Mode d’emploi SentrySafe SFW205UPC Coffre-fort

Mode d’emploi

Programming Safe Features

OTHER PROGRAMMABLE SAFE FEATURES

Length of Interior Light

NOTE: The Factory Code (FC) or User Code (UC) must be

entered to program safe settings. A secondary code cannot

be used.

Touch the keypad to wake up the safe.

Press: “0” – “PROG” – “PROG” – “(FC)” OR “(UC)” – “2”

Press: “0” to program to turn off

“1” to program for 30 seconds

“2” to program for 60 seconds

Digital Keypad Sound On/Off

Touch the keypad to wake up the safe.

Press: “0” – “PROG” – “PROG” – “(FC)” OR “(UC)” –“1”

Press: “1” to turn on the digital keypad sound or

Press: “0” to turn off the digital keypad sound

Programming Safe Features

BATTERY AUXILIARY OVERRIDE

If battery power in the safe is running low and cannot operate the

safe, you will need to use the Battery Auxiliary Override feature to

open the safe.

IMPORTANT: This should not be used as a primary means to

gain entry into the safe.

1

2

5

Open the silicone cap found on the side

of the lock.

Insert a 9 volt battery into this slot.

Touch the keypad to wake up the safe.

Enter your five digit code.

Turn handle to open safe.

DO NOT use rechargeable batteries or any other type of

non-alkaline battery.

3

4

Safe Warnings and

Important Information

• DO NOT store delicate items directly in your safe.

– In order to protect your valuables from potential threats of

flood, your safe is equipped with an airtight gasket. Because

of this gasket, moisture in the air could potentially be locked

inside your safe and accumulate inside your safe.

– The desiccant bag included in your safe during shipment

should be left inside your safe. DO NOT DISCARD IT. It is

intended to help absorb moisture. Replace or recharge your

desiccant bag every 6 months for optimum performance.

– If you choose to store delicate items such as jewelry with

working parts, watches, stamps or photos in your safe, we

recommend putting them in an air-tight container prior to

placing in the safe for storage.

– NOTE: SentrySafe will not be responsible for any damage or

loss of items placed in the unit due to moisture.

• DO NOT store pearls in this safe unit. In the event of a fire, the

interior of your safe may reach up to 350˚F. While this temperature

is safe for your paper documents, digital media

and other valuables, pearls can be damaged at much

lower temperatures.

• DO NOT store any film based technology or media in

this safe.

– This product is not intended to protect computer floppy disks

or diskettes, film cartridges, tapes, audio/video cassettes or

photo negatives.

• Your safe is only part of your total security protection.

– SentrySafe recommends that you store your safe in closets,

offices, basements, bedrooms and any other locations that

are convenient for you but out of direct line of sight from

prying eyes. The location of the safe does not affect the

safe’s ability to protect your valuables inside.

• This product is not intended for the secure

storage of all materials. Items such as

firearms, other weapons, combustible

materials and medication should not be

stored in this unit.

1

2

3

1

2

3

If your SentrySafe product is in a fire, it will be sealed shut making it necessary for it to be pried open. To help your family begin again, SentrySafe will ship a replacement

free of charge. To be eligible for the Limited Lifetime After Fire Replacement Program, you (the original owner) must register your product using the included registration form

or by visiting www.registermysafe.com.

For more information about the Limited Lifetime After-Fire Replacement Program, visit SentrySafe.com

Limited Lifetime After-Fire Replacement Program

Programming Safe Features

YOUR DIGITAL LOCK

Programming the User Code (UC)

Only 1 user code can be programmed at a time.

1

2

Touch the keypad to wake up the safe.

Press: “PROG” – “FACTORY CODE (FC)”

(found on the back of this owner’s manual).

The Program indicator light will blink.

Press the five digit user code you have chosen

for your safe.

3

Deleting a User Code

1

2

Touch the keypad to wake up the safe.

Press: “PROG” – “FACTORY CODE (FC)”

(found on the back of this owner’s manual).

The Program indicator light will blink.

Press: “0” –“0” –“0” –“0” –“0”

NOTE: The electronic lock will NOT indicate that it has

deleted the user code—please test code to make sure it has

been deleted.

3

4

4

Programming the Secondary Code (SC)

Only 1 user code can be programmed at a time.

1

2

Touch the keypad to wake up the safe.

Press: “PROG” – “PROG” – “PROGRAMMED USER CODE (UC)”

The Program indicator light will blink.

Press the five digit secondary code you have chosen for this safe.

3

4

1

2

Touch the keypad to wake up the safe.

Press: “PROG” – “PROG” – “PROGRAMMED USER CODE (UC)”

The Program indicator light will blink.

Press: “0” –“0” –“0” –“0” –“0”

NOTE: The electronic lock will NOT indicate that it has

deleted the user code—please test code to make sure it

has been deleted.

3

4

Deleting a Secondary Code

Cleaning Your Keypad

Use a soft cloth or microfiber cloth to wipe the surface of your lock

to remove fingerprints.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos SentrySafe SFW205UPC Coffre-fort. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter SentrySafe. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre SentrySafe SFW205UPC Coffre-fort dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour SentrySafe Coffres-forts
Plus de modes d’emploi de Coffres-forts

Foire aux questions sur SentrySafe SFW205UPC Coffre-fort

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

SentrySafe QAP2E Coffre-fort

Mode d’emploi

SentrySafe SFW123DUB Coffre-fort

Mode d’emploi

SentrySafe 1210 Coffre-fort

Mode d’emploi

SentrySafe A3819 Coffre-fort

Mode d’emploi

SentrySafe FPW082KSB Coffre-fort

Mode d’emploi

SentrySafe SFW082CTB Coffre-fort

Mode d’emploi

SentrySafe SF123CS Coffre-fort

Mode d’emploi

SentrySafe STW123GTC Coffre-fort

Catégories associées