Mode d’emploi Waring Commercial MX1050XTX Blender

Mode d’emploi

2 3

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should

always be followed including the following:

1.

READ ALL INSTRUCTIONS.

2. To protect against risk of electrical shock, do not put appliance in

water or other liquid.

3. Always unplug from outlet prior to handling or cleaning.

4. This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they do not play with

the appliance.

5. Unplug from outlet when not in use, before putting on or taking off

parts, and before cleaning.

6. Avoid contact with moving parts.

7. Do not operate any appliance with a damaged cord or plug or

after the appliance malfunctions or is dropped or damaged in any

manner. Return appliance to the nearest authorized service facility

for examination, repair, or electrical or mechanical adjustment.

8. The use of attachments, including canning jars, not recommended

by the appliance manufacturer may cause hazards.

9. Do not use outdoors.

10. Do not let cord hang over edge of table or counter, or touch hot

surfaces.

11. Keep hands and utensils out of container while blending, to prevent

the possibility of severe personal injury and/or damage to the

blender. A rubber scraper may be used, but must be used only

when the blender is not running.

12. CAUTION: Blades are sharp. Handle carefully.

13. Always operate blender with lid in place.

14. When blending hot liquids, remove center piece of two-piece cover.

See hot blending instructions, page 6.

15. The use of ear protection is recommended during extended

operating periods.

16. Do not leave blender unattended while it is running.

17. See cleaning and sanitizing instructions, pages 6-8.

NOT FOR WATERJET CLEANING.

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS

• For your protection, this appliance is equipped with a 3-conductor cord set.

• 120 Volt units are supplied with a molded 3-prong grounding-type plug

(NEMA 5-15P) and should be used in combination with a properly connected

grounding-type outlet as shown in Figure A.

If a grounding-type outlet is not available, an adapter, as shown in Figure B,

may be used to enable a 2-slot wall outlet to be used with a 3-prong plug.*

As shown in Figure C, the adapter must be grounded by attaching its

grounding lug under the screw of the outlet cover plate.

CAUTION: Before using an adapter, it must be determined that the

outlet cover plate screw is properly grounded. If in doubt, consult a

licensed electrician.

Never use an adapter unless you are sure it is properly grounded.

*NOTE: Use of an adapter is not permitted in Canada and Europe.

Green/Yellow: Earth Ground. Blue: Neutral. Brown: Live.

NOTE: User-installed cord set plugs are not permitted in Europe.

MX1000XTX/MX1000XTP/MX1000XTS

MX1050XTX/MX1050XTP/MX1050XTS

MX1100XTX/MX1100XTP/MX1100XTS

BLENDER SPECIFICATIONS

• Capacity: 64 oz Working Capacity

(48 oz capacity – MX1000XTP, MX1050XTP, MX1100XTP)

• Switch Settings: (2 speeds) Hi Low Pulse

• Speed (RPMs) 30,000 26,000 30,000

• Rating: 120 Volts - 13.0 Amps

• Base Material: Polycarbonate

• Bearing: High Precision Ball Bearing

• Cord: 6-Foot Three-Conductor Ground Cord with Strain Relief in Base

• Overall Height: 19 Inches

• Weight: 15 lbs

•

C

ETL

US

, NSF listed

• Operating Cycle: 1 min. ON/3 min. OFF

• MX1100XT – 30-Second Countdown Timer

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Waring Commercial MX1050XTX Blender. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Waring Commercial. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Waring Commercial MX1050XTX Blender dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Waring Commercial Blenders
Plus de modes d’emploi de Blenders

Foire aux questions sur Waring Commercial MX1050XTX Blender

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Waring Commercial BB300 Blender

Mode d’emploi

Waring Commercial TBB145 Blender

Mode d’emploi

Waring Commercial BB320 Blender

Mode d’emploi

Waring Commercial MX1100XTS Blender

Mode d’emploi

Waring Commercial TBB175 Blender

Mode d’emploi

Waring Commercial MX1200XTP Blender

Mode d’emploi

Waring Commercial MX1500XTS Blender

Mode d’emploi

Waring Commercial MMB150E/K Blender

Catégories associées