Mode d’emploi Velleman WC50D Horloge

Besoin d'un mode d’emploi pour votre Velleman WC50D Horloge ? Ci-dessous, vous pouvez consulter et télécharger gratuitement le mode d’emploi PDF en français. Ce produit a actuellement 3 questions fréquemment posées, 0 commentaires et 0 votes. Si ce n'est pas le mode d’emploi que vous souhaitez, veuillez nous contacter.

Votre produit est défectueux et le mode d’emploi n’offre aucune solution ? Rendez-vous à un Repair Café pour obtenir des services de réparation gratuits.

Mode d’emploi

Loading…

WC50D
V. 01 23/10/2014 4 ©Velleman nv
7. Operation
Important:
Remove the protection pin [E] before first use! Dispose of it in a safe way.
Do not attempt to reinsert the pin afterwards as this will surely damage the clock.
1. Insert a battery in the battery compartment (see below). All hands will move forward towards
12:00. Note: when the original position of the second hand is between 11:55 and 12:00, the second
hand will make a full turn before stopping at 12:00. The same happens with the minute hand when
the original position is between 11:52 and 12:00.
2. Choose a location for the clock (see 6. Working principle).
3. Wait until the clock receives the synchronization signal from the master clock. This might take up to
15 minutes. Note that the received signal is usually stronger at night time.
4. Once synchronized, the hands will start moving towards the correct time.
5. When the clock does not receive the radio-signal, it will start running showing the wrong time.
However, it will keep attempting to synchronize.
Manual setting
It is possible to set the time manually, e.g. for use in places where no radio-signal is received.
Press and hold the manual set button [C]. After ± 3 seconds the minutes and hour hands start
moving. Hold down the manual set button [C] and release a couple of minutes before desired time
setting. Press the manual set button [C] repeatedly until the desired time indication is reached.
When no press is detected within 7 seconds, the clock starts running.
Forced receiving
To force the clock to synchronize, press and hold the forced receiving button [B] for ± 3 seconds.
The current time is stored in memory and all hands will start moving towards 12:00. The clock
attempts to synchronize with the master clock.
When synchronization is successful, the hands will move towards the correct time. If it fails however,
the hands will move towards the time that was memorized.
Reset
To reset the time and memory, use a piece of metal (e.g. a blank paperclip) to short circuit the two
metal reset pins [A].
All hands will move to the 12:00 position and the memory is cleared. The clock will attempt to
synchronize to the master clock.
8. Cleaning and maintenance
Wipe the device regularly with a moist, lint-free cloth.
Do not use alcohol or solvents.
9. Battery
Insert a new 1.5 V AA battery in the battery compartment [D] in accordance with the polarity
markings inside the battery compartment.
10. Technical Specifications
power supply
1 x 1.5 V AA-battery LR6C (not incl.)
dimensions
dial: Ø 47 cm
clock: Ø 50.5 x 5.5 cm
weight
± 2.3 kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
Télécharger mode d’emploi en Français (PDF, 0.62 MB)
(Tenez compte de l’environnement et imprimez ce manuel uniquement si c’est vraiment nécessaire)

Loading…

Évaluation

Dites-nous ce que vous pensez du Velleman WC50D Horloge en laissant une note de produit. Vous voulez partager vos expériences avec ce produit ou poser une question ? Veuillez laisser un commentaire au bas de la page.
Etes-vous satisfait du Velleman WC50D Horloge ?
Oui Non
Soyez le premier à évaluer ce produit
0 évaluations

Joignez-vous à la conversation sur ce produit

Ici, vous pouvez partager ce que vous pensez du Velleman WC50D Horloge. Si vous avez une question, lisez d’abord attentivement le mode d’emploi. La demande d’un mode d’emploi peut être effectuée en utilisant notre formulaire de contact.

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Velleman WC50D Horloge. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Velleman. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Velleman WC50D Horloge dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Marque Velleman
Modèle WC50D
Catégorie Horloges
Type de fichier PDF
Taille du fichier 0.62 MB

Tous les modes d’emploi pour Velleman Horloges
Plus de modes d’emploi de Horloges

Foire aux questions sur Velleman WC50D Horloge

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Qu’est-ce qu’un mouvement à quartz ? Vérifié

Les montres et horloges à quartz sont actionnées par une pile. Cela envoie un courant électrique à travers des cristaux de quartz qui vont vibrer. Ces vibrations sont transmises au mouvement. Parce que les vibrations ont une fréquence fixe, les montres et horloges à quartz sont extrêmement précises.

Cela a été utile (94) En savoir plus

Que signifie « GMT » ? Vérifié

« GMT » signifie « Greenwich Mean Time » (temps moyen de Greenwich) et est parfois appelé « UTC » pour « Coordinated Universal Time » (temps universel coordonné). Il s’agit du temps correspondant à la longitude 0 passant à par Greenwich près de Londres.

Cela a été utile (79) En savoir plus

Qu’est-ce qu’un « chronographe » ? Vérifié

Un « Chronographe » est littéralement un « écrivain du temps ». Le terme est utilisé pour décrire les horloges et les montres qui indiquent l’heure du jour ainsi que pour mesurer une certaine période de temps, comme un chronomètre.

Cela a été utile (59) En savoir plus
Mode d’emploi Velleman WC50D Horloge

Produits connexes

Catégories associées

×
Download