Mode d’emploi DeWalt D25652K Perforateur

Mode d’emploi

ENGLISH

6

Electronic Speed and Impact Control

(Fig. E)

The electronic speed and impact control allows the

use of smaller drill bits without the risk of bit breakage,

hammerdrilling into light and brittle materials without

shattering and optimal tool control for precisechipping.

To set the control dial, turn the dial

7

to the desired level.

The higher the number, the greater the speed and impact

energy. Dial settings make the tool extremely adaptable for

many different appli cations. The required setting depends

on the bit size and hardness of material beingdrilled.

Mode Selector (Fig. A)

NOTICE: Never change the mode while the unit is

running. Tool must come to a complete stop before

activating the mode selector button or damage to the

tool mayresult.



CAUTION: Do not change to hammerdrill mode with

chisel bit in tool holder. Personal injury and damage

to tool mayresult.

The D25604 and D25652 use two operating modes. To

select the required operating mode, rotate the mode

selector

6

until the arrow points to the hammerdrilling or

the chipping icon. The D25831 and D25851 use only the

chippingmode.

Rotary Hammering Mode ( )

D25604, D25652

The tool simultaneously rotates and impacts the

work. This mode is appropriate for all concrete and

masonryoperations.

Chipping Mode ( )

D25831, D25851

The spindle lock is engaged during chipping mode

so the tool impacts the work without rotating. This

mode is appropriate for light chipping, chiseling and

demolitionapplications.

NOTE: In chipping mode, the hammerdrill can also be used

as a lever to free a jammed drillbit.

Chisel Bit adjustment ( )

D25604, D25652, D25831, D25851

Turn the mode selector to one of the chisel bit adjustment

icons to adjust the chisel to the desired position. There are

multiple positions to set the angle of the chisel. After finding

the desired position, slightly maneuver the chisel bit back

and forth to ensure the chisel is properlyengaged.

Indicator Lights (Fig. A, E)

The yellow brush wear indicator LED

10

 lights up when

the carbon brushes are nearly worn out indicating that the

tool needs servicing within the next 8 hours ofuse.

The red indicator LED

9

 lights up if the lock-on slider

2

and/or E-Clutch® System is engaged in any mode except

the chippingmode.

The red indicator LED

9

 starts to flash if there is a fault with

the tool or the brushes have completely worn out (refer to

Repairs underMaintenance).

INDICATOR DIAGNOSIS SOLUTION

OFF Tool is functioning

normally

Follow all

warnings and

instructions when

operating tool

SOLID Perform and protect

control has been

activated

With tool properly

supported, release

trigger; the tool

will function

normally when

the trigger is

depressed again

and the indicator

light will go out

FLASHING Perform and

protect control is

malfunctioning

Take the tool to

an authorized

DeWALT

repairagent.

NOTE: If the tool power is insufficient for normal

hammering and if the LED does not flash repeatedly after

cycling the trigger, take the tool to an authorized D

e

WALT

repaircenter.

OPERATION



WARNING: To reduce the risk of serious personal

injury, turn unit off and disconnect it from

power source before making any adjustments or

removing/installing attachments or accessories.

An accidental start-up can causeinjury.



WARNING: To reduce the risk of personal injury,

ALWAYS ensure workpiece is anchored or

clamped firmly. If hammerdrilling thin material,

use a wood “back-up” block to prevent damage to

thematerial.



WARNING: To reduce the risk of personal injury,

ALWAYS operate the tool with the side handle

properly installed and securely tightened. Failure

to do so may result in the side handle slipping during

tool operation and subsequent loss of control. Hold

tool with both hands to maximizecontrol.



WARNING: Drill may stall if overloaded causing a

sudden twist. Always expect the stall. Grip the drill

firmly with both hands to control the twisting action

and avoidinjury.

NOTE: Operating temperature of this tool is 19 ˚F to 104 ˚F

(-7 ˚C to +40 ˚C). Using the tool outside of this temperature

range will decrease the life of thetool.

Proper Hand Position (Fig. F)



WARNING: To reduce the risk of serious personal injury,

ALWAYS use proper hand position as shown.



WARNING: To reduce the risk of serious personal

injury, ALWAYS hold securely in anticipation of a

suddenreaction.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos DeWalt D25652K Perforateur. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter DeWalt. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre DeWalt D25652K Perforateur dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour DeWalt Perforateurs
Plus de modes d’emploi de Perforateurs

Foire aux questions sur DeWalt D25652K Perforateur

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

DeWalt D25870 Perforateur

Mode d’emploi

DeWalt DCH293R2 Perforateur

Mode d’emploi

DeWalt D25481K Perforateur

Mode d’emploi

DeWalt D25723 Perforateur

Mode d’emploi

DeWalt D25711 Perforateur

Mode d’emploi

DeWalt D25810K Perforateur

Mode d’emploi

DeWalt D25831 Perforateur

Mode d’emploi

DeWalt D25600 Perforateur

Catégories associées