Mode d’emploi Rotel RDV-995 Lecteur DVD

Mode d’emploi

2

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

OF PLUG TO WIDE SLOT. INSERT FULLY.

APPLICABLE FOR USA, CANADA OR WHERE

APPROVED FOR THE USAGE

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE

DANS LA BORNE CORRESPONDANTE DE LA PRISE ET

POUSSER JUSQU AU FOND.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: There are no user serviceable parts inside. Refer all servicing to qualified

service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose the unit to

moisture or water. Do not allow foreign objects to get into the enclosure. If the

unit is exposed to moisture, or a foreign object gets into the enclosure, immedi-

ately disconnect the power cord from the wall. Take the unit to a qualified ser-

vice person for inspection and necessary repairs.

Read all the instructions before connecting or operating the component. Keep this manual so

you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the product itself. Fol-

low all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

You must allow 10 cm or 4 inches of unobstructed clearance around the unit. Do not place the

unit on a bed, sofa, rug, or similar surface that could block the ventilation slots. If the compo-

nent is placed in a bookcase or cabinet, there must be ventilation of the cabinet to allow proper

cooling.

Keep the component away from radiators, heat registers, stoves, or any other appliance that

produces heat.

The unit must be connected to a power supply only of the type and voltage specified on the

rear panel of the unit.

Connect the component to the power outlet only with the supplied power supply cable or an

exact equivalent. Do not modify the supplied cable in any way. Do not attempt to defeat grounding

and/or polarization provisions. Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed

to heat, or damaged in any way. Pay particular attention to the power cord at the plug and

where it exits the back of the unit.

The power cord should be unplugged from the wall outlet if the unit is to be left unused for a

long period of time.

Immediately stop using the component and have it inspected and/or serviced by a qualified

service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

Place the unit on a fixed, level surface strong enough to support

its weight. Do not place it on a moveable cart that could tip over.

This equipment has been tested and found to comply with the limits for a Class B digital de-

vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment gene rates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio com-

munications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. DANGER: Visible laser radiation when open and interlock failed or bypassed. Avoid direct

exposure to beam.

3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the player;

leave all servicing to qualified service personnel.

WARNING!

To reduce the risk of electrical shock, fires, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose the unit to rain or moisture.

3. Do not touch the power cord or plug with wet hands.

RDV-995 DVD Player

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Rotel RDV-995 Lecteur DVD. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Rotel. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Rotel RDV-995 Lecteur DVD dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Rotel Lecteurs DVD
Plus de modes d’emploi de Lecteurs DVD

Foire aux questions sur Rotel RDV-995 Lecteur DVD

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Rotel RDV-1093 Lecteur DVD

Mode d’emploi

Lenco DVP-939 Lecteur DVD

Mode d’emploi

Sony DVP-SR370B Lecteur DVD

Mode d’emploi

Panasonic DVD-S59 Lecteur DVD

Mode d’emploi

Soundmaster PDB1600 Lecteur DVD

Mode d’emploi

LG DVD5353 Lecteur DVD

Mode d’emploi

OK OPD 270 Lecteur DVD

Mode d’emploi

LG DP281B Lecteur DVD

Catégories associées