Mode d’emploi Philips GC3330 Fer à repasser

Mode d’emploi

Storage

1 Set the steam control to position 0, remove the

plug from the wall socket and let the iron cool

down.

2 Clean the appliance and wipe scale and any other

deposits off the soleplate with a damp cloth and a

non-abrasive (liquid) cleaner.

Keep the soleplate smooth: avoid hard contact with

metal objects.

Never use a scouring pad, vinegar or other chemicals.

3 Regularly rinse the water tank with water and

empty it after cleaning (Fig. 14).

4 Wind the mains cord round the cord storage

facility (Fig. 15).

5 Always store the iron on its heel in a safe and dry

place.

Environment

Do not throw away the appliance with the normal

household waste at the end of its life, but hand it in

at an ofcial collection point for recycling. By doing

this, you help to preserve the environment (Fig. 16).

Guarantee & service

If you need information or if you have a problem, please

visit the Philips website at www.philips.com or contact

the Philips Customer Care Centre in your country

(you nd its phone number in the worldwide guarantee

leaet). If there is no Customer Care Centre in your

country, go to your local Philips dealer or contact the

Service Department of Philips Domestic Appliances and

Personal Care BV.

Frequently asked questions

This chapter lists the questions most frequently asked

about the appliance. If you cannot nd the answer to

your question, contact the Customer Care Centre in your

country.

General:

Question Answer

Why does the

soleplate stay

cold although I

have plugged in

the iron?

There may be a connection

problem. Check the mains cord, the

plug and the wall socket.

The temperature dial may be set

to MIN. Set the temperature dial to

the required position.

Why do water

droplets drip

onto the fabric?

The cap of the lling opening may

not be closed properly. Press the

cap until you hear a click.

You may have poured an

additive into the water tank. Rinse

the water tank and do not put any

additive in the water tank.

The iron may not be hot enough

for steam ironing. Set the

temperature dial to a temperature

suitable for steam ironing (2 to

MAX). Put the iron on its heel and

wait until the amber temperature

light goes out.

Why do akes

and impurities

come out of the

soleplate during

ironing?

Hard water forms akes inside

the soleplate. Use the Calc-

Clean function one or more

times (see chapter ‘Cleaning and

maintenance’).

Why does the

red light ash

(GC3360 only)?

The safety shut-off function may

have switched off the iron (see

chapter ‘Features’). Move the iron

slightly to deactivate the safety

shut-off function. The red light goes

out.

,

Question Answer

Why does water

drip from the

soleplate after

the iron has

cooled down or

has been stored

(GC3321/

GC3320 only)?

You may have put the iron in

horizontal position with water

still left in the water tank. Empty

the water tank and set the steam

control to position 0 after use.

Store the iron on its heel.

Steam ironing:

Question Answer

Why

doesn’t any

steam come out

of the iron?

There may not be enough water in

the water tank. Fill the water tank

(see chapter ‘Preparing for use’).

The steam control may be set to

position 0. Set the steam control

to a position between 1 and 4 (see

chapter ‘Using the appliance’).

The iron may not be hot enough

and/or the drip-stop function has

been activated. Select an ironing

temperature that is suitable for

steam ironing (2 to MAX). Put

the iron on its heel and wait until

the amber temperature light goes

out before you start to iron.

Why doesn’t

the horizontal

or vertical

steam boost

function work?

You may have used the steam

boost function too often within

a short period. Continue ironing in

horizontal position and wait a while

before you use the horizontal or

vertical steam boost function again.

The iron may not be hot enough.

Select an ironing temperature that

is suitable for steam ironing (2 to

MAX). Put the iron on its heel and

wait until the amber temperature

light goes out before you start to

iron.

4239.000.6589.3

3/9

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Philips GC3330 Fer à repasser. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Philips. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Philips GC3330 Fer à repasser dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Philips Fers à repasser
Plus de modes d’emploi de Fers à repasser

Foire aux questions sur Philips GC3330 Fer à repasser

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Philips GC2115 Fer à repasser

Mode d’emploi

Philips HI124 Fer à repasser

Mode d’emploi

Philips GC6722 Fer à repasser

Mode d’emploi

Philips DST1030 Fer à repasser

Mode d’emploi

Philips DST7511 Azur Fer à repasser

Mode d’emploi

Philips GC9220 PerfectCare Fer à repasser

Mode d’emploi

Philips GC8460 Fer à repasser

Mode d’emploi

Philips GC7430 Fer à repasser

Catégories associées