straighten the ear canal by gently pulling the middle

of the ear back and up.

4. Place the probe 1 firmly into the ear canal. «Good» will be

displayed with a short beep to confirm the device has detected

the correct position. Press the START/IO button 6 and keep

the probe in the ear until the thermometer beeps to signal the

completion of the measurement.

4. Control Displays and Symbols

 All segments displayed 7: Press the START/IO button 6 to

turn on the unit; all segments will be shown for 1 second.

 Ready for measurement 9: When the unit is ready for

measurement, the «°C» or «°F» icon will keep flashing.

The probe LED light is activated and will keep flashing.



Correct position indication

AT

:

The probe LED light will stop

flashing (stays illuminated) and «good» will be displayed on the

LCD, when the measuring sensor detects an appropriate position.



Measurement complete

AK

:

The reading will be shown on the

display

2

with the «

°C

» or «

°F

» icon; the unit is ready for the

next measurement, when the «

°C

» or «

°F

» icon is flashing again.

 Low battery indicator AP: When the unit is turned on, the

«battery» icon will keep flashing to remind the user to replace

the battery.

5. Setting Date, Time and Beeper Functions

Setting the date and time

1. After the new battery is fitted, the year number flashes in the

display BQ. You can set the year by pressing the M-button 3.

To confirm and then set the month, press the MODE button 4.

2. Press the M-button 3 to set the month. Press the MODE

button 4 to confirm and then set the day.

3. Follow the previously mentioned instructions to set the day,

hours and minutes.

4. Once you have set the minutes and pressed the START/IO

button 6, the date and time are set and the time is displayed.



If no button is pressed for 20 seconds, the device automat-

ically switches to ready for measuring 9.



Cancel time setup:

Press the START/IO button

6

during

time setup. The LCD will show Date/Time icons with «--:--».

After that press the START/IO button

6

to start the measure-

ment. If no further action is taken within 60 seconds, the

device will automatically turn off.



Change current date and time:

Press and hold the MODE

button

4

for approx. 8 seconds until the year number starts

to flash

BQ

. Now you can enter the new values as described

above.

Setting the beeper

1. Press and hold the MODE button 4 for 3 seconds to set the

beeper BR.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Microlife IR 210 Thermomètre. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Microlife. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Microlife IR 210 Thermomètre dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Microlife Thermomètres
Plus de modes d’emploi de Thermomètres

Foire aux questions sur Microlife IR 210 Thermomètre

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Microlife MT 1751 Thermomètre

Mode d’emploi

Microlife IR 1DA1 Thermomètre

Mode d’emploi

Microlife VT 1831 Thermomètre

Mode d’emploi

Microlife IR 1DE1 Thermomètre

Mode d’emploi

Microlife NC 150 BT Thermomètre

Mode d’emploi

Microlife MT 16E1 Thermomètre

Mode d’emploi

Microlife IR 1DB1 Thermomètre

Mode d’emploi

Microlife NC 120 Thermomètre

Catégories associées