Mode d’emploi SentrySafe SFW123BSC Coffre-fort

Mode d’emploi

Your SentrySafe Product

Your SentrySafe product has a number of features to keep your

important documents and valuables protected including:

Water Protection UL Classified

Fire Protection

Digital Media

Protection

Preparing Your Safe for First Time Use

1

2

Slide out the battery drawer on the side

of the keypad. Insert 4 AAA alkaline

batteries (not included). DO NOT use

rechargeable batteries or any other

type of non-alkaline battery.

Do not mix old and new batteries.

Do not mix alkaline and standard batteries.

Slide battery drawer back into keypad until it clicks into place.

Using Your Safe

Enter the 5 digit factory code found on the back of this

owner’s manual.

Turn handle downward to open safe.

IMPORTANT: Test your code several times before putting

valuables inside.

IMPORTANT: If you exert too much force on the handle,

the handle will move without moving the bolts. When this

happens, you will hear a ’click.’ DO NOT be alarmed.

This feature is designed to protect the bolts from being

overpowered by force. Simply exert force in the opposite

direction (lifting up) until the handle clicks back

into place.

Thank you for choosing SentrySafe to store all your important documents and valuables.

We hope that this product will help you stay organized and provide you with the peace-of-mind of knowing the things most important to you are protected.

Water/Fire-Resistant Digital Safe with Fingerprint Scanner

3

4

Using Your SentrySafe

The digital lock on your safe comes with two flexible solutions

for entry: a digital keypad and fingerprint scanner. You will

be able to program two 5 digit codes in addition to the factory

code found on the back of this owner’s manual. The fingerprint

scanner can also be programmed for up to two users, with two

fingerprints per user.

NOTE: To add or delete a secondary user’s fingerprint, you must

have previously programmed a 5 digit primary user code.

NOTE: Factory code cannot be deleted.

Programming Digital

Keypad Entry

NOTE: Green light will blink to indicate the safe is in

program mode.

To Add a Primary User Code

Only 1 primary user code can be programmed at a time.

1

2

Press: “P”

Enter the 5 digit “FACTORY CODE”

(found on the back of this owner’s manual).

Press a 5 digit primary user code you have

chosen for your safe

3

Deleting a Primary User Code

1

2

Press: “P”

Enter the 5 digit “FACTORY CODE”

(found on the back of this owner’s manual).

Press: “0” –“0” –“0” –“0” –“0”

NOTE: The electronic lock will NOT indicate that it has

deleted the user code—please test code to make sure it

has been deleted.

NOTE: A primary user code is necessary to adding/deleting

a secondary user code/fingerprint.

3

Programming the Secondary Code

Only 1 secondary user code can be programmed at a time.

1

2

Press: “P”

Enter your programmed 5 digit primary user code.

Press a personal 5 digit secondary user code.

3

1

2

Press: “P”

Enter your programmed 5 digit primary user code.

Press: “0” –“0” –“0” –“0” –“0”

NOTE: The electronic lock will NOT indicate that it has

deleted the user code—please test code to make sure it

has been deleted.

3

Deleting a Secondary Code

Deleting a Primary Fingerprint User

1

2

Press: “P”

Enter the 5 digit “FACTORY CODE”

(found on the back of this owner’s manual).

Swipe any fingerprint once.

Press: “C”

NOTE: The electronic lock will NOT indicate that it has

deleted the user’s fingerprint—please test to make sure

it has been deleted.

NOTE: This will delete both fingerprints for this user.

3

4

Programming Your

Fingerprint Scanner

NOTE: Green light will blink to indicate

the safe is in program mode.

NOTE: Each user will have the ability

to program two fingerprints.

NOTE: Turning the keypad sound off

may make it more difficult to use

fingerprint scanner as a single beep

indicates your finger has been scanned.

To Add a Primary Fingerprint User

1

2

Press: “P”

Enter the 5 digit “FACTORY CODE”

(found on the back of this owner’s manual).

NOTE: Blue light will blink to indicate the fingerprint

sensor is ready to scan a new fingerprint.

Swipe the first finger 5-10 times.

Between each finger swipe you should hear a single beep

to indicate the fingerprint was scanned.

When the safe has registered the first fingerprint the green

indicator light will blink 3 times and you will hear

3 beeps.

To register a second fingerprint for this user – immediately

repeat steps 3 & 4 with a second finger for this user.

-OR-

If you would like to program only one finger

press “C”.

3

4

5

• Do not choose a finger with a cut or scar.

• Make sure hands are clean and dry before programming or

operating the fingerprint scanner.

• For optimal performance, clean the fingerprint sensor periodically

with a dry, lint-free cloth.

• The fingerprint sensor may not work well when cold.

Your Digital

Fingerprint Lock

Tips for Using Your

Fingerprint Scanner

Dual Key Lock

IMPORTANT: A dual key lock option is included

in your safe. Using this key can disable/enable

entry into the safe. This is NOT an override key.

Key must be in horizontal position to access safe.

English

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos SentrySafe SFW123BSC Coffre-fort. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter SentrySafe. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre SentrySafe SFW123BSC Coffre-fort dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour SentrySafe Coffres-forts
Plus de modes d’emploi de Coffres-forts

Foire aux questions sur SentrySafe SFW123BSC Coffre-fort

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

SentrySafe CHW30220 Coffre-fort

Mode d’emploi

SentrySafe STW123GTC Coffre-fort

Mode d’emploi

SentrySafe SFW082D Coffre-fort

Mode d’emploi

SentrySafe CHW20221 Coffre-fort

Mode d’emploi

SentrySafe T8-311 Coffre-fort

Mode d’emploi

SentrySafe SFW123GTF Coffre-fort

Mode d’emploi

SentrySafe S0310 Coffre-fort

Mode d’emploi

SentrySafe FPW082C Coffre-fort

Catégories associées