Mode d’emploi FERM GRM1022 Nettoyeur haute pression

Mode d’emploi

4

EN

type for outdoor use and marked accordingly.

Extension cables must be threecore, one of

which is EARTH.

Immediately switch off the machine when:

• Interruption of the mains plug, mains lead or

mains lead damage.

• Defect switch

• Smoke or stench of scorched isolation

Specific safety rules

The USE and MAINTENANCE manual constitutes

an essential part of the cleaner equipment and

should be kept in a safe place for future reference.

If you sell the cleaner, the manual should be

handed on to the new owner.

• Before starting the cleaner, make sure that

it is receiving water correctly. Operating the

cleaner without water could damage the seals.

• Do not disconnect the plug by pulling on the

electrical cable.

• If you are too far from the object you wish

to clean, do not move the cleaner nearer by

pulling on the high pressure hose; use the

handle provided.

• In versions not equipped with TSS device,

do not operate the cleaner for more than 1-2

minutes with the gun closed as this could

damage the seals.

• Protect the cleaner from freezing during the

winter.

• Do not obstruct the ventilation grilles during

operation.

• The cross-section of any extension cables

used must be proportional to their length, i.e.

the longer the extension cable, the greater the

cross-section; cables with a protection level of

“IPX5” must be used.

• Position the cleaner AS NEAR POSSIBLE to

the water supply.

• The packaging is easily recyclable, and must be

disposed of in compliance with the regulations

in force in the country of installation.

• Use the cleaner only with accessories

and replacement parts authorized by the

manufacturer. The use of original accessories

and replacement parts will ensure safe,

trouble-free operation.

• The cleaner must be used standing on a

secure, stable surface.

• Avoid unintentional firing of the trigger. Do not

carry the lance/ trigger assembly with your

hand over the trigger. Always use the trigger

lock mechanism.

•

Ensure that the safety lock on the trigger is used,

when you have stopped using the pressure

washer to prevent accidental operation.

• Read all the instructions before using the

machine.

• Machines shall not be used by children.

Children should be supervised to ensure

that they do not play with the machine. This

machine is not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge

• The electrical supply connection shall be made

by a qualified person and comply with IEC

60364-1. The electric supply to this machine

should include either a residual current device

that will interrupt the supply if the leakage

current to earth exceeds 30 mA for 30 ms or a

device that will prove the earth circuit.

• The machine is intended to be used at

a temperature above o degree. (Only for

machine with power cord of H05VV-F).

• The operating method to be followed in the

event of accident (e.g. contact with detergents:

rinse with an abundance of clean water) or

breakdown to prevent unsafe situations.

• This machine has been designed for use with

the cleaning agent supplied or recommended

by the manufacturer. The use of other cleaning

agents or chemicals may adversely affect the

safety of the machine.

• Recommend the operator to wear ear

protectors.

• Do not use the machine within range of

persons unless they wear protective clothing.

• Do not direct the jet against yourself or others

in order to clean clothes or foot-wear.

•

Risk of explosion-Do not spray flammable liquids.

• High pressure hoses, fittings and couplings

are important for the safety of the machine.

Use only hosed, fittings and couplings

recommended by the manufacturer.

• To ensure machine safety, use only original

spare parts from the manufacturer or approved

by the manufacturer.

• Water that has flown through backflow

preventers is considered to the non-potable.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos FERM GRM1022 Nettoyeur haute pression. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter FERM. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre FERM GRM1022 Nettoyeur haute pression dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour FERM Nettoyeurs haute pression
Plus de modes d’emploi de Nettoyeurs haute pression

Foire aux questions sur FERM GRM1022 Nettoyeur haute pression

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

FERM GRM1026 Nettoyeur haute pression

Mode d’emploi

FERM GRM1003 Nettoyeur haute pression

Mode d’emploi

FERM GRM1023 Nettoyeur haute pression

Mode d’emploi

FERM GRM1008 Nettoyeur haute pression

Mode d’emploi

FERM GRM1007 Nettoyeur haute pression

Mode d’emploi

FERM GRM1005 Nettoyeur haute pression

Mode d’emploi

FERM GRM1006 Nettoyeur haute pression

Mode d’emploi

FERM GRM1002 Nettoyeur haute pression

Catégories associées