Mode d’emploi Swingline DSM07-13 Destructeur

Mode d’emploi

6 7

Warranty

Limited Two Year Warranty (Excluding Cutters)

ACCO Brands (Returns Center) USA, 101 Bolton Ave 9E, Booneville

MS 38829, ACCO Brands Canada Inc., 5 Precidio Court, Brampton,

ON L6S-6B7, ACCO MEXICANA S.A. DE C.V Circuito de la Industria

Norte No. 6 Parque Industria Lerma, Lerma Edo. de México C.P. 52000

México. (each, respectively, “ACCO Brands”) warrants to the original

purchaser that this ACCO Brands product (except for the cutters) is free

from defects in workmanship and material under normal use and service

for a period of two (2) years after purchase. (The cutters are excluded

from this warranty.)

ACCO Brands’ obligation under this warranty is limited to replacement or

repair, at ACCO Brands’ option, of any warranted part found defective by

ACCO Brands without charge for material or labor. Any replacement, at

ACCO Brands’ option, may be the same product or a substantially similar

product that may contain remanufactured or refurbished parts. This

warranty shall be void in the following circumstances:

(i) if the product has been misused,

(ii) if the product has been damaged by negligence or accident, or

(iii) if the product has been altered by anyone other than ACCO Brands or

ACCO Brands’ authorized agents.

For warranty execution, please call:

1-800-541-0094 in the USA

1-800-263-1063 in Canada

1-800-758-6825 in Mexico

Or go to www.swingline.com.

Additional Limited Warranty For Cutters

ACCO Brands guarantees the cutting blades of the shredder to be

free from defects in material and workmanship for as long as original

purchaser owns the product on SS20-08, SX16-08, DS22-13, DX18-13,

DS22-19 and DX20-19 and for one (1) year from date of purchase by

original consumer on SM12-08, DM12-13 and DSM07-13.

* Please note that the cutter blades will be progressively worn down by

shredding fastened sheets (staples and paperclips) - this is not covered

in the warranty. With regards to CD shredding, Swingline

®

departmental

and small office shredders have been designed to shred up to 500

and 300 CDs respectively during the warranty period. Excessive cd

shredding will wear the cutters and is not covered within the warranty.

**Models SM12-08, DM12-13 and DSM07-13 have NOT been designed

to shred CD’s and credit cards. Any attempt to do so will invalidate this

warranty.

TO THE EXTENT ALLOWED BY APPLICABLE LAW, THIS WARRANTY IS IN

LIEU OF ALL OTHER EXPRESSED WARRANTIES. REPRESENTATIONS OR

PROMISES INCONSISTENT WITH OR IN ADDITION TO THIS WARRANTY

ARE UNAUTHORIZED AND SHALL NOT BE BINDING ON ACCO BRANDS.

TO THE EXTENT PERMITTED BY APPLICABLE LAWS, ANY IMPLIED

WARRANTIES (IF APPLICABLE) ARE LIMITED IN DURATION TO THE

DURATION OF THIS WARRANTY. SOME STATES AND JURISDICTIONS

DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRAN-

TY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. TO

THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL

ACCO BRANDS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, PUNITIVE,

EXEMPLARY, CONSEQUENTIAL OR SIMILAR DAMAGES, WHETHER OR

NOT FORSEEABLE. SOME STATES AND JURISDICTIONS DO NOT ALLOW

THE EXCLUSION OR LIMITATION OF SPECIAL, INCIDENTAL, PUNITIVE,

EXEMLARY, CONSEQUENTIAL, OR SIMILAR DAMAGES, SO THE ABOVE

EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.

FOR CONSUMERS WHO HAVE THE BENEFIT OF CONSUMER PROTEC-

TION LAWS OR REGULATIONS IN THEIR JURISDICTION OF PURCHASE

OR, IF DIFFERENT, IN THEIR JURISDICTION OF RESIDENCE, THE

BENEFITS CONFERRED BY THIS WARRANTY ARE IN ADDITION TO ALL

RIGHTS AND REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION

LAWS AND REGULATIONS.

To the extent permitted by law, this warranty is not transferable and

will automatically terminate if the original product purchaser sells or

otherwise disposes of the product.

This warranty gives you specific legal rights. Other rights, which vary

from jurisdiction to jurisdiction, may exist. In addition some jurisdictions

do not allow (i) the exclusion of certain warranties, (ii) limitations on how

long an implied warranty lasts and/or (iii) the exclusion or limitation of

certain types of costs and/or damages, so the above limitations may

not apply.

Bin Full

When the bin is full the shredder will not function and the bin

full symbol will illuminate red.

When this happens you must empty the bin.

• Pull open the bin to empty (SS20-08, SX16-08, SM12-08)

• Open the door and pull out the bag frame (DS22-13,

DX18-13, DM12-13, DSM07-13, DS22-19, DX20-19)

Once the bin is empty, close the door/drawer and press the

auto button to resume shredding.

Note: SX16-08, DX18-13, DX20-19, DM12-13, DSM07-13

- Once the shredder bag has been reinserted and/or cabinet

door has been closed, the shredder will run in reverse for

three seconds, stop for two seconds and then forward for

three seconds to clear away any remaining paper from the

cutter mechanism. This unique ‘self-cleaning’ mechanism is

additional jam prevention technology from ACCO.

Shredder Accessories

We recommend that a paper shredder bag for recycling

shredded paper is used on all models. Please see the table

below for the correct accessory code for your model.

Reverse Function

• Should you wish to reverse the shredding direction while

shredding a document, a reverse button (F) has been fitted

for your convenience.

• By pressing the reverse button the shredding cutters will

change direction allowing the retrieval of the document being

shredded. The anti-jam indicator will turn to red.

• The reverse function will only run whilst the button is being

pressed. When the reverse button has been released the

shredder will revert to stand by mode.

• To turn back to auto mode, press the auto button (E).

CD and Credit Card Shredding

Models SM12-08, DM12-13 and DSM07-13 can not shred

CD’s or credit cards, therefore this section is not applicable to

these three models. All other Jam Free models can shred CD’s

and credit cards as follows:

• A separate CD tray is provided on some models to collect the

shredded CD shards. Ensure that this is correctly mounted

onto the bin rail or internal bin before shredding CDs or credit

cards. CD and credit card shards should be disposed of

separately to paper.

• Pull up the CD guide (H) located in the centre of the feed

area and flip it into position over the shredder mouth.

• For credit card shredding, switch the shredder to auto mode

and insert the card in line with the arrow marked on the

shredder mouth. Only shred 1 credit card at a time.

• For CD shredding, extend the sides of the CD guide, switch

the shredder to auto mode and place the CD into the centre

of the CD slot. Only shred 1 CD at a time.

• Empty the CD tray (where provided) after 8 credit cards or

CD’s to avoid waste spilling over into the paper waste bin.

Remove the CD tray before recommencing to shred paper.

Operation

• After unpacking the product, pull out the shredder bin or bag

frame (depending on model) and remove the CD shard tray,

which sits on top of the bag frame on departmental models

or bin on small office models. Store this tray on the external

location points (I) and use when you shred CD’s or credit

cards to separate waste for recycling (not applicable for

SM12-08, DM12-13 and DSM07-13 models).

• Connect shredder to mains supply.

• Ensure the on/off button on the back of the machine is in the

on position (D).

• To commence shredding, press the central Auto button (E).

This will illuminate the anti jam indicator.

This sets the shredder into auto mode and initiates the Jam

Free anti jam mechanism. The standby symbol will illuminate

blue and the anti-jam indicator will glow green.

You are now able to shred.

• Insert paper to be shredded into the feed area. The Jam Free

anti jam mechanism will sense the thickness of the paper

being shredded.

If the paper thickness is within the shredder’s capacity, the

motor will start and your documents will be shredded. Cutters

will stop once the shredding process is complete.

If the paper thickness is greater than the shredder’s sheet

capacity, the anti-jam indicator will turn from green to red

and the motor will not run.

• If this happens, remove some of the sheets from the paper

stack and re-try until the anti-jam indicator reverts back to

green, the shredder will then automatically start and allow

the paper to be shredded.

• If the shredder is left in auto mode for more than 2 minutes

without being used, the shredder will automatically turn back

to standby mode in order to save power.

• The shredder will automatically ‘wake up’ from sleep mode

when paper is inserted into the shredder mouth. There is no

need to press the Auto button (E).

Accessory Description Part Number

Models: SS20-08, SX16-08 and SM12-08 (8 gallon)

Plastic Bag 1765016

Paper Bag 1765022

Oil 1760049

Models: DS22-13, DX18-13, DM12-13 and DSM07-13 (13 gallon)

Plastic Bag 1765010

Paper Bag 1765024

Oil 1760049

Models: DS22-19 and DX20-19 (19 gallon)

Plastic Bag 1765010

Paper Bag 1765024

Oil 1760049

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Swingline DSM07-13 Destructeur. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Swingline. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Swingline DSM07-13 Destructeur dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Swingline Destructeurs
Plus de modes d’emploi de Destructeurs

Foire aux questions sur Swingline DSM07-13 Destructeur

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Swingline LM12-30 Destructeur

Mode d’emploi

Swingline Stack-and-Shred 300X Destructeur

Mode d’emploi

Swingline Stack-and-Shred 750X Destructeur

Mode d’emploi

Swingline DS22-19 Destructeur

Mode d’emploi

Swingline SM12-08 Destructeur

Mode d’emploi

Swingline Stack-and-Shred 60X Destructeur

Mode d’emploi

Swingline EX10-05 Destructeur

Mode d’emploi

Swingline EX14-06 Destructeur

Catégories associées