Mode d’emploi Black and Decker KS700PE Scie sauteuse

Mode d’emploi

6

ENGLISH

Features

This tool includes some or all of the following features:

1. On/off switch

2. Lock-on button

3. Dust extraction outlet

4. Shoe plate

5. Saw blade support roller

6. Pendulum stroke selector

Fig. C

7. Saw blade storage compartment (KS702PE & KS703PE)

Assembly

Warning! Before attempting any of the following operations,

make sure that the tool is switched off and unplugged and that

the saw blade has stopped. Used saw blades may be hot.

Fittingandremovingthesawblade(g.A)

u Loosen (do not remove) the two screws (11).

u Hold the saw blade (8) with the teeth facing forward.

u Insert the shank of the saw blade (8) into the blade holder

(10) as far as it will go.

u Slightly tighten the two screws (11) alternately to position

the blade, then fully tighten the two screws (11).

u To remove the saw blade (8), turn both screws (11) one

turn counter-clockwise.

Connectingavacuumcleanertothetool(g.B)

An adaptor (12) is required to connect a vacuum cleaner or

dust extractor to the tool. The adaptor can be purchased from

your local Black & Decker retailer.

u Push the adaptor (12) into the dust extraction outlet (3).

u Connect the vacuum cleaner hose (13) to the adaptor (12).

Sawbladestorage(KS702PE&KS703PEonly)(g.C)

Saw blades (8) can be stored in the storage compartment (7)

located on the side of the tool

u Open the cover of the saw blade storage compartment (7)

by holding the tab on the top of the door and pulling outwards.

u Remove or store saw blades (8) in the storage

compartment. (7).

u Close the cover of the saw blade storage compartment (7)

and make sure that it is latched closed.

Cutlineblower(g.D)

u To aid visibility when cutting, your jigsaw is equipped with

a cut line blower (14) which will keep the work area clear

of dust as you saw.

Residual risks.

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

u Injuries caused by touching any rotating/moving

parts.

u Injuries caused when changing any parts, blades or

accessories.

u Injuries caused by prolonged use of a tool. When

using any tool for prolonged periods ensure you take

regular breaks.

u Impairment of hearing.

u Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF.)

Use

Adjustingtheshoeplateforbevelcuts(g.E)

The shoe plate (4) can be set to make either a straight cut or a

left or right bevel cut at an angle of 45°.

u Loosen the screws (9).

u Pull the shoe plate (4) forward, rotate the shoe plate (4) to

the left or right and push it back into the 45° location.

u Tighten the screws (9).

To reset the shoe plate for straight cuts:

u Loosen the screws (9).

u Pull the shoe plate (4) forward, rotate to the centre and

push it back into the 0° location.

u Tighten the screws (9).

Setting the pendulum stroke (g. F)

u Set the pendulum stroke selector (6) to the required

position.

- Position 0: metal and aluminium and sheet metal.

- Position I: for laminates, hard wood, work tops.

- Position II: for plywood and PVC/plastics.

- Position III: for soft wood and fast cutting.

Variable speed control

The tool has a variable speed on/off switch (1). The operating

speed depends on how far you press the switch.

u Use a high speed for wood, medium speed for aluminium

and PVC and low speed for metals other than aluminium.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Black and Decker KS700PE Scie sauteuse. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Black and Decker. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Black and Decker KS700PE Scie sauteuse dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Black and Decker Scies sauteuses
Plus de modes d’emploi de Scies sauteuses

Foire aux questions sur Black and Decker KS700PE Scie sauteuse

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Black and Decker KS602E Scie sauteuse

Mode d’emploi

Black and Decker KS633 Scie sauteuse

Mode d’emploi

Black and Decker KS2005EK Scie sauteuse

Mode d’emploi

Black and Decker KS900EL Scie sauteuse

Mode d’emploi

Black and Decker KS632E Scie sauteuse

Mode d’emploi

Black and Decker KS701PEK Scie sauteuse

Mode d’emploi

Black and Decker KS900E Scie sauteuse

Mode d’emploi

Black and Decker KS900SW Scie sauteuse

Catégories associées