Mode d’emploi Fellowes Helios 30 Thermal Relieuse

Besoin d'un mode d’emploi pour votre Fellowes Helios 30 Thermal Relieuse ? Ci-dessous, vous pouvez consulter et télécharger gratuitement le mode d’emploi PDF en français. Ce produit a actuellement 0 questions fréquemment posées, 0 commentaires et a 4 votes avec une note moyenne du produit de 75/100. Si ce n'est pas le mode d’emploi que vous souhaitez, veuillez nous contacter.

Votre produit est défectueux et le mode d’emploi n’offre aucune solution ? Rendez-vous à un Repair Café pour obtenir des services de réparation gratuits.

Mode d’emploi

Loading…

Switch the power on (located at the rear side).
The ‘Power-On’ LED will be red. To activate the ma-
chine, press the ‘Power-On’ button on the control panel.
The machine will warm-up, the red LED will flash. The
machine will ‘beep’ (3x) and the LED turns green when
the machine is ready to bind.
Prepare the documents by loading the sheets into the
thermal covers. For best results, do not to place too
many or too few sheets into the cover. Use the binding
thickness scale as a guide. The guide is calibrated in
6mm widths. Helios 30 will accept single or multiple
documents up to a combined total thickness of 30mm
(approximately 300 sheets / 80gsm).
The selected binding cycle is shown by a blue LED. Use
the timer selection buttons to navigate up or down the
scale, if required. The scale has 10 settings. Eg: 6mm
document thickness = setting 1 (up to 60 sheets),
30mm document = setting 10 (up to 300 sheets).
Pull open the document clamp (Heat-Shield feature),
insert the documents into the binding channel. Ensure
the binding covers spine touches the heating element.
Start the binding cycle by pressing the ‘Select / OK’ but-
ton. The blue LED will start flashing and counting down,
in sequence. When the cycle is complete, the machine
will beep (3x). The blue LED will switch off.
The machine has an integral cooling tray. It can be
extended from the back of the machine and can also be
pulled upwards to accept larger documents.
When the binding cycle is complete, immediately
remove the documents and place in the cooling tray
or on a flat surface to allow the document to cool. The
document can be removed from the machine mid-cycle
if required, take care – the glue may be hot and
melted.
5.
6.
7.
8.
9.
10.
11.
HOW TO BIND
6
Let our experts help you with a solution.
Customer Service...
www.fellowes.com
Always call Fellowes before contacting your place of purchase,
see the rear cover for contact details.
NEED HELP?
Ensure the machine is on a stable surface. Check there
is enough clear space around the machine to operate
safely.
Insert the power lead into the power socket (located at
the rear of the machine).
Plug the machine into an easily accessible mains socket.
Switch the mains supply on.
Open and lift the lid by releasing the safety catches on
the front of the lid.
1.
2.
3.
4.
BEFORE BINDING
12.
Télécharger mode d’emploi en Français (PDF, 1.58 MB)
(Tenez compte de l’environnement et imprimez ce manuel uniquement si c’est vraiment nécessaire)

Loading…

Évaluation

Dites-nous ce que vous pensez du Fellowes Helios 30 Thermal Relieuse en laissant une note de produit. Vous voulez partager vos expériences avec ce produit ou poser une question ? Veuillez laisser un commentaire au bas de la page.
Etes-vous satisfait du Fellowes Helios 30 Thermal Relieuse ?
Oui Non
75%
25%
4 évaluations

Joignez-vous à la conversation sur ce produit

Ici, vous pouvez partager ce que vous pensez du Fellowes Helios 30 Thermal Relieuse. Si vous avez une question, lisez d’abord attentivement le mode d’emploi. La demande d’un mode d’emploi peut être effectuée en utilisant notre formulaire de contact.

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Fellowes Helios 30 Thermal Relieuse. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Fellowes. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Fellowes Helios 30 Thermal Relieuse dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Marque Fellowes
Modèle Helios 30 Thermal
Catégorie Relieuses
Type de fichier PDF
Taille du fichier 1.58 MB

Tous les modes d’emploi pour Fellowes Relieuses
Plus de modes d’emploi de Relieuses

Mode d’emploi Fellowes Helios 30 Thermal Relieuse

Produits connexes

Catégories associées

×
Download