Mode d’emploi Vonroc S_HT501DC Taille-haies

Mode d’emploi

6

EN

WWW.VONROC.COM

6) Service

a) Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

b)

Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

ADDITIONAL SAFETY WARNINGS FOR

HEDGE TRIMMER

• Keep the area you are working in clean and tidy.

• Always hold the trimmer properly. When opera-

ting us both hands.

• If you are using a means of support to raise

yourself off the ground, ensure that it is stable

and cannot topple over - do not overreach at

any time.

• Do not use power tools in the rain or wet en-

vironments. Do not use power tools where there

is a risk of fire or explosion - i.e. near flammable

liquids or gases.

• Do not allow children into the area where you

are working.

• Do not let children or other people touch power

tools.

• Do not leave the power tool unattended.

•

Store in a dry place well out of reach of children.

• Always use safety glasses and gloves. We also

recommend the use of ear protectors.

• Wear the right clothes - not loose fitting or je-

wellery and ensure garments cannot come into

contact with moving parts.

• If you have long hair, tie it back safely to avoid

tangling it in moving parts.

• Before using any power tool, check first for

damaged parts and if found do not use it before

the part or parts have been replaced with new

ones.

• Do not use power tools when you are tired or

have been drinking alcohol.

• Do not force the appliance - let it work at the

rate for which it was intended.

• Do not overreach while working - you may lose

your balance.

• Never use this appliance without the blade

guard fitted. It must always remain fitted.

• Only use spare parts and attachments supplied

by Vonroc. Use of attachments other than those

supplied or recommended by Vonroc will invali-

date your guarantee and could be dangerous.

• Only use this appliance for its intended purpose

trimming hedges and bushes.

Above all be carefull!

Danger!

• Keep all parts of the body away from the cut-

ting blade. Do not remove cut material or hold

material to be cut when blades are moving.

Make sure the switch is off when clearing

jammed material. A moment of inattention

while operating the hedge trimmer may result in

serious personal injury.

• Carry the hedge trimmer by the handle with the

cutting blade stopped. When transporting or

storing the hedge trimmer always fit the trans-

port protection sleeve. Proper handling of the

hedge trimmer will reduce possible injury from

the cutting blades.

• The cutting elements continue to move after the

motor is switch off.

• Inspect and maintain the trimmer regularly.

Have the trimmer repaired only by an authorised

repairer.

• Inspect the hedge or bushes for foreign objects

like wire fences

• Keep your hands and feet away from the cutting

area at all times.

• Always hold the trimmer at a safe distance from

the body.

• Always wear protective goggles.

• Always wear gloves.

• Only use the trimmer in daylight.

• Ensure the ventilation openings are clear of

debris at all times.

• Ensure there are no people of animals within 5

metres of your trimming area.

• Remove the plug from the power socket before

attempting any maintenance.

• After use the tool should be stored so that the

blade is not exposed.

• Hold the power tool by insulated gripping surfa-

ces only, because the cutter blade may contact

hidden wiring. Cutter blade contacting a “live”

wire may make exposed metal parts of the

power tool “live” and could give the operator an

electric shock.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Vonroc S_HT501DC Taille-haies. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Vonroc. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Vonroc S_HT501DC Taille-haies dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Vonroc Taille-haies
Plus de modes d’emploi de Taille-haies

Foire aux questions sur Vonroc S_HT501DC Taille-haies

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Vonroc HT503DC Taille-haies

Mode d’emploi

Vonroc S2_HT503DC Taille-haies

Mode d’emploi

Vonroc S3_HT503DC Taille-haies

Mode d’emploi

Vonroc HT501DC Taille-haies

Mode d’emploi

Vonroc HT504AC Taille-haies

Mode d’emploi

Vonroc S_HT503DC Taille-haies

Mode d’emploi

Stihl HSA 45 Taille-haies

Mode d’emploi

Echo HC-500 Taille-haies

Catégories associées