Mode d’emploi Tefal FV5356K0 Aquaspeed Fer à repasser

Mode d’emploi

Before first use

•

Before using your iron with the steam function for the first time, we recommend that you operate it in a horizontal

position for a few moments, away from your linen. Operate the Power zone trigger several times under the

same conditions.

• There may be a release of smoke, a harmless odour and a light spray of particles when you use your appliance

for the first time. This has no effect on the use of the iron and will disappear quickly.

Preparation

What water to use?

• Your appliance has been designed to operate using untreated tap water. However, it is necessary

to operate the Self-Clean function regularly in order to eliminate hard water deposits from the

steam chamber.

• Never use water containing additives (starch, scents, softeners, etc.), or water produced by

condensation (e.g. water from tumble-driers, refrigerators, air conditioners, rain water). The types

of water contain organic waste or mineral elements that can cause spitting, brown staining, or

premature wear of the appliance.

Filling the water tank

• Unplug your iron before filling it.

• Set the steam control to – fig.1.

• Take the iron in one hand and tilt it slightly, with the point uppermost.

• Open the water tank lid – fig.2.

• Fill the tank up to the “MAX” line – fig.3.

• Close the flap of the water tank.

Use

Adjust the temperature and the steam

• Set the thermostat control – fig.4, referring to the table below.

• The thermostat light comes on. It will go out when the soleplate is hot enough – fig.5.

RECOMMENDATIONS

• Select setting and save 20% energy compare with the maximum position.

• Your iron heats up quickly: so begin by ironing fabrics that are ironed at low temperatures first, then go on to those requiring a higher

temperature,

• If you turn down the thermostat, wait until the thermostat light comes back on before beginning to iron again,

• When ironing fabrics with mixed fibres, set the ironing temperature for the most delicate fibre. For delicate fabrics we recommend

testing the fabric first on an inconspicious place eg (inside the hem).

Spray Function (spray)

• Whether steam or dry ironing, you are able to use the spray button to dampen laundry to remove

stubborn creases – fig.6.

Obtain more steam

• Turn the thermostat to “MAX” or “•••”.

• Operate the Power zone trigger from time to time – fig.7.

• To avoid drips, leave an interval of a few seconds between operations.

Fill the tank up to the “MAX”.

Never fill the appliance by hol-

ding it directly under the tap.

Do not remove the anti-scale

valve to fill the water tank.

If your water is very hard, it is

possible to mix tap water with

store-bought distilled or demi-

neralised water in the following

proportions : - 50% tap water,

- 50% distilled or demineralised

water.

= STEAM ZONE

In order to avoid water dripping from

the iron onto the linen:

- Turn off the steam when ironing silk

or synthetic fabrics.

- Set it at the minimum position for

wool.

Make sure that there is water in

the tank before using this button.

FABRIC

POSITION OF

THERMOSTAT CURSOR

STEAM SETTING

POSITION

LINEN

COTTON

WOOL

SILK / SYNTHETIC (Polyes-

ter, Acetate, Acrylic, Nylon)

MAX

•••

••

•

3

Description

1. Spray nozzle

2. Anti-scale valve release button

3. Anti-scale valve

4. Steam control

5. Water tank filler flap

6. Spray Button

7. Auto-Stop safety light (depending on model)

8. Electric power cord

9. Easycord system

10. Thermostat indicator light

11. Extra Stable heel

12. Power zone trigger

13. Thermostat control

14. Autoclean Catalys

®

Soleplate (depending on model)

Please read these

instructions care-

fully. Remove any

labels from the sole-

plate before heating

up the iron.

1800132812 FV53XX E0 A11_110x154 03/03/14 09:37 Page3

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Tefal FV5356K0 Aquaspeed Fer à repasser. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Tefal. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Tefal FV5356K0 Aquaspeed Fer à repasser dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Tefal Fers à repasser
Plus de modes d’emploi de Fers à repasser

Foire aux questions sur Tefal FV5356K0 Aquaspeed Fer à repasser

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Tefal FV5873Z0 Fer à repasser

Mode d’emploi

Tefal FV5844Z0 Fer à repasser

Mode d’emploi

Tefal FV2843M0 Fer à repasser

Mode d’emploi

Tefal SV6116M0 Fer à repasser

Mode d’emploi

Tefal FV5781E1 Fer à repasser

Mode d’emploi

Tefal FV2847E0 Fer à repasser

Mode d’emploi

Tefal FV5840Z0 Fer à repasser

Mode d’emploi

Tefal FV2890S0 Fer à repasser

Catégories associées