Document shredder IPS080D
Version 05/11
Item no. 88 34 85
Intended use1.
This product is designed for shredding paper, CDs and credit cards. The separate collection container allows
the separation of shredded CDs from shredded paper and credit cards. Power is supplied via a standard mains
socket (230 V/AC, 50 Hz). The product should only be used in dry indoor areas.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
causehazardssuchasshortcircuiting,re,electricshocketc.Readtheinstructionscarefullyandkeepthem.
Make this product available to third parties only together with its operating instructions.
Delivery content 2.
Document shredder•
Operating instructions•
Safety instructions3.
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
Persons / Product
Do not reach into the feeder slot.•
Do not insert paper pin, staples or any other metal parts into the feeder slot. •
Keep long hair away from around the feeder slot. •
Keep ties, scarves, loose clothing and long necklaces or bracelets away from the feeder slot.•
Do not use spray bottles / cans in the immediate vicinity of the product.•
The device is not a toy. Keep it out of the reach of children and pets.•
Do not leave packaging material lying around carelessly. These may become dangerous playing material •
for children.
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, •
ammablegases,vapoursandsolvents.
Do not place the product under any mechanical stress.•
If it is no longer possible to operate the product safely, take it out of operation and protect it from any •
accidental use. Safe operation can no longer be guaranteed if the product:
is visibly damaged, -
is no longer working properly, -
has been stored for extended periods in poor ambient conditions or -
has been subjected to any serious transport-related stresses. -
Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the •
product.
Unplug the mains plug from the mains outlet before cleaning the product or storing it for a longer period.•
Do not operate the device for longer than two minutes to avoid overheating the motor.•
The product should not be connected immediately after it has been brought from an area of cold •
temperature to an area of warm temperature. Condensed water might destroy the product. Wait until the
product stabilising to adapt to the new ambient temperature before use.
Miscellaneous
Consult an expert when in doubt about operation, safety or connection of the device.•
Maintenance,modications and repairs aretobe performed exclusively byan expert or at aqualied•
shop.
Ifyouhavequestionswhichremainunansweredbytheseoperatinginstructions,contactour technical•
support service or other technical personnel.
Operating elements4.
Selector switch 1.
CD/credit card insertion slot2.
Paper insertion slot3.
Operation5.
Place the shredder on a level surface.1.
Plug the mains plug into a mains socket.2.
Shredding paper
Do not insert more than 8 sheets of paper (size DIN A4 with a maximum grammage of •
80 g/m
2
) into the insertion slot.
Do not shred adhesive notes or paper with remains of adhesive.•
Slide the selector switch to the left into the “AUTO” position.1.
Now, carefully insert the paper into the insertion slot. The paper will automatically be fed in and shredded.2.
Whennished,slidetheselectorswitchtothecentralposition“OFF”.3.
Shredding CDs / credit cards
Shred only one CD / credit card at a time.
Attachthesmallcollectioncontainerontotheretainingxturewithinthecollectioncontainer.1.
Slide the selector switch to the right, into the “CD/Card REV” position. The motor is now permanently 2.
turned on.
Next, carefully insert a single CD / credit card into the CD / credit card insertion slot. The CD / credit card 3.
will be fed in and shredded.
Whennished,slidetheselectorswitchtothecentralposition,“OFF”.4.
Clearing paper jams
Slide the selector switch to the right, into the “CD/Card REV” position.1.
The cutting unit will now run in the reverse direction and push the jammed paper out again.2.
Whennished,slidetheselectorswitchtothecentralposition,“OFF”.3.
Troubleshooting6.
Problem Cause Solution
The cutting unit continuously
keeps on running in the “AUTO”
position.
The paper container is full and
the paper from the cutting unit
cannot feed through.
Unplug the mains plug and empty
the container.
After shredding, there are still
pieces of paper remaining in the
cutting unit.
The remaining pieces of paper
are stuck between blades.
Slide the selector switch into the
“CD/Card REV” position.
The automatic feed stops,
however there is still paper in the
insertion slot.
The paper was inserted into the
insertion slot at an angle.
Ensure the paper is straight as it
goes into the insertion slot.
The paper is too soft, thin, damp
or creased.
Fold,dryorattenthepaper.
The device does not work,
although no pieces of paper
remain in the feeder.
The motor is overheated.
Leave the device to cool down
before putting it into operation
again.
Disposal7.
Inordertopreserve,protectandimprovethequalityofenvironment,protecthumanhealthand
utilise natural resources prudently and rationally, the user should return unserviceable product to
relevant facilities in accordance with statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed separately and not as
municipal waste.
Technical data8.
Operating voltage: 230 V/AC, 50 Hz
Power consumption: max. 1.5 A
Safety level: 3 (DIN 32757)
Noise level: 72 dB
Shredding speed: 2 m/min
Container volume: 15 l (paper)
0.8 l (CD/credit card)
Operating temperature: -10 to +85 ºC
Blade clearance: 4 mm (paper)
40 mm (CD/credit card)
Insertion slot width: 220 mm (paper)
123 mm (CD/credit card)
Cable length: 1.2 m
Dimensions (W x H x D): 315 x 320 x 195 mm
Weight: 3.4 kg
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
All rights including translation reserved. Reproduction by any method, e.g.
photocopy,microlming,orthecaptureinelectronicdataprocessingsystems
requirethepriorwrittenapprovalbytheeditor.Reprinting,alsoinpart,isprohibited.
Theoperatinginstructionsreectthecurrenttechnicalspecicationsattimeofprint.
Wereservetherighttochangethetechnicalorphysicalspecications.
© 2011 by Conrad Electronic SE.
V1_0511_02-SB
Joignez-vous à la conversation sur ce produit
Ici, vous pouvez partager ce que vous pensez du Conrad IPS080D Destructeur. Si vous avez une question, lisez d’abord attentivement le mode d’emploi. La demande d’un mode d’emploi peut être effectuée en utilisant notre formulaire de contact.