Mode d’emploi FERM GRM1022 Nettoyeur haute pression

Mode d’emploi

6

EN

from the freezing current.

• This machine has been designed for only

using cleaning water, do not use corrosive

chemicals.

• Use cleaning agent supplied or recommend by

the manufacturer.

• High-pressure jets can be dangerous if subject

to misuse. The jet must not be directed at

persons, animals, live electrical equipment or

the machine itself. Pressure washers should

not be pointed at tire walls, as it may be

possible to damage them.

• Do not direct the jet against yourself or others

in order to clean clothes or footwear.

• Disconnect from the electrical power supply

before carrying out user maintenance.

•

If the mains cable is damaged it must be

replaced by the manufacturer, or its service agent

or similarly qualified person to avoid a hazard.

• Do not use the machine if a supply cord or

important parts are damaged, e.g. safety

devices, high pressure hoses, trigger gun.

• Be aware of the recoil caused by the water jet

when the machine is switched on.

• When the machine is moving and installing,

the machine must be in flat. When moving the

machine, pulling the handle to move it.

• Connect to the water supply. The machines are

not suitable for connection to portable water

mains. Connect the machine to the water

supply. (It can be a water container).

• Make sure the inlet water pressure keeps

between 0.01MPa and 0.4MPa.The inlet pipe

should at least 5 M long. Do not use the pipe if

the pipe is damaged. If you want connect this

machine to portable water mains, you must

install a backflow preventer in the water pipe

to prevent dirty water flow back to the drinking

water system. The backflow preventer shall

comply with EN 60335-2-79 ANNEX AA.

3. ASSEMBLY AND USE

The motor of this pressure washer will

NOT run. It will only operate when the

trigger is squeezed.

• Turn the motor switch to the “0” position.

• Check that the electrical supply voltage and

frequency (Volts/Hz) correspond to those

specified on the cleaner data plate.

• Ensure that you have a suitable water supply

to feed the pressure washer.

• Connect the outlet hose to the washer and

connect the spray gun to the outlet hose.

• Connect lance and lance extension.

• Check gauze filter is clear of any blockage.

• Connect the water supply hose.

• Check that the hose has no kinks in it.

• Turn on water and check for leaks.

• Squeeze trigger to allow air to be expelled

though the pump and hoses, lock trigger.

• Plug in machine and turn on switch.

• Unlock trigger and use the pressure washer.

Shut down

1.

Turn off the motor (push switch to the off position).

2. Unplug the unit from the power source.

3. Turn off the water supply.

4. Press the trigger of the gun to depressurize the

system.

5. Disconnect the garden hose from the pressure

washer.

6. Wipe all surfaces of the unit with a damp clean

cloth.

7. Engage the gun safety lock.

CAUTION: ALWAYS turn off the unit’s

motor BEFORE turning off the unit’s

water supply. Serious damage could

occur to the motor if the unit is run

without water.

CAUTION: NEVER disconnect the high-

pressure discharge hose from the

machine while the system is still

pressurized. To depressurize the unit,

turn off the motor, turn off the water

supply and squeeze the trigger 2-3 times.

Water supply

•

Ensure that you have a suitable water supply

to feed the pressure washer. Check that all

connections are tight and there are no leaks in

the hose.

• The supply tap should be fully open (do not

turn on the pressure washer yet).

• Now depress the trigger (unlock trigger lock

first) to let water pass through the unit and

expel any air.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos FERM GRM1022 Nettoyeur haute pression. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter FERM. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre FERM GRM1022 Nettoyeur haute pression dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour FERM Nettoyeurs haute pression
Plus de modes d’emploi de Nettoyeurs haute pression

Foire aux questions sur FERM GRM1022 Nettoyeur haute pression

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

FERM GRM1026 Nettoyeur haute pression

Mode d’emploi

FERM GRM1003 Nettoyeur haute pression

Mode d’emploi

FERM GRM1023 Nettoyeur haute pression

Mode d’emploi

FERM GRM1008 Nettoyeur haute pression

Mode d’emploi

FERM GRM1007 Nettoyeur haute pression

Mode d’emploi

FERM GRM1005 Nettoyeur haute pression

Mode d’emploi

FERM GRM1006 Nettoyeur haute pression

Mode d’emploi

FERM GRM1002 Nettoyeur haute pression

Catégories associées