Mode d’emploi VonHaus 3500192 Scie sabre

Mode d’emploi

A5P | 01

If devices are provided for the connection of dust extrac-

tion and collection facilities, ensure these are connected

and properly used. Use of dust collection can reduce

dust-related hazards.

WORK AREA SAFETY Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

Do not operate power tool/machine in explosive atmos-

pheres, such as in the presence of ammable liquids,

gases or dust.

Power tool/machine create sparks which may ignite the

dust or fumes.

Keep children and bystanders away while operating a

power tool/machine. Distractions can cause you to lose

control.

GENERAL POWER TOOL USE AND CARE Do not force

the power tool/machine. Use the correct power tool/ma-

chine for your application. The correct power tool/ma-

chine will do the job better and safer at the rate for which

it was designed.

Do not use the power tool/machine if the switch does not

turn it on and o. Any power tool/machine that cannot

be controlled with the switch is dangerous and must be

repaired.

Disconnect the plug from the power source and/or the

battery pack from the power tool/machine before making

any adjustments, changing accessories, or storing pow-

er tool/machine tools. Such preventive safety measures

reduce the risk of starting the power tool/machine ac-

cidentally.

Store idle power tool/machine out of the reach of children

and do not allow persons unfamiliar with the power tool/

machine or these instructions to operate the power tool/

machine.

Power tool/machines are dangerous in the hands of un-

trained users.

Maintain power tool/machines. Check for misalignment

or binding of moving parts, breakage of parts and any

other condition that may aect the power tool/machines

operation. If damaged, have the power tool/machines re-

paired before use. Many accidents are caused by poorly

maintained power tool/machines.

Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edg-

es are less likely to bind and are easier to control.

Use the power tool/machine accessories and tool bits in

accordance with these instructions, take into account the

working conditions and the work to be performed.

Use of the power tool/machine for operations dierent

from those intended could result in a hazardous situation.

CLEANING & MAINTENANCE Never soak or immerse

electrical components and or a component that has a

plug attached.

Disconnect the plug from the power source before mak-

ing any adjustments, changing accessories, or storing.

Such preventive safety measures reduce the risk of start-

ing the power tool accidentally.

Ensure the motor has fully stopped before cleaning,

clearing a blockage, checking, or carrying out any main-

tenance on the tool.

Maintain your power tool. Check for misalignment or

binding of moving parts, breakage of parts and any oth-

er condition that may aect the power tool’s operation.

If damaged, have the power tool repaired by a qualied

repair person before use. Many accidents are caused by

poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

Regularly check external nuts and xings to ensure vibra-

tion caused by normal use has not begun to loosen them.

Store idle power tools out of reach of children and do

not allow persons unfamiliar with the power tool or these

instructions to operate the Breaker.

Locate the power tool out of reach of children, in a dry,

locked unit.

Make sure that the cord is located so that it will not be

stepped on, tripped over, or otherwise subjected to dam-

age or stress.

Remove the plug from the mains socket / battery (where

applicable) before carrying out any adjustment or main-

tenance.

Always store the power tool/machine in a dry place.

If the power cord is damaged, it must be replaced by a

qualied service technician.

Keep the ventilation slots and motor housing as free of

dirt and dust as possible (where applicable).

Clean the power tool/machine by rubbing it with a clean

cloth and blow it clean using low-pressure compressed

air is recommended.

Ensure you have all the pieces listed. If you are missing

any components, contact our customer services depart-

ment at [email protected] (UK/EU)

[email protected] (US).

DO NOT proceed with assembly if any components are

missing.

BATTERY WARNINGS (INCLUDING BUTTON CELLS,

AA BATTERY S, LITHIUM PACKS)

WARNING The use, and particularly abuse of portable

sealed secondary lithium cells and batteries may result in

the creation of hazards and may cause harm.

Do not dismantle, open or shred secondary cells or bat-

teries.

Keep batteries out of the reach of children.

NOTE the battery pack is not fully charged out of the box.

Secondary cells and batteries need to be charged before

use, always refer to the cell or battery manufacturer’s in-

structions and use the correct charging procedure.

Recharge only with the charger specied by the manu-

facturer. A charger that is suitable for one type of battery

pack may create a risk of re when used with another

battery pack.

Use the appliance/power tool/machines only with specif-

ically designated battery packs. Use of any other battery

packs may create a risk of injury and re.

First read the safety instructions and then follow the

charging notes and procedures.

Incorrect reassembly may result in a risk of electric shock

or re.

Protect the battery and charger against water and mois-

ture. Always keep cells and batteries clean and dry.

Wipe the cell or battery terminals with a clean dry cloth if

they become dirty.

Protect the battery from heat and re. Place the charger

in a position away from any heat source and avoid stor-

age in direct sunlight.

Do not maintain secondary cells and batteries on charge

when not in use.

After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times

to obtain maximum performance.

Do not short-circuit a cell or battery.

Do not store cells or batteries haphazardly in a box or

drawer where they may short-circuit each other or be

short-circuited by conductive materials. When the bat-

tery pack is not in use, keep it away from other metal

objects such as paper clips, coins, keys, nails, screws

or other small metal objects that can make a connection

from one terminal to another. Short-circuiting the battery

terminals together may result in burns or a re.

Do not expose cells or batteries to mechanical shock.

Never attempt to open the battery pack for any reason or

if the plastic housing of the battery pack breaks or cracks,

immediately discontinue use and do not recharge.

When possible, remove the battery from the appliance/

power tool/machine when not in use.

Do not leave a battery on prolonged charge when not in

use or stored for extended periods of time as this may

cause damage to the battery.

To facilitate cooling of the battery pack after use, avoid

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos VonHaus 3500192 Scie sabre. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter VonHaus. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre VonHaus 3500192 Scie sabre dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour VonHaus Scies sabres
Plus de modes d’emploi de Scies sabres

Foire aux questions sur VonHaus 3500192 Scie sabre

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

VonHaus 3500009 Scie sabre

Mode d’emploi

VonHaus 3500169 Scie sabre

Mode d’emploi

Parkside IAN 279052 Scie sabre

Mode d’emploi

Stayer SS 280 P Scie sabre

Mode d’emploi

DeWalt DCS382B Scie sabre

Mode d’emploi

Skil 4915 AA Scie sabre

Mode d’emploi

Parkside IAN 289750 Scie sabre

Mode d’emploi

DeWalt DCS387D1 Scie sabre

Catégories associées