Mode d’emploi Milwaukee 2555-20 Visseuse à choc

Mode d’emploi

3

• When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal

to another. Shorting the battery terminals together

may cause burns or a re.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

• Do not use a battery pack or tool that is dam-

aged or modied. Damaged or modied batteries

may exhibit unpredictable behavior resulting in re,

explosion or risk of injury.

• Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specied in the instructions. Charging

improperly or at temperatures outside the specied

range may damage the battery and increase the risk

of re.

SERVICE

• Have your power tool serviced by a qualied

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service dmaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

IMPACT WRENCH

•Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring. Fasteners contacting

a “live” wire may make exposed metal parts of the

power tool “live” and could give the operator an

electric shock.

• Wear ear protectors when impact drilling. Expo-

sure to noise can cause hearing loss.

• Use only sockets and other accessories spe-

cically designed for use on impact wrenches

and drivers. Other sockets and accessories might

shatter or break causing injury.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

•

WARNING

Some dust created by power sanding,

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

lter out microscopic particles.

FUNCTIONAL DESCRIPTION

1. Belt clip

2. Control

switch

3. Handle

4. Trigger

5. LED

6. 3/8" Friction ring

(Cat. No. 2554-20)

9

1

2

4

3

5

7

6

7. 4-Mode drive control

8. 1/2" Friction ring

(Cat. No. 2555-20)

9. 1/2" Square drive

with pin detent

(Cat. No. 2555P-20)

Cat. No. 2554-20

8

SYMBOLOGY

Volts

Direct Current

No Load Revolutions per Minute (RPM)

Impacts per Minute Under Load (IPM)

C

US

UL Listing for Canada and U.S.

SPECIFICATIONS

Cat. No. .....................2554-20, 2555-20, 2555P-20

RPM ........................................................... 0 - 2700

IPM ............................................................ 0 - 3200

Volts.............................................................. 12 DC

Battery Type .................................................M12™

Charger Type................................................M12™

Recommended Ambient

Operating Temperature ......................0°F to 125°F

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Milwaukee 2555-20 Visseuse à choc. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Milwaukee. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Milwaukee 2555-20 Visseuse à choc dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Milwaukee Visseuses à chocs
Plus de modes d’emploi de Visseuses à chocs

Foire aux questions sur Milwaukee 2555-20 Visseuse à choc

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Milwaukee 2868-22HD Visseuse à choc

Mode d’emploi

Milwaukee 0799-20 Visseuse à choc

Mode d’emploi

Milwaukee 2967-20 Visseuse à choc

Mode d’emploi

Milwaukee 2863-22R Visseuse à choc

Mode d’emploi

Milwaukee 2767-22 Visseuse à choc

Mode d’emploi

Milwaukee 2966-20 Visseuse à choc

Mode d’emploi

Milwaukee 2855P-20 Visseuse à choc

Mode d’emploi

Milwaukee 2759B-20 Visseuse à choc

Catégories associées