Mode d’emploi Alpina SF 4003 Friteuse

Besoin d'un mode d’emploi pour votre Alpina SF 4003 Friteuse ? Ci-dessous, vous pouvez consulter et télécharger gratuitement le mode d’emploi PDF en français. Ce produit a actuellement 3 questions fréquemment posées, 0 commentaires et a 1 vote avec une note moyenne du produit de 0/100. Si ce n'est pas le mode d’emploi que vous souhaitez, veuillez nous contacter.

Votre produit est défectueux et le mode d’emploi n’offre aucune solution ? Rendez-vous à un Repair Café pour obtenir des services de réparation gratuits.

Mode d’emploi

Loading…

2
ENGLISH
Dear Customer,
Thank you for choosing this ALPINA home appliance. Your Alpina appliance comes with a 2 year warranty and will provide years of
service if looked after properly. The ALPINA name brings you Quality, Reliability and Dependability. We hope you will continue to
make ALPINA your first choice in home appliances
.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should be followed:
1. Read all instructions carefully.
2. Make sure the power supply corresponds to one on the rating label.
3. To avoid electrical shock, do not immerse electrical parts in water or other liquid.
4. Do not allow children to operate or play with the appliance.
5. Unplug from outlet when not in use, or before putting on/taking off parts.
6. Do not use with damaged electrical cord or plug.
7. If damaged or malfunction occurs, refer to an authorized service center only.
8. Do not place on or near hot surfaces.
9. Never pull the appliance by the power cord.
10. Do not use the appliance for other than intended household use.
HOW TO OPERATE
Before first use:
The Basket and the Oil Tank should be cleaned before first use: Take the basket from inside the oil tank and lift the electrical unit out
vertically. Wash the oil tank and the basket with detergent and water. Rinse and dry them.
Warning: Never wet the electrical unit.
Refit all the components.
Fill the oil tank with oil or liquid fat to levels between the minimum and maximum level marks on the inside wall of the oil
tank.
Using fresh solid frying fat:
1. Melt the fat in a saucepan over a low heat.
2. Warning: Supervise at all times and keep out of the reach of children.
3. Switch power off as soon as the fat is melted. Place the deep-fryer in the sink and carefully pour the melted fat into the oil tank.
4. Carefully carry the deep-fryer to the place where it is to be used.
Using solid fat which has hardened in the fryer:
1. Make holes in the fat first. Warning: Take care not to damage the element.
2. Close the fryer cover to prevent spitting and set the temperature control to 160°C. The temperature can be further increased
once the fat has melted. Warning: Do not use other melting procedures.
3. Place the basket handle vertically and press the two buttons at the same time to fit it into the basket openings, pressing it
down until correctly in position.
4. Plug in and turn the temperature control to the required setting, depending on the food to be fried.
5. Close the lid, turn on the Power ON/OFF switch and heat-up the oil/fat. The ON/OFF switch light and temperature control light
will come on. When the oil/fat has reached the temperature selected, the temperature control light goes out. It will continue
to come on and go off according to the thermostat cycles, during the whole frying time.
6. With the basket outside the deep-fryer, add the food to be fried. Warning: Do not fill to more than three-quarters.
7. Open the lid, place the basket gently into the oil by hooking the basket at the lower position, and ensure that the
oil/fat have reached to the required temperature.
Warning: 1). Ensure the food is covered by oil.
2). Keep the lid open during frying to avoid overflowing and over frying.
8. When food is placed in the appliance, this will cool the oil and the temperature control light will turn on.
9. Once the food is fried, lift the basket and hook the basket at the upper position to drain the oil thoroughly.
10. Take the basket off the deep-fryer and turn out the food.
11. When not in use, set the ON/OFF switch to OFF. Even though the switch is turned off, the power supply will be disconnected
only when the appliance is unpluged. It is highly recommended to unplug the appliance after finish using.
Warning:
This appliance is equipped with a grounded, Type G, 3-pin power supply cord. This is a safety feature. Do not attempt to defeat the
safety purpose of this plug.
MAINTENANCE AND CLEANING
1. Before cleaning the appliance, unplug it and wait for it to cool down completely.
2. Remove the electrical unit.
3. Warning: Never submerge the electrical unit into water or wash it under the tap. Clean it with a damp-dry cloth.
Télécharger mode d’emploi en Français (PDF, 0.52 MB)
(Tenez compte de l’environnement et imprimez ce manuel uniquement si c’est vraiment nécessaire)

Loading…

Évaluation

Dites-nous ce que vous pensez du Alpina SF 4003 Friteuse en laissant une note de produit. Vous voulez partager vos expériences avec ce produit ou poser une question ? Veuillez laisser un commentaire au bas de la page.
Etes-vous satisfait du Alpina SF 4003 Friteuse ?
Oui Non
0%
100%
1 évaluation

Joignez-vous à la conversation sur ce produit

Ici, vous pouvez partager ce que vous pensez du Alpina SF 4003 Friteuse. Si vous avez une question, lisez d’abord attentivement le mode d’emploi. La demande d’un mode d’emploi peut être effectuée en utilisant notre formulaire de contact.

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Alpina SF 4003 Friteuse. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Alpina. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Alpina SF 4003 Friteuse dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Marque Alpina
Modèle SF 4003
Catégorie Friteuses
Type de fichier PDF
Taille du fichier 0.52 MB

Tous les modes d’emploi pour Alpina Friteuses
Plus de modes d’emploi de Friteuses

Foire aux questions sur Alpina SF 4003 Friteuse

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

À quelle fréquence dois-je remplacer la graisse ou d'huile dans ma friteuse ? Vérifié

Pour obtenir un résultat optimal, il est conseillé de remplacer la graisse ou l'huile toutes les 8 sessions de friture, si vous faites des collations. Si vous faites des frites, la graisse ou l'huile peut être remplacée tous les 12 sessions de friture.

Cela a été utile (1008) En savoir plus

Puis-je nettoyer l’intérieur de ma friteuse avec un récureur ? Vérifié

Non. La plupart des friteuses ont une couche spéciale qui peut être endommagée par l’utilisation d’un récureur ou d’un nettoyant abrasif. N’utilisez que le côté doux d’une lavette ou d’une lingette humide.

Cela a été utile (409) En savoir plus

Qu’est-ce que la « zone froide » dans ma friteuse ? Vérifié

Dans les friteuses à zone froide, une partie de l’huile se trouve sous l’élément chauffant. Cette partie de l’huile reste plus froide que la partie supérieure. Les miettes flotteront jusqu’au fond et finiront dans cette zone froide, en s’assurant que l’huile reste propre plus longtemps.

Cela a été utile (390) En savoir plus
Mode d’emploi Alpina SF 4003 Friteuse

Produits connexes

Catégories associées