Mode d’emploi Sharp GX-BT60 Haut-parleur

Mode d’emploi

• If you receive an incoming call at an inconvenient time, let your voice mail answer it

for you.

• Let the person you are speaking to know you are driving; if necessary, suspend the

call in heavy traffi c or hazardous weather conditions. Rain, sleet, snow, ice, and heavy

traffi c can be hazardous.

• Do not take notes or look up phone numbers while driving. Remember that your

primary responsibility is driving safely.

• Do not engage in stressful or emotional conversations that may be distracting.

• Make people you are talking to aware you are driving and suspend conversations that

can divert your attention away from the road.

• In the case of  re, traffi c accidents, medical or other serious emergencies, dial the local

emergency number.

• Call roadside assistance or a special non-emergency wireless assistance number when

necessary.

Care and Handling

Your SHARP Bluetooth device is a precision engineered instrument. To ensure its

ongoing performance, you should look after it as you would any quality consumer

electronic product, and use it in accordance with the instructions.

SHARP recommends that you take the following precautions.

• Avoid leaving your device in direct sunlight, such as on the dashboard or console of a

car or truck. Do not leave your device unattended in your vehicle.

• Do not leave your device, or use your device, in any area where the temperature may

exceed 60 degrees Centigrade (140 degrees Fahrenheit), such as inside a closed car

on a hot day.

• Remember that on a hot day the temperature inside a closed car may be signi cantly

higher than the outside air temperature.

• Do not leave your device, or use your device, in any area where the temperature is

likely to drop below 0 degrees Centigrade (32 degrees Fahrenheit).

• Do not use any household or industrial grade detergents or cleaners to clean your

device. If your device becomes dirty or smeared, in most instances a wipe with a dry or

slightly damp cloth should be suffi cient to clean it.

• Do not leave your Bluetooth device connected to a power supply for long periods

after it is fully charged. SHARP does not recommend long periods of continued

charging.

• Before charging your SHARP device, make sure that the cable is not damaged. If you

notice any abnormalities, seek advice from a quali ed professional.

• If traveling internationally, ensure that your SHARP wall or car power adapter is

approved for use in the country where you plan to use it and hat the adapter voltage is

suited to the local power supply.

EN

• Should a fault develop with your SHARP product, contact SHARP for advice on how

to proceed.

• Do not attempt to repair or alter any SHARP product yourself.

Approved Accessories

The use of accessories not approved by SHARP, may cause your SHARP device to

malfunction or in the case of non-approved electrical accessories may cause the device

to exceed RF energy exposure guidelines.

Use of non approved accessories will void your device’s warranty.

Electromagnetic Interference

Nearly every electronic device is susceptible to electromagnetic interference (EMI) if

inadequately shielded, electromagnetic con gured for electromagnetic compatibility.

Similar to a mobile phone, your SHARP device is a low power transmitter / receiver and

is covered by regulations pertaining to such devices. Turn off your SHARP device in any

facility where posted notices instruct you to do so. These facilities may include hospitals

or health care facilities that may be using equipment that is sensitive to external RF

energy.

• When instructed to do so, turn off your SHARP device when on board an aircraft. Any

use of a mobile device must be in accordance with applicable laws, regulations and

airline crew instructions.

• Some Bluetooth devices may interfere with some hearing aids. In the event of such

interference, you may want to consult your hearing aid manufacturer or physician to

discuss alternatives.

• If you use any other personal medical device, consult the manufacturer of your device

to determine if it is adequately shielded from RF energy. Your doctor or physician may

be able to assist you in obtaining this information.

• If you are in doubt about whether your SHARP device be safely turned on or

used, please consult an authorised person in the location you want to use your

SHARP device. If no authorised person is available or you remain uncertain, SHARP

recommends that you turn off your Bluetooth device and any mobile phones unless

they are required in an emergency situation.

How to remove the battery for disposal

RISK OF INJURY. WEAR GLOVES WHEN WORKING!

The battery should be removed by an authorized Sharp service centre. Not doing

so will invalidate any guarantees and warranties on your device.

1. Use a  at screwdriver to gently prize away the fabric cover.

2. Remove the 5 screws with Philips screwdriver on middle plastic cover.

3. Take off the middle plastic part.

2

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Sharp GX-BT60 Haut-parleur. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Sharp. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Sharp GX-BT60 Haut-parleur dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Sharp Haut-parleurs
Plus de modes d’emploi de Haut-parleurs

Foire aux questions sur Sharp GX-BT60 Haut-parleur

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Sharp CP-AWS0101 Haut-parleur

Mode d’emploi

Sharp GX-BT480 Haut-parleur

Mode d’emploi

Sharp HT-SB100K Haut-parleur

Mode d’emploi

Sharp CP-LS100 Haut-parleur

Mode d’emploi

Sharp GX-BT280 Haut-parleur

Mode d’emploi

Sharp CP-LSBP1 SumoBox Haut-parleur

Mode d’emploi

Sharp PS-919 Haut-parleur

Mode d’emploi

Sharp PS-919 WH Haut-parleur

Catégories associées