Mode d’emploi Vonroc HT504AC Taille-haies

Mode d’emploi

6

EN

WWW.VONROC.COM

• Before using any power tool, check first for

damaged parts and if found do not use it before

the part or parts have been replaced with new

ones.

• If the power supply cord is damaged, it must

be replaced only by the manufacturer or by an

authorized service center to avoid risk.

• Do not use power tools when you are tired or

have been drinking alcohol.

• Do not force the appliance - let it work at the

rate for which it was intended.

• Do not overreach while working - you may lose

your balance.

• Never use this appliance without the blade

guard fitted. It must always remain fitted.

• Only use spare parts and attachments supplied

by VONROC. Use of attachments other than

those supplied or recommended by VONROC

will invalidate your guarantee and could be

dangerous.

• Only use this appliance for its intended purpose

trimming hedges and bushes.

• Check the hedges and bushes for foreign ob

-

jects, e.g. wire fences and hidden wiring.

• Use a residual current device with a tripping

current of 30 mA or less.

• Hold the hedge trimmer with both hands if two

handles are provided.

• The hedge trimmer is intended to be used by

the operator at ground level and not on ladders

or any other unstable support.

•

Before operating the hedge trimmer, the user

should make sure the locking device(s) of any

moving elements (e.g. the extended shaft and pi-

voting element), if any, are in the locked position.

Above all be carefull!

Danger!

a) Keep all parts of the body away from the blade.

Do not remove cut material or hold material to

be cut when blades are moving. Blades continue

to move after the switch is turned off. A moment

of inattention while operating the hedge trimmer

may result in serious personal injury.

b) Carry the hedge trimmer by the handle with the

blade stopped and taking care not to operate any

power switch. Proper carrying of the hedge trim-

mer will decrease the risk of inadvertent starting

and resultant personal injury from the blades.

c) When transporting or storing the hedge trimmer,

always fit the blade cover. Proper handling of the

hedge trimmer will decrease the risk of personal

injury from the blades.

d) When clearing jammed material or servicing the

unit, make sure all power switches are off and the

power cord is disconnected. Unexpected actua-

tion of the hedge trimmer while clearing jammed

material or servicing may result in serious perso-

nal injury.

e) Hold the hedge trimmer by insulated gripping

surfaces only, because the blade may contact

hidden wiring or its own cord. Blades contacting

a “live” wire may make exposed metal parts of the

hedge trimmer “live” and could give the operator

an electric shock.

f) Keep all power cords and cables away from cut-

ting area. Power cords or cables may be hidden in

hedges or bushes and can be accidentally cut by

the blade.

g) Do not use the hedge trimmer in bad weather

conditions, especially when there is a risk of

lightning. This decreases the risk of being struck

by lightning.

h) Inspect and maintain the trimmer regularly. Have

the trimmer repaired only by an authorised repai-

rer.

i) Keep your hands and feet away from the cutting

area at all times.

j) Always hold the trimmer at a safe distance from

the body.

k) Always wear protective goggles.

l) Always wear gloves.

m) Only use the trimmer in daylight.

n) Ensure the ventilation openings are clear of

debris at all times.

o) Ensure there are no people of animals within 5

metres of your trimming area.

2. MACHINE INFORMATION

Intended use

This hedge trimmer is only intended for cutting

branches from shrubs, bushes, ornamental plants

and hedges.

TECHNICAL SPECIFICATIONS

Model No. HT504AC

Rated voltage 230V~ 50Hz

Rated Power 550W

No load speed 1.700/min.

Cutting length 510mm

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Vonroc HT504AC Taille-haies. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Vonroc. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Vonroc HT504AC Taille-haies dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Vonroc Taille-haies
Plus de modes d’emploi de Taille-haies

Foire aux questions sur Vonroc HT504AC Taille-haies

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Vonroc S_HT501DC Taille-haies

Mode d’emploi

Vonroc HT503DC Taille-haies

Mode d’emploi

Vonroc S_HT503DC Taille-haies

Mode d’emploi

Vonroc S2_HT503DC Taille-haies

Mode d’emploi

Vonroc S3_HT503DC Taille-haies

Mode d’emploi

Vonroc HT501DC Taille-haies

Mode d’emploi

Parkside IAN 420421 Taille-haies

Mode d’emploi

Primaster PMESH 1000 Taille-haies

Catégories associées