Mode d’emploi Worx WX291L.9 Visseuse

Mode d’emploi

20V Cordless Impact Driver EN

4

use of tools allow you to become

complacent and ignore tool safety

principles. A careless action can cause severe

injury within a fraction of a second.

4) Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or remove the battery pack,

if detachable, from the power tool before

making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools and accessories.

Check for misalignment or binding of

moving parts, breakage of parts and any

other condition that may affect the power

tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended could

result in a hazardous situation.

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow

for safe handling and control of the tool in

unexpected situations.

5) Battery tool use and care

a) Recharge only with the charger specified

by the manufacturer. A charger that is suitable

for one type of battery pack may create a risk of

fire when used with another battery pack.

b) Use power tools only with specifically

designated battery packs. Use of any other

battery packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects, that can make a

connection from one terminal to another.

Shorting the battery terminals together may

cause burns or a fire.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

e) Do not use a battery pack or tool that is

damaged or modified. Damaged or modified

batteries may exhibit unpredictable behavior

resulting in fire, explosion or risk of injury.

f) Do not expose a battery pack or tool to

fire or excessive temperature. Exposure to

fire or temperature above 270 °F (130 °C) may

cause explosion.

g) Follow all charging instructions and do not

charge the battery pack or tool outside

the temperature range specified in the

instructions. Charging improperly or at

temperatures outside the specified range may

damage the battery and increase the risk of fire.

6) Service

a) Have your power tool serviced by a

qualified repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

b) Never service damaged battery packs.

Service of battery packs should only be

performed by the manufacturer or authorized

service providers.

SCREWDRIVER SAFETY

WARNING

1. Hold the power tool by insulated gripping

surfaces, when performing an operation

where the fastener may contact hidden

wiring. Fasteners contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

SAFETY WARNINGS FOR

BATTERY PACK

a) Do not dismantle, open or shred battery

pack.

b) Do not expose battery pack to heat or fire.

Avoid storage in direct sunlight.

c) Do not short-circuit a battery pack. Do not

store battery packs haphazardly in a box or

drawer where they may short-circuit each

other or be short-circuited by other metal

objects. When battery pack is not in use, keep it

away from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal to another. Shorting the battery terminals

together may cause burns or fire.

d) Do not remove battery pack from its original

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Worx WX291L.9 Visseuse. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Worx. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Worx WX291L.9 Visseuse dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Worx Visseuses
Plus de modes d’emploi de Visseuses

Foire aux questions sur Worx WX291L.9 Visseuse

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Worx WX240L Visseuse

Mode d’emploi

Worx WX253 SD Visseuse

Mode d’emploi

Worx WX254.6 Visseuse

Mode d’emploi

Worx WX255L Visseuse

Mode d’emploi

Worx WX261L Visseuse

Mode d’emploi

Worx WX261L.9 Visseuse

Mode d’emploi

Worx WX251 Visseuse

Mode d’emploi

Worx WX252L Visseuse

Catégories associées