Mode d’emploi Worx WX516L Scie sabre

Mode d’emploi

Cordless Reciprocating Saw EN

3

PRODUCT SAFETY

WARNING: Some dust created by power sanding,

sawing, grinding, drilling and other construction

activities contains chemicals known to the State

of California to cause cancer, birth defects or other

reproductive harm. Some examples of these chemicals

are:

• Lead from lead-based paints;

• Crystalline silica from bricks and cement and other

masonry products;

• Arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending on how

often you do this type of work. To reduce your exposure

to these chemicals: work in a well ventilated area, and

work with approved safety equipment, such as those

dust masks that are specially designed to filter out

microscopic particles.

WARNING: This product can expose you to

chemicals including lead and Di (2-ethylhexyl)

phthalate (DEHP) which are known to the State of

California to cause cancer and birth defects or other

reproductive harm. For more information go to www.

P65Warnings.ca.gov.

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING: Read all safety warnings,

instructions, illustrations and specifications

provided with this power tool.

Failure to follow all

instructions listed below may result in electric shock, fire

and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

1 WORK AREA SAFETY

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust.

Power tools

create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can cause

you to lose control.

2 ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools.

Unmodified plugs and matching outlets will

reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions.

Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power

tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply.

Use of an RCD reduces

the risk of electric shock.

3 PERSONAL SAFETY

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication.

A

moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection.

Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool.

Carrying power tools with

your finger on the switch or energising power tools

that have the switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on.

A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times.

This enables better control of

the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts.

Loose clothes, jewellery or

long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of

dust collection can reduce dust-related hazards.

h) Do not let familiarity gained from frequent

use of tools allow you to become complacent

and ignore tool safety principles.

A careless

action can cause severe injury within a fraction of a

second.

4 POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct

power tool for your application.

The correct

power tool will do the job better and safer at the rate

for which it was designed.

b) Do not use the power tool if the switch does not

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Worx WX516L Scie sabre. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Worx. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Worx WX516L Scie sabre dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Worx Scies sabres
Plus de modes d’emploi de Scies sabres

Foire aux questions sur Worx WX516L Scie sabre

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Worx WG894E Scie sabre

Mode d’emploi

Worx WX80RS Scie sabre

Mode d’emploi

Worx WX516L.9 Scie sabre

Mode d’emploi

Worx WX550L Scie sabre

Mode d’emploi

Worx WX550L.9 Scie sabre

Mode d’emploi

Worx WG894E.5 Scie sabre

Mode d’emploi

Worx WG894E.9 Scie sabre

Mode d’emploi

Narex EPO 150 Scie sabre

Catégories associées