Mode d’emploi Vivanco FMH 6150 Casque

Mode d’emploi

11

Licence

This Vivanco RF product conforms to the European R&TTE directive for RF systems in

harmonised frequency ranges. These systems may be sold and operated in the EU and in

EFTA countries.

Operation is not permitted in any countries not named.

The declaration of conformity is included at the end of this manual.

Warranty

The warranty period is 24 months from the date of purchase.

Hotline

Contact Germany: Telephone hotline 01805 / 404910 (0.12 € / min.)

or http://www.vivanco.de.

European contacts can be found at http://www.vivanco.com.

10

3. Charging of the rechargeable batteries starts automatically and the charging

indicator light of the charging tray switches to red.

If the charge indicator doesn’t change to red, move the handset back and forth slightly

in the charging shell until the charging contacts snap into place correctly and the

charge indicator changes to red.

4. Note: Before the first use, charge the rechargeable batteries continuously

for 15 hours in order to obtain the full capacity.

The RF headphone has a protective charging function for longer battery life. After

approx. 15 hours the discharged batteries are fully charged again.

You can now enjoy music again for approx. 14 hours at an average volume.

Using different batteries

The RF headphone can also be used with other chargeable standard AAA micro batteries

or non-chargeable 1.5 V AAA batteries. Standard chargeable AAA micro batteries cannot,

however, be charged via the devices.

Disposing of the batteries and rechargeable batteries

Consider the environment when disposing of the batteries or rechargeable batteries,

which must not be thrown away with domestic rubbish. Do not use old and new batteries

or different battery types simultaneously. Remove batteries from the device if it is not to

be used for a long time.

Technical specifications

No. of channels: 3

Frequency range: 863 - 865 MHz

Modulation: FM

Power supply: Transmitter: AC adapter 12 Volt/ 200mA

RF headphone: 2x micro AAA batteries

Transmitting power: max. 10 mW

Operating temperature: 5 - 40° C

Subject to alteration.

Trouble-shooting

If your device should not function properly, please proceed as follows:

1. Using the following table of malfunctions, try to find and correct the fault.

2. Read the corresponding section in these instructions carefully.

3. Look on the Internet at www.vivanco.com to see whether the fault and its correction

are described.

4. Ask your dealer.

5. Call the telephone hotline 01805 / 40 49 10 (€0.12/min.) for Germany. You will find

contacts for Europe at www.vivanco.com

GB GB



Problem

No transmission / no sound

Interference can be heard during

transmission

No charging - the charging display

doesn't switch onto loading (red

LED)

Possible cause

Devices are outside range

Batteries are empty

Connection cut off

Incoming signal not loud enough

Interference on channel

Batteries are almost empty

Devices are on outer margin of

range

Position of transmitter

Headphones don't stand on the

charger optimally

Solution

Reduce distance between devices.

If ordinary batteries are used, replace them.

If you use the supplied batteries, charge them.

Check whether or not all plugs are correctly plugged in.

Increase the volume of the incoming signal (music, etc.).

Change the channel using the Auto-Tuning function.

The batteries are almost empty and need to be replaced. If you

use the supplied batteries – charge them.

Transmitter and RF headphone are too far apart. Bring the RF

headphone closer to the transmitter.

In some cases it may be necessary to place the transmitter

somewhere else or higher.

Check whether the side of the headphones marked with " L "

show to the left. Move the headphones then into the charger

carefully back and forward until the charging connections lock

correctly and the charging display switches to red.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Vivanco FMH 6150 Casque. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Vivanco. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Vivanco FMH 6150 Casque dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Vivanco Casques
Plus de modes d’emploi de Casques

Foire aux questions sur Vivanco FMH 6150 Casque

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

SilverCrest IAN 374056 Casque

Mode d’emploi

SilverCrest IAN 445698 Casque

Mode d’emploi

Cellularline BTMSTWSFLOWG Flow Casque

Mode d’emploi

Fresh'n Rebel Code Core Casque

Mode d’emploi

Hama 00184121 Freedom Run Casque

Mode d’emploi

Panasonic RZ-S300 Casque

Mode d’emploi

Hama 00184131 Gloss Casque

Mode d’emploi

Hama 00184137 Advance Casque

Catégories associées