Mode d’emploi Remington RM4216 Tronçonneuse

Mode d’emploi

4

OTHER SAFETY WARNINGS

• Follow all maintenance instructions in this manual.

• All service, other than the maintenance procedures described in

this manual, should be performed by an authorized service dealer.

• Do not use the unit if it is not working correctly, has been

dropped, damaged, left outdoors or dropped into water. Have

the unit serviced by an authorized service dealer.

• Before inspecting, servicing, cleaning, storing, transporting or

replacing any parts on the unit:

1. Stop the unit.

2. Make sure all moving parts have stopped.

3. Allow the unit to cool.

4. Disconnect the spark plug wire.

• Secure the unit while transporting.

• Always use the scabbard on the guide bar and saw chain during

transportation and storage.

• Always store the unit and fuel in a cool, dry and well-ventilated

space. Do not store fuel, or a unit with fuel in the tank, indoors

where fumes may reach open flames (pilot lights, etc.) or sparks

(switches, electrical motors, etc.).

• Store the unit in a dry place, secured or at a height to prevent

unauthorized use or damage. Keep the unit out of the reach of

children.

• Never douse or squirt the unit with water or any other liquid. Keep

handles dry, clean and free from debris, oil, fuel and grease. Clean

the unit after each use. Refer to Cleaning and Storage. Do not use

solvents or strong detergents.

• Keep these instructions. Refer to them often and use them to

instruct other users. If you loan this unit to others, also loan

them these instructions.

SAVE THESE INSTRUCTIONS

Kickback Safety Precautions

Take the following steps to reduce the chance of accident or injury:

• Do not rely exclusively upon the safety devices built into the unit.

• Do not cut above shoulder height.

• Do not overreach. Always keep proper footing and balance. Take

extra care when working on steep slopes or inclines.

• Do not make cuts with the tip of the guide bar.

• Make sure the area of operation is free from obstructions. Do not

let the tip of the guide bar contact any object, such as a log,

branch, the ground or other obstruction.

• Always inspect the wood before cutting. Foreign objects could

damage the unit or cause serious personal injury. Never cut

through nails, metal rods, railroad ties or pallets.

• Do not operate the unit with one hand! Serious injury to the

operator, helpers or bystanders may result from one-handed

operation. This unit is intended for two-handed use. Always grip

the unit firmly with both hands when the unit is running. Hold the

front handle with the left hand and the rear handle with the right

hand. Firmly encircle the handles with the thumbs and fingers.

Do not let go. A firm grip will help maintain control of the unit

and reduce the chance of kickback.

• Stand slightly to the left of the unit to avoid being in the direct

line of the saw chain.

• Never start the saw when the guide bar is inside an existing cut.

Be extremely careful when re-entering a cut.

• Always begin a cut with the unit running at full speed. Fully

squeeze the throttle control and maintain a steady cutting

speed. Slower speeds increase the chance of kickback.

• Keep the saw housing pressed firmly against the wood.

• Do not cut more than one log or branch at a time.

• Do not twist the unit when removing the guide bar from a cut.

• Watch out for shifting objects (logs, branches, etc.) that might

pinch or fall onto the saw chain during operation.

• Only use wedges made of wood or plastic. Do not use metal to

hold a cut open.

• Follow the manufacturer’s sharpening and maintenance

instructions for the saw chain.

• Only use replacement bars and chains specified by the

manufacturer or the equivalent. These are available from

authorized service dealers. Use of any unauthorized parts or

accessories could lead to serious injury to the operator or

damage to the unit and will void the warranty.

• Use devices that reduce the risks associated with kickback,

such as low-kickback chains, guide bar nose guards, chain

brakes and low-kickback guide bars. There are no other

replacement components for achieving kickback protection in

accordance with CSA Z62.3.

• A low-kickback saw chain is a chain that has met the kickback

performance requirements of ANSI/OPEI B175.1-2012 when

tested according to the provisions specified in ANSI/OPEI

B175.1-2012. A low-kickback saw chain is a chain that is also in

accordance with CSA Z62.3. Do not use a replacement saw

chain unless it has met these requirements for this specific

model or has been designated as a low-kickback replacement

saw chain in accordance with ANSI/OPEI B175.1-2012. As saw

chains are sharpened, some of the low-kickback qualities are

lost and extra caution should be used.

• Do not install a bow guide on this unit. Bow guides have larger

kickback zones, which increase the chance of kickback and

serious injury. This increase is not significantly reduced by using

a low-kickback saw chain. Using a bow guide on this unit is

extremely dangerous.

Fig. A

Fig. B

Rotational

Kickback

Kickback

Danger Zone

Saw Chain

Direction

Linear

Kickback

Pinch

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Remington RM4216 Tronçonneuse. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Remington. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Remington RM4216 Tronçonneuse dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Remington Tronçonneuses
Plus de modes d’emploi de Tronçonneuses

Foire aux questions sur Remington RM4216 Tronçonneuse

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Remington RM4050 Tronçonneuse

Mode d’emploi

Remington RM1035P Tronçonneuse

Mode d’emploi

Remington RM2599 Tronçonneuse

Mode d’emploi

Remington RM1025P Tronçonneuse

Mode d’emploi

Remington RM4218 Tronçonneuse

Mode d’emploi

Remington RM4620 Tronçonneuse

Mode d’emploi

Remington RM4040 Tronçonneuse

Mode d’emploi

Remington RM1025SPS Tronçonneuse

Catégories associées